nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

LiDAR Based System for Tracking Loader Crane Operator

verfasst von : Karol Miądlicki, Mateusz Saków

Erschienen in: Advances in Manufacturing II

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Nowadays, particularly in the IoT, industry 4.0, smart devices, intelligent robots and autonomous vehicles, the segmentation and analysis of the environment using 3D data (point clouds) is a current and relevant research topic. The reducing prices of depth sensors based on light detection and ranging (LIDAR), time of flight (ToF), radio detection and ranging (RADAR) technologies and high computing power, facilitate the development of intelligent systems. In this work real-time LiDAR based system for tracking loader crane operator has been presented. Developed system uses a Velodyne VLP-16 LiDAR to detect and track loader crane operator and is fully integrated with open-source ROS (Robot Operating System). This solution will help to determine whether the operator is in the crane working zone, which will increase his safety. The work presents the main assumptions of the system, subsequent stages of point clouds processing and used algorithms. Detection and tracking algorithms performance was evaluated based on real data acquired under different conditions, and the results were compared to similar solutions found in the literature. The results of conducted test were presented. Furthermore, in this article, we discussed other methods used to detect and track humans in real time, described Velodyne VLP-16 scanner, robot operating system and data processing methods.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Intelligent Systems in the Railway Freight Management

Nächstes Kapitel Artificial Neural Network-Supported Selection of Materials in Ecodesign

Sanjaya, K., Henning, F., Purba, K.R.: 3D LIDAR city model application and marketing plan development. In: International Conference on Soft Computing, Intelligent System and Information Technology: Building Intelligence Through IOT and Big Data, pp. 238–242. IEEE (2018)

Gopalakrishnan, R., Thomas, V.A., Wynne, R.H., Coulston, J.W., Fox, T.R.: Shrub detection using disparate airborne laser scanning acquisitions over varied forest cover types. Int. J. Remote Sens. 39, 1220–1242 (2018)CrossRef

Zhou, Q., Tan, Z., Yang, C.: Theoretical limit evaluation of ranging accuracy and power for LiDAR systems in autonomous cars. Opt. Eng. 57, 1–8 (2018)

Malavazi, F.B.P., Guyonneau, R., Fasquel, J.B., Lagrange, S., Mercier, F.: LiDAR-only based navigation algorithm for an autonomous agricultural robot. Comput. Electron. Agric. 154, 71–79 (2018)CrossRef

Sakib, M.N., Rahman, M.A.: Traffic bottleneck reconstruction LIDAR orthoimages: a RANSAC algorithm feature extraction. Adv. Intell. Syst. Comput. 843, 302–307 (2018)

Wu, J., Xu, H., Zheng, Y., Tian, Z.: A novel method of vehicle-pedestrian near-crash identification with roadside LiDAR data. Accid. Anal. Prev. 121, 238–249 (2018)CrossRef

Nakashima, K., Jung, H., Oto, Y., Iwashita, Y., Kurazume, R., Mozos, O.M.: Learning geometric and photometric features from panoramic LiDAR scans for outdoor place categorization. Adv. Robot. 32, 750–765 (2018)CrossRef

Herbin, P., Pajor, M.: The torque control system of exoskeleton ExoArm 7-DOF used in bilateral teleoperation system. In: AIP Conference Proceedings, pp. 020020–020020-9 (2018)

Pajor, M., Grudziński, M., Marchewka, Ł.: Stereovision system for motion tracking and position error compensation of loading crane. In: AIP Conference Proceedings, pp. 020050–020050-10 (2018)

10.

Jasiewicz, M., Miądlicki, K., Powałka, B.: Assistance of machining parameters selection for slender tools in CNC control. In: AIP Conference Proceedings, pp. 020024–020024-10 (2018)

11.

Jasiewicz, M., Powalka, B.: Identification of a lathe spindle dynamics using extended inverse receptance coupling. J. Dyn. Syst. Meas. Control 140(12), 121015-1–121015-11 (2018)CrossRef

12.

Jasiewicz, M., Powałka, B.: Prediction of turning stability using receptance coupling. In: AIP Conference Proceedings, pp. 100005-1–100005-9 (2018)

13.

Majewski, M., Kacalak, W., Budniak, Z., Pajor, M.: Interactive control systems for mobile cranes. Adv. Intell. Syst. Comput. 1, 10–19 (2018)

14.

Rybarczyk, D., Owczarek, P., Myszkowski, A.: Development of force feedback controller for the loader crane. In: Advances in Manufacturing. Lecture Notes in Mechanical Engineering, pp. 345–354. Springer (2018)

15.

Myszkowski, A., Bartkowiak, T., Staniek, R.: Novel type of biaxial wheel-type haptic input device with MR-brakes to control hydraulic multi-axis manipulators. In: Volume 4A: Dynamics, Vibration, and Control, pp. 71300-1–71300-6. ASME (2017)

16.

Westerberg, S., Manchester, I.R., Mettin, U., Hera, P.L, Shiriaev, A.: Virtual environment teleoperation of a hydraulic forestry crane. In: IEEE International Conference on Robotics and Automation, pp. 4049–4054. IEEE (2008)

17.

Lagerev, I.A., Lagerev, A.V.: Universal mathematical model of a hydraulic loader crane. In: IOP Conference Series: Earth and Environmental Science, vol. 194, pp. 032015-1–032015-6 (2018)

18.

Miądlicki, K., Pajor, M.: Overview of user interfaces used in load lifting devices. Int. J. Sci. Eng. Res. 6, 1215–1220 (2015)

19.

Majewski, M., Kacalak, W.: Human-machine speech-based interfaces with augmented reality and interactive systems for controlling mobile cranes. Lecture Notes in Computer Science, pp. 89–98. Springer (2016)

20.

Majewski, M., Kacalak, W.: Intelligent speech-based interactive communication between mobile cranes and their human operators. Lecture Notes in Computer Science, pp. 523–530. Springer (2016)

21.

Saków, M., Miądlicki, K., Parus, A.: Self-sensing teleoperation system based on 1-DOF pneumatic manipulator. J. Autom. Mob. Robot. Intell. Syst. 11, 64–76 (2017)

22.

Saków, M., Parus, A., Pajor, M., Miądlicki, K.: Nonlinear inverse modeling with signal prediction in bilateral teleoperation with force-feedback. In: 22nd International Conference on Methods and Models in Automation and Robotics, pp. 141–146. IEEE (2017)

23.

Saków, M., Miądlicki, K.: Transport delay and first order inertia time signal prediction dedicated to teleoperation. In: Advances in Automation, Robotics and Measurement Techniques, pp. 142–151. Springer (2018)

24.

Saków, M., Parus, A., Pajor, M., Miadlicki, K.: Unilateral hydraulic telemanipulation system for operation in machining work area. In: Advances in Manufacturing. Lecture Notes in Mechanical Engineering, pp. 415–425. Springer (2018)

25.

Herbin, P., Pajor, M.: Interactive 7-DOF motion controller of the operator arm (ExoArm 7-DOF). In: International Conference on Innovations in Intelligent Systems and Applications, pp. 185–188. IEEE (2017)

26.

Saków, M., Marchelek, K., Parus, A., Pajor, M., Miądlicki, K.: Signal prediction in bilateral teleoperation with force-feedback. In: Proceedings in Mathematics and Statistics, pp. 311–323. Springer (2018)

27.

Sakow, M., Marchelek, K.: Model-free and time-constant prediction for closed-loop systems with time delay. Control Eng. Pract. 81, 1–8 (2018)CrossRef

28.

Herbin, P., Pajor, M.: ExoArm 7-DOF (interactive 7-DOF motion controller of the operator arm) master device for control of loading crane. In: Advances in Manufacturing. Lecture Notes in Mechanical Engineering, pp. 439–449. Springer (2018)

29.

Herbin, P.: Design and modeling of an exoskeleton torque sensor. Sci. J. Marit. Univ. Szczecin 51(123), 89–94 (2017)

30.

Berczyński, S., Lachowicz, M., Pajor, M.: An improved method of approximating frequency characteristics in the problem of modal analysis and its applications. Comput. Eng. 30, 575–584 (2001)

31.

Pulikowski, D., Lackner, F., Scheuerlein, C., Meinel, D., Savary, F., Tommasini, D., Pajor, M.: Testing mechanical behavior of Nb3Sn Rutherford cable during coil winding. IEEE Trans. Appl. Supercond. 27, 1–5 (2017)CrossRef

32.

Pajor, M., Marchelek, K., Powałka, B.: Experimental verification of method of machine tool-cutting process system model reduction in face milling. Comput. Methods Exp. Meas. 22, 503–512 (1999)

33.

Glennie, C.L., Kusari, A., Facchin, A.: Calibration and stability analysis of the VLP-16 laser scanner. Int. Arch. Photogram. Remote Sens. Spat. Inf. Sci. - ISPRS Arch. 40, 55–60 (2016)CrossRef

34.

Miądlicki, K., Pajor, M., Saków, M.: Ground plane estimation from sparse LIDAR data for loader crane sensor fusion system. In: 2nd International Conference on Methods and Models in Automation and Robotics, pp. 717–722. IEEE (2017)

35.

Miadlicki, K., Pajor, M., Saków M.: Real-time ground filtration method for a loader crane environment monitoring system using sparse LIDAR data. In: International Conference on Innovations in Intelligent Systems and Applications, pp. 207–212. IEEE (2017)

36.

Miadlicki, K., Pajor, M., Saków, M., Loader crane working area monitoring system based on LIDAR scanner. In: Advances in Manufacturing. Lecture Notes in Mechanical Engineering, pp. 465–474. Springer (2018)

37.

Bogoslavskyi, I., Stachniss, C.: Fast range image-based segmentation of sparse 3D laser scans for online operation. In: IEEE International Conference on Intelligent Robots and Systems, pp. 163–169. IEEE (2016)

38.

Bogoslavskyi, I., Stachniss, C.: Analyzing the quality of matched 3D point clouds of objects. In: International Conference on Intelligent Robots and Systems, pp. 6685–6690. IEEE (2017)

39.

Bogoslavskyi, I., Stachniss, C.: Efficient online segmentation for sparse 3D laser scans. Photogram. Fernerkundung Geoinf. 85, 41–52 (2017)

40.

Koide, K., Miura J.: A Portable person behavior measurement system using a 3D LIDAR. In: The Proceedings of JSME Annual Conference on Robotics and Mechatronics (Robomec), pp. 11–111. IEEE (2017)CrossRef

Titel: LiDAR Based System for Tracking Loader Crane Operator
verfasst von: Karol Miądlicki
Mateusz Saków
Verlag: Springer International Publishing
Buch: Advances in Manufacturing II
Print ISBN: 978-3-030-18714-9

Electronic ISBN: 978-3-030-18715-6

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-18715-6_34

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"