nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

6. Cross-Linkable Bio and Mineral Fillers for Reactive Polymer Composites: Processing and Characterization

verfasst von : Jelena D. Rusmirović, Tihomir M. Kovačević, Saša J. Brzić, Aleksandar D. Marinković

Erschienen in: Reactive and Functional Polymers Volume Two

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

It has been found that polymer composites possess advanced mechanical and thermal performances after being loaded with functional/reactive bio or mineral fillers. The high bonding strength between the polymer matrix and the fillers represents a crucial factor for obtaining a good reinforcement in the composite materials. Many techniques have been developed for chemical functionalization of the filler surface to improve its bonding strength, compatibility and dispersibility within polymer matrices, and also to prevent deterioration of the structure. Thus, reactive cross-linkable groups showing high reactivity toward the target functional groups of the polymer matrix have been attached to the filler surface. However, the introduction of reactive residues onto the filler surface, such as vinyl and epoxy functionalized molecules, provides polymerizable centers convenient for copolymerization with corresponding groups in monomer chains. This chapter aims to present a comprehensive review of various chemical modification techniques applied to obtain reactive cross-linkable bio and mineral fillers suitable for copolymerization with polymer matrices. It also covers the analysis of the processing and reinforcement properties of reactive polymer/modified filler-based composites.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Crosslinking of Polymers: Rubber Vulcanization

Nächstes Kapitel Functional Crosslinked Hydrogels

Abdelmouleh, M., Boufi, S., Belgacem, M. N., Dufresne, A., & Gandini, A. (2005). Modification of cellulose fibers with functionalized silanes: Effect of the fiber treatment on the mechanical performances of cellulose-thermoset composites. Journal of Applied Polymer Science, 98(3), 974–984. https://doi.org/10.1002/app.22133.CrossRef

Abenojar, J., Tutor, J., Ballesteros, Y., del Real, J. C., & Martínez, M. A. (2017). Erosion-wear, mechanical and thermal properties of silica filled epoxy nanocomposites. Composites. Part B, Engineering, 120, 42–53. https://doi.org/10.1016/j.compositesb.2017.03.047.CrossRef

Akpan, E. I., Shen, X., Wetzel, B., & Friedrich, K. (2019). Design and synthesis of polymer nanocomposites. In K. Pielichowski & T. M. Majka (Eds.), Polymer composites with functionalized nanoparticles: Synthesis, properties, and applications (pp. 47–83). Pp: Elsevier. https://doi.org/10.1016/b978-0-12-814064-2.00002-0.CrossRef

Almasi, H., Ghanbarzadeh, B., Dehghannya, J., Entezami, A. A., & Asl, A. K. (2015). Novel nanocomposites based on fatty acid modified cellulose nanofibers/poly(lactic acid): Morphological and physical properties. Food Packaging and Shelf Life, 5, 21–31. https://doi.org/10.1016/j.fpsl.2015.04.003.CrossRef

Bagherpour, S. (2012). Fibre reinforced polyester composites. In H. Saleh (Ed.), Polyester (pp. 135–166). Pp: InTech. https://doi.org/10.5772/48697.CrossRef

Bagwe, R. P., Hilliard, L. R., & Tan, W. (2006). Surface modification of silica nanoparticles to reduce aggregation and nonspecific binding. Langmuir, 22(9), 4357–4362. https://doi.org/10.1021/la052797j.CrossRef

Bayer, J., Granda, L. A., Méndez, J. A., Pèlach, M. A., Vilaseca, F., & Mutjé, P. (2016). Cellulose polymer composites (WPC). In M. Fan and F. Fu (Eds.), Advanced High Strength Nature Fibre Composites in Construction (pp. 115–139). ISBN: 978-0-08-100411-1: Woodhead Publishing. https://doi.org/10.1016/b978-0-08-100411-1.00005-4.

Bracone, M., Merino, D., González, J., Alvarez, V. A., & Gutiérrez, T. J. (2016). Chapter 6. Nanopackaging from natural fillers and biopolymers for the development of active and intelligent films. In S. Ikram & S. Ahmed (Eds.), Natural polymers: Derivatives, blends and composites (pp. 119–155). New York.. EE.UU. ISBN: 978-1-63485-831-1: Editorial Nova Science Publishers.

Brzić, S., Bogosavljević, M., Ušćumlić, G., & Jelisavac, L. (2016). Effect of tris(2,3-epoxypropyl)isocyanurate on dynamic modulus of CTBN-based composite rocket propellant. Scientific Technical Review, 68(4), 18–27. https://doi.org/10.5937/str1602018b.CrossRef

Çakir, M., Simsek, R., & Çelik, A. A. (2015). Effect of surface modification of fumed-silica on mechanical properties of unsaturated polyester composites. Asian J. Chem, 27(11), 4120–41204.

Cao, X., Dong, H., & Li, C. M. (2007). New nanocomposite materials reinforced with cellulose nanocrystals in waterborne polyurethane. Biomacromolecules, 8(3), 899–904. https://doi.org/10.1021/bm0610368.CrossRef

Çetin, N. S., Tingaut, P., Özmen, N., Henry, N., Harper, D., Dadmun, M., & Giles, S. (2009). Acetylation of cellulose nanowhiskers with vinyl acetate under moderate conditions. Macromolecular Bioscience, 9(10), 997–1003. https://doi.org/10.1002/mabi.200900073.CrossRef

Chuang, W., Geng-Sheng, J., Lei, P., Bao-lin, Z., Ke-Zhi, L., & Jun-long, W. (2018). Influences of surface modification of nano-silica by silane coupling agents on the thermal and frictional properties of cyanate ester resin. Results Physics, 9, 886–896. https://doi.org/10.1016/j.rinp.2018.03.056.CrossRef

Chung, D. D. L. (2017). Polymer-matrix composites: Structure and processing. In D. D. L. Chung (Ed.), Carbon composites: Composites with carbon fibers, nanofibers and nanotubes (pp. 161–217). Pp: Butterworth-Heinemann. https://doi.org/10.1016/b978-0-12-804459-9.00003-8.CrossRef

Dearmitt, C., & Rothon, R. (2014). Surface modifiers for use with particulate fillers. In S. Palsule (Ed.), Polymers and polymeric composites: A reference series (pp. 1–22). Berlin, Heidelberg: Springer. https://doi.org/10.1007/978-3-642-37179-0_8-2.CrossRef

Dittanet, P., Pearson, R. A., & Kongkachuichay, P. (2017). Thermo-mechanical behaviors and moisture absorption of silica nanoparticle reinforcement in epoxy resins. International Journal of Adhesion and Adhesives, 78, 74–82. https://doi.org/10.1016/j.ijadhadh.2017.06.006.CrossRef

Drah, A., Kovačević, T., Rusmirović, J., Tomić, N., Brzić, S., Bogosavljavić, M., & Marinković, A. (2019). Effect of surface activation of alumina particles on the performances of thermosetting-based composite materials. Journal of Composite Materials, 53(19). https://doi.org/10.1177/0021998319839133.

Drah, A., Tomić, N. Z,. Kovačević,.T., Djokić,V., Tomić,M., Heinemann, R. J,. Marinković, A. (2020) Structurally and surface-modified alumina particles as a reinforcement in polyester-based composites with an improved toughness. Mechanics of Composite Materials, 56, 249–260. https://doi.org/10.1007/s11029-020-09877-3.

Dufresne, A. (2010). Processing of polymer nanocomposites reinforced with polysaccharide nanocrystals. Molecules, 15(6), 4111–4128. https://doi.org/10.3390/molecules15064111.CrossRef

Dufresne, A. (2012). Chemical modification of nanocellulose. In: Nanocellulose: From nature to high performance tailored materials. De Gruyter. Pp. 147-192. https://doi.org/10.1515/9783110254600.147.

Dufresne, A. (2013). Nanocellulose: A new ageless bionanomaterial. Materials Today, 16(6), 220–227. https://doi.org/10.1016/j.mattod.2013.06.004.CrossRef

Durán, N., Lemes, A., Durán, M., Freer, J., & Baeza, J. (2011). A minireview of cellulose nanocrystals and its potential integration as co-products in biethanol production. Journal of the Chilean Chemical Society, 56(2), 672–677. https://doi.org/10.4067/S0717-97072011000200011.CrossRef

Đurđević, V., Kovačević, T., Rusmirović, J., Božić, A., Tomić, N., Nešić, J., & Brzić, S. (2017). Application of the waste polymeric material from processing of opticala lenses as a reinforcement in unsaturated polyester based on waste PET. 4^th Sci. Conference Politeh, 2017, 29–34.

Faruk, O., & Sain, M. (2016). Lignin in polymer composites, William Andrew, Pp. 350. https://doi.org/10.1016/c2014-0-01101-x.

Gun’ko, V. M. (2019). Polymer composites with functionalized silica. In K. Pielichowski &T. M. Majka (Eds.), Polymer composites with functionalized nanoparticles: Synthesis, properties, and applications (pp. 119–148). Elsevier. https://doi.org/10.1016/b978-0-12-814064-2.00004-4.CrossRef

Gutiérrez, T. J., Alvarez, V. A., & V. A. (2017a). Cellulosic materials as natural fillers in starch-containing matrix-based films: A review. Polymer Bulletin, 74(6), 2401–2430. https://doi.org/10.1007/s00289-016-1814-0.CrossRef

Gutiérrez, T. J., González Seligra, P., Medina Jaramillo, C., Famá, L., & Goyanes, S. (2017b). Chapter 14. Effect of filler properties on the antioxidant response of thermoplastic starch composites. In V. K. Thakur, M. K. Thakur, & M. R. Kessler (Eds.), Handbook of composites from renewable materials (pp. 337–370). WILEY-Scrivener Publisher. EE.UU. ISBN: 978-1-119-22362-7. https://doi.org/10.1002/9781119441632.ch14.

Gutiérrez, T. J., Toro-Márquez, L. A., Merino, D., & Mendieta, J. R. (2019). Hydrogen-bonding interactions and compostability of bionanocomposite films prepared from corn starch and nano-fillers with and without added Jamaica flower extract. Food Hydrocolloids, 89, 283–293. https://doi.org/10.1016/j.foodhyd.2018.10.058.CrossRef

Herniou--Julien, C., Mendieta, J. R., & Gutiérrez, T. J. (2019). Characterization of biodegradable/non-compostable films made from cellulose acetate/corn starch blends processed under reactive extrusion conditions. Food Hydrocolloids, 89, 67–79. https://doi.org/10.1016/j.foodhyd.2018.10.024.CrossRef

Hosseini, S. A., Lin, L., & Ko, F. (2017). Investigation of the mechanical properties of lignin nanofibrous structures using statistical modeling. Textile Research Journal, 88(17), 1943–1953. https://doi.org/10.1177/0040517517715080.CrossRef

Jeon, C. W., Park, S., Bang, J.-H., Chae, S., Song, K., & Lee, S.-W. (2018). Nonpolar surface modification using fatty acids and its effect on calcite from mineral carbonation of desulfurized gypsum. Coatings, 8(1), 43. https://doi.org/10.3390/coatings8010043.CrossRef

Jin, B., Zhang, W., Sun, G., & Gu, H-B. (2007). Fabrication and characterization of ethylenevinyl acetate copolymer Al₂O₃ nanocomposites. Journal of Ceramic Processing Research, 8(5), 336–340. Available in: http://jcpr.kbs-lab.co.kr/file/jcpr_vol.8_2007/jcpr8-5/vol.8,no.5,pp.336~340_2007.pdf.

Junior de Menezes, A., Siqueira, G., Curvelo, A. A. S., & Dufresne, A. (2009). Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites. Polymer, 50(19), 4552–4563. https://doi.org/10.1016/j.polymer.2009.07.038.CrossRef

Kango, S., Kalia, S., Celli, A., Njuguna, J., Habibi, Y., & Kumar, R. (2013). Surface modification of inorganic nanoparticles for development of organic-inorganic nanocomposites-A review. Progress in Polymer Science, 38(8), 1232–1261. https://doi.org/10.1016/j.progpolymsci.2013.02.003.CrossRef

Kanimozhi, K., Prabunathan, P., Selvaraj, V., & Alagar, M. (2014). Vinyl silane-functionalized rice husk ash-reinforced unsaturated polyester nanocomposites. RSC Advances, 4(35), 18157–18163. https://doi.org/10.1039/c4ra01125b.CrossRef

Kargarzadeh, H., Sheltami, R. M., Ahmad, I., Abdullah, I., & Dufresne, A. (2015). Cellulose nanocrystal: A promising toughening agent for unsaturated polyester nanocomposite. Polymer, 56, 346–357. https://doi.org/10.1016/j.polymer.2014.11.054.CrossRef

Khalil, H. P. S. A., Dungani, R., Hossain, M. S., Suraya, N. L. M., Aprilia, S., Astimar, A. A., Hayawin, Z. N., & Davoudpour, Y. (2015). Mechanical properties of oil palm biocomposites enhanced with micro to nanobiofillers. In M. Misra, J. K. Pandey, & A. K. Mohanty (Eds.), Biocomposites: Design and mechanical performance (pp. 401–435). Woodhead Publishing. https://doi.org/10.1016/b978-1-78242-373-7.00026-3.CrossRef

Kovačević, T., Drah, A., Božić, A., Stamenović, M., Rusmirović, J., Tomić, N., Alivojvodić, V., & Marinković, A. (2018). The surface modification of alumina particles for its application in unsaturated polyester resins. 26^th Int. Conf. Ecol. Truth Environ. Res. 338–342.

Kovačević, T., Rusmirović, J., Tomić, N., Marinović-Cincović, M., Kamberović, Ž., Tomić, M., & Marinković, A. (2017). New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties. Composites. Part B, Engineering, 127, 1–14. https://doi.org/10.1016/j.compositesb.2017.06.020.CrossRef

Kovačević, T., Rusmirović, J., Tomić, N., Mladenović, G., Milošević, M., Mitrović, N., & Marinković, A. (2019). Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites. Polymer Composites, 40(3), 1170–1186. https://doi.org/10.1002/pc.24827.CrossRef

Kovačević, T. M. (2018). The influence of modified micro-particles from nonmetallic fraction of waste printed circuit boards on mechanical and thermal properties of polyester resin sinthesized from waste poly(ethylene terephthalate). University of Belgrade; 160.

Lin, J., Zhong, B., Jia, Z., Hu, D., Ding, Y., Luo, Y., & Demin, Y. (2017). In-situ fabrication of halloysite nanotubes/silica nano hybrid and its application in unsaturated polyester resin. Applied Surface Science, 407, 130–136. https://doi.org/10.1016/j.apsusc.2017.02.149.CrossRef

Mallakpour, S., & Dinari, M. (2013). Investigating the nanostructure and thermal properties of chiral poly(amide-imide)/Al₂O₃ compatibilized with 3-aminopropyltriethoxysilane. Materials Research Bulletin, 48(10), 3865–3872. https://doi.org/10.1016/j.materresbull.2013.05.095.CrossRef

Mallakpour, S., & Khadem, E. (2014). Recent development in the synthesis of polymer nanocomposites based on nano-alumina. Progress in Polymer Science, 51, 74–93. https://doi.org/10.1016/j.progpolymsci.2015.07.004.CrossRef

Malutan, T., Nicu, R., & Popa, V. I. (2008). Lignin modification by epoxidation. BioResources, 3(4), 1371–1376. Available in: https://ojs.cnr.ncsu.edu/index.php/biores/article/view/biores_03_4_1371_malutan_np_lignin_mod_epoxidation/289.

Merino, D., Gutiérrez, T. J., & Alvarez, V. A. (2019). Structural and thermal properties of agricultural mulch films based on native and oxidized corn starch nanocomposites. Starch-Stärke, 71(7–8), 1800341. https://doi.org/10.1002/star.201800341.CrossRef

Merino, D., Gutiérrez, T. J., Mansilla, A. Y., Casalongué, C., & Alvarez, V. A. (2018). Critical evaluation of starch-based antibacterial nanocomposites as agricultural mulch films: Study on their interactions with water and light. ACS Sustainable Chemistry & Engineering, 6(11), 15662–15672. https://doi.org/10.1021/acssuschemeng.8b04162.CrossRef

Miranda-Hernández, J. G., Moreno-Guerrero, S., Soto-Guzmán, A. B., & Rocha-Rangel, E. (2006). Processing research production and characterization of. Al₂O₃-Cu composite materials., 7(4), 311–314.

Mohammad, N. A. B. (2007). Synthesis, characterization and properties of of the new unsaturated polyester resins for composite applications, 39. Available in: http://eprints.usm.my/29361/1/Synthesis,_characterization_and_properties_of_the_new_unsaturated_polyester_resins_for_composite_applications.pdf

Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011). Cellulose nanomaterials review: Structure, properties and nanocomposites. Chemical Society Reviews, 40(7), 3941–3994. https://doi.org/10.1039/c0cs00108b.CrossRef

Muthu, J., & Dendere, C. (2014). Functionalized multiwall carbon nanotubes strengthened GRP hybrid composites: Improved properties with optimum fiber content. Composites. Part B, Engineering, 67, 84–94. https://doi.org/10.1016/j.compositesb.2014.06.012.CrossRef

Nordström, J., Matić, A., Sun, J., Forsyth, M., & MacFarlane, D. R. (2010). Aggregation, ageing and transport properties of surface modified fumed silica dispersions. Soft Matter, 6(10), 2293. https://doi.org/10.1039/b921488g.CrossRef

Oğuz, O., Monfared Zanjani, J. S., Soytaş, S. H., & Menceloğlu, Y. Z. (2019). Specific interactions and self-organization in polymer/functionalized nanoparticle systems. In K. Pielichowski & T. M. Majka (Eds.), Polymer composites with functionalized nanoparticles: Synthesis, properties, and applications (pp. 85–117). Elsevier. https://doi.org/10.1016/b978-0-12-814064-2.00003-2.CrossRef

Pasquini, D., Teixeira, E de M, Curvelo, AA da S, Belgacem, M. N., & Dufresne, A. (2010). Extraction of cellulose whiskers from cassava bagasse and their applications as reinforcing agent in natural rubber. Industrial Crops and Products, 32(3), 486–490. https://doi.org/10.1016/j.indcrop.2010.06.022.CrossRef

Prieur, B., Meub, M., Wittemann, M., Klein, R., Bellayer, S., Fontaine, G., & Bourbigot, B. (2016). Phosphorylation of lignin to flame retard acrylonitrile butadiene styrene (ABS). Polymer Degradation and Stability, 127, 32–43. https://doi.org/10.1016/j.polymdegradstab.2016.01.015.CrossRef

Popović A., Rusmirović J.D., Veličković Z., Radovanović Ž., Ristić M., Pavlović V., Marinković A., (2020). Novel amino-functionalized lignin microspheres: High performance biosorbent with enhanced capacity for heavy metal ion removal. International Journal of Biological Macromolecules, 156, 1160–1173. https://doi 10.1016/j.ijbiomac.2019.11.152

Pu, Y., Zhang, J., Elder, T., Deng, Y., Gatenholm, P., & Ragauskas, A. J. (2007). Investigation into nanocellulosics versus acacia reinforced acrylic films. Composites. Part B, Engineering, 38(3), 360–366. https://doi.org/10.1016/j.compositesb.2006.07.008.CrossRef

Qin, J., Woloctt, M., & Zhang, J. (2014). Use of polycarboxylic acid derived from partially depolymerized lignin as a curing agent for epoxy application. ACS Sustainable Chemistry & Engineering, 2(2), 188–193. https://doi.org/10.1021/sc400227v.CrossRef

Radoman, T., Terzić, N., Spasojević, P., Džunuzović, J. V., Marinković, A., Jeremić, K., & Džunuzović, E. S. (2015a). Synthesis and characterization of the surface modified titanium dioxide/epoxy nanocomposites. Advance Technology, 4(1), 7–15. https://doi.org/10.5937/savteh1501007r.CrossRef

Radoman, T. S., Trifković, K., Palija, T., Marinković, A. D., Bugarski, B., & Džunuzović, E. S. (2015b). Effect of surface modified TiO₂ nanoparticles on thermal, barrier and mechanical properties of long oil alkyd resin-based coatings. Express Polym. Letters, 9(10), 916–931. https://doi.org/10.3144/expresspolymlett.2015.83.CrossRef

Rančić, M., Rusmirović, J., Popović, I., & Marinković, A. (2015). Isolation and chemical modification of nanocellulose nanocrystals for reinforcement of nanocomposites. Wood Technol. Prod. Des. 2^nd Int. Sci. Conf. Ohrid, Macedonia; 327–355.

Ranjan, R. (2008). Surface modification of silica nanoparticles. The University of Akron, 150.

Roohani, M., Habibi, Y., Belgacem, N. M., Ebrahim, G., Karimi, A. N., & Dufresne, A. (2008). Cellulose whiskers reinforced polyvinyl alcohol copolymers nanocomposites. European Polymer Journal, 44(8), 2489–2498. https://doi.org/10.1016/j.eurpolymj.2008.05.024.CrossRef

Rothon, R. N. (2002). Particulate fillers for polymers. Rapra Technology Limited; 12(9):161. Available in: http://www.polymerjournals.com/pdfdownload/844670.pdf

Rusmirovic, J., Božić, A., Stamenović, M., Spasojević, P., Rančić, M., Stojiljkovic, I., & Marinković, A. (2016). Alkyd nanocomposite coatings based on waste PET glicolyzates and modified silica nanoparticles. Zašt. Material, 57(1), 47–54. https://doi.org/10.5937/zasmat1601047r.CrossRef

Rusmirović, J., Daničić, D., Kovačević, T., Bogosavljević, M., Brzić, S., Marinković, A., & Stevanović, T. (2018a). Phosphorylated kraft lignin based flame retardant: Efficient method for improvement of lignin flame retardancy and mechanical action in polyester. 8^th Int. Sci. Conf. Defensive Technol. 538–543.

Rusmirović, J. D. (2016). Dynamic-mechanical and thermal properties of composites based on unsaturated polyester resins and modified silicon-dioxide and callulose nanoparticles. University of Belgrade; 186.

Rusmirović, J. D., Ivanović, J. Z., Pavlović, V. B., Rakić, V. M., Rančić, M. P., Đokić, V., & Marinković, A. (2017a). Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. Carbohydrate Polymers, 164, 64–74. https://doi.org/10.1016/j.carbpol.2017.01.086.CrossRef

Rusmirović, J. D., Radoman, T., Džunuzović, E. S., Džunuzović, J. V., Markovski, J., Spasojević, P., & Marinković, A. (2017b). Effect of the modified silica nanofiller on the mechanical properties of unsaturated polyester resins based on recycled polyethylene terephthalate. Polymer Composites, 38(3), 538–554. https://doi.org/10.1002/pc.23613.CrossRef

Rusmirović, J. D., Rančić, M. P., & Marinković, A. D. (2018b). Processing and characterization of modified nanocellulose/polyester composites. In T. Stevanović (Ed.), Chemistry of Lignocellulosics: Current Trends (pp. 167–213). Taylor & Francis Group, CRC Press. https://doi.org/10.1201/b20936-8.

Rusmirović, J. D., Rančić, M. P., Pavlović, V. B., Rakić, V. M., Stevanović, S., Djonlagić, J., & Marinković, A. (2018c). Cross-linkable modified nanocellulose/polyester resin-based composites: Effect of unsaturated fatty acid nanocellulose modification on material performances. Macromolecular Materials and Engineering, 303(8), 1700648. https://doi.org/10.1002/mame.201700648.CrossRef

Rusmirović, J. D., Trifković, K. T., Bugarski, B., Pavlović, V. B., Džunuzovic, J., Tomić, M., & Marinković, A. (2016). High performances unsaturated polyester based nanocomposites: Effect of vinyl modified nanosilica on mechanical properties. Express Polym. Letters, 10(2), 139–159. https://doi.org/10.3144/expresspolymlett.2016.14.CrossRef

Rusmirović, J. D., Lukić, V., Kovačević, T., Bogosavljević, M., Brzić, S., Marinković, A., & Stevanović, T. (2019) Fireproof phosphorylated kraft lignin/polyester based composites: Green material for rocket propellant thermal protection systems. Scientific and Technical Review, 69(1), 16–22. https://doi.org/10.5937/str1901016r.

Schorr, D., Niokhor, P., & Stevanović, T. (2014). Evaluation of industrial lignins for biocomposites production. Industrial Crops and Products, 52, 65–73. https://doi.org/10.1016/j.indcrop.2013.10.014.CrossRef

Scofield, J. D. (2003). A novel coupling agent technology. Polymers and Polymer Composites, 11(2), 67–75. https://doi.org/10.1177/096739110301100201.CrossRef

Soleimani, E., & Zamani, N. (2017). Surface modification of alumina nanoparticles: A dispersion study in organic media. Acta Chimica Slovenica, 64(3), 644–653. https://doi.org/10.17344/acsi.2017.3459.CrossRef

Spange, S. (2000). Silica surface modification by cationic polymerization and carbenium intermediates. Progress in Polymer Science, 25(6), 781–849. https://doi.org/10.1016/s0079-6700(00)00014-9.CrossRef

Tasić, A., Rusmirović, J. D., Nikolić, J., Božić, A., Pavlović, V., Marinković, A., & Uskoković, P. (2016). Effect of the vinyl modification of multi-walled carbon nanotubes on the performances of waste poly(ethylene terephthalate)-based nanocomposites. Journal of Composite Materials, 51(4), 1–15. https://doi.org/10.1177/0021998316648757.CrossRef

Thakur, V. K., Thakur, M. K., Raghavan, P., & Kessler, M. R. (2014). Progress in green polymer composites from lignin for multifunctional applications: A review. ACS Sustainable Chemistry & Engineering, 2(5), 1072–1092. https://doi.org/10.1021/sc500087z.CrossRef

Tomić, M. D., Dunjić, B., Likić, V., Bajat, J., Rogan, J., & Djonlagić, J. (2014). The use of nanoclay in preparation of epoxy anticorrosive coatings. Progress in Organic Coatings, 77(2), 518–527. https://doi.org/10.1016/j.porgcoat.2013.11.017.CrossRef

Toro-Márquez, L. A., Merino, D., & Gutiérrez, T. J. (2018). Bionanocomposite films prepared from corn starch with and without nanopackaged Jamaica (Hibiscus sabdariffa) flower extract. Food and Bioprocess Technology, 11(11), 1955–1973. https://doi.org/10.1007/s11947-018-2160-z.CrossRef

Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010). Silane coupling agents used for natural fiber/polymer composites: A review. Composites. Part A, Applied Science and Manufacturing, 41(7), 806–819. https://doi.org/10.1016/j.compositesa.2010.03.005.CrossRef

Xu, M., Cao, Y., & Gao, S. (2014). Surface modification of nano-silica with silane coupling agent. Key Engineering Materials, 636, 23–27. https://doi.org/10.4028/www.scientific.net/kem.636.23.CrossRef

Yue, L., Maiorana, A., Khelifa, F., Patel, A., Raquez, J. M., Bonnaud, L., Gross, R., Dubois, P., & Manas-Zloczower, I. (2018). Surface-modified cellulose nanocrystals for biobased epoxy nanocomposites. Polymer, 134, 155–162. https://doi.org/10.1016/j.polymer.2017.11.051.CrossRef

Zainuddin, S. Y. Z., Ahmad, I., Kargarzadeh, H., Abdullah, I., & Dufresne, A. (2013). Potential of using multiscale kenaf fibers as reinforcing filler in cassava starch-kenaf biocomposites. Carbohydrate Polymers, 92(2), 2299–2305. https://doi.org/10.1016/j.carbpol.2012.11.106.CrossRef

Zunjarrao, S. C., & Singh, R. P. (2006). Characterization of the fracture behavior of epoxy reinforced with nanometer and micrometer sized aluminum particles. Composites Science and Technology, 66(13), 2296–2305. https://doi.org/10.1016/j.compscitech.2005.12.001.CrossRef

Titel: Cross-Linkable Bio and Mineral Fillers for Reactive Polymer Composites: Processing and Characterization
verfasst von: Jelena D. Rusmirović
Tihomir M. Kovačević
Saša J. Brzić
Aleksandar D. Marinković
Verlag: Springer International Publishing
Buch: Reactive and Functional Polymers Volume Two
Print ISBN: 978-3-030-45134-9

Electronic ISBN: 978-3-030-45135-6

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-45135-6_6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht