nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

15. Design of Hybrid Composites from Scrap Aluminum Bronze Chips

verfasst von : L. F. P. Ferreira, E. Bayraktar, I. Miskioglu, D. Katundi

Erschienen in: Mechanics of Composite and Multi-functional Materials, Volume 7

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aluminum bronze material has high thermal conductivity, wear resistance, corrosion resistance, and good mechanical strength which is widely used in structural applications, grinding tools, etc. Certain studies have shown that these composites containing a small amount of iron and nickel exhibit improved bending strength and higher strain energy.

The main purpose of the present work is to apply the liquid phase sintering process to determine the optimal sintering conditions and to evaluate the interface of aluminum and the scrap aluminum bronze chips with different reinforcement elements (TiC, BN, Gr etc.). A second aspect of this work is to evaluate the effect of the sintering conditions on the microstructure and mechanical properties such as hardness and compression behavior. In the frame of the present work, an original idea of producing a hybrid composite has been developed by using scrap aluminum bronze chips. This consists of mixing and compacting aluminum with aluminum bronze (ASTM B148) chips through press moulding and sintering.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Thermal Cycling and Environmental Effect on Tensile Impact Behavior of Adhesive Single Lap Joints for Fiber Metal Laminate

Nächstes Kapitel Impact Response of Waste Poly Ethylene Terephthalate (PET) Composite Plate

Veasey, T.J., Wilson, R.J., Squires, D.M.: The physical separation and recovery of metals from wastes: process engineering for the chemical, metals and minerals industries, vol. 1. Gordon and Breach, Amsterdam (1993)

Skalova, L., Luka, J.: Optimization of recycling process of white bronze chips. 12th International Research/Expert Conference–TMT 2008, Turkey, Istanbul, August 2008, ISBN: 995861741-2

Gronostajski, J., Gronostajski, Z.: Sintering criterion in metal working processes. J. Mater. Process. Technol. 133, 99–102 (2003)CrossRef

van der Heide, E., Stama, E.D., Giraud, H., Lovato, G., Akdut, N., Clarysse, F., Caenen, P., Heikill, I.: Wear of aluminium bronze in sliding contact with lubricated stainless steel sheet material. Wear 261, 68–73 (2006)CrossRef

Pawlak, Z., Kaldonski, T., Pai, R., Bayraktar, E., Oloyede, A.: A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles: an additive in porous sliding bearings for a car clutch. Wear 267(5–8), 1198–1202 (2009)CrossRef

Lu, H., Wang, X., Zang, T., Cheng, Z., Feng, Q.: Design, fabrication, and properties of high damping metal matrix composites, a review. J. Mater. 2, 958–977 (2009)CrossRef

Bayraktar, E., Ayari, F., Tan, M.J., Tosun Bayraktar, A., Katundi, D.: Manufacturing of aluminum matrix composites reinforced with iron-oxide nanoparticles: microstructural and mechanical properties. In: Laughlin, D.E. (ed.) Metallurgical and Materials Transactions B, vol. 45, pp. 352–362. Springer, New York (2014)

Chmura, W., Gronostajski, Z.: Bearing composites made from aluminium and aluminium bronze chips. J. Mater. Process. Technol. 178, 188–193 (2006)CrossRef

Ferreira, L.-M.-P., Bayraktar, E., Robert, M.-H., Miskioglu, I.: Optimization of magnetic and electrical properties of new aluminium matrix composite reinforced with magnetic nano iron oxide. In: Zimmerman, K.B. (ed.) Mechanics of Composite and Multifunctional Materials, vol. 7, pp. 11–18. Springer, New York (2015). ISBN: 978-3-319-21761-1

10.

Bayraktar, E., Robert, M.-H., Miskioglu, I.: Design of Al-Nb2Al composites through powder metallurgy. In: Zimmerman, K.B. (ed.) Mechanics of Composite and Multifunctional Materials, vol. 7, pp. 131–139. Springer, New York (2015). ISBN: 978-3-319-21761-1

11.

Lu, H., Wang, X., Zhang, T., Cheng, Z., Fang, Q.: Design, fabrication, and properties of high damping metal, matrix composites—a review. Materials 2, 958–977 (2009). doi:10.3390/ma2030958 CrossRef

Titel: Design of Hybrid Composites from Scrap Aluminum Bronze Chips
verfasst von: L. F. P. Ferreira
E. Bayraktar
I. Miskioglu
D. Katundi
Verlag: Springer International Publishing
Buch: Mechanics of Composite and Multi-functional Materials, Volume 7
Print ISBN: 978-3-319-41765-3

Electronic ISBN: 978-3-319-41766-0

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-41766-0_15

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht