nach oben

Machine Vision and Applications

Erschienen in:

01.11.2013 | Original Paper

Development of an optical system for analysis of the ink–paper interaction

verfasst von: António de Oliveira Mendes, Paulo Torrão Fiadeiro, Ana Maria Matos Ramos, Sónia Cristina Lopes de Sousa

Erschienen in: Machine Vision and Applications | Ausgabe 8/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work is presented and described an optical system specifically designed and implemented to be applied for the study of the ink–paper interaction at the paper surface, considering the two main directions of the paper sheet (machine and cross directions). This work is particularly concerned with the system description, complete characterization, test, and its usage under real conditions. Concerning the system characterization, the main parameters were addressed and set having in mind its optimization. Relatively to the test of the system, several measurements using specific object samples with known dimensions were carried out to evaluate the accuracy of the obtained results. In terms of its usage under real conditions, an experiment was carried out using a commercial ink and common copy paper to dynamically collect data of its interaction. The collected data, after processing, enabled the determination of the main results of the analyzed ink–paper interaction, which allowed to reach the following conclusions; (1) the implemented system offers two different analysis approaches (qualitative and quantitative), both showing to be in agreement; and (2) the system also shows to be important to identify variations of the ink–paper interaction, manifested in the machine and cross directions of the paper.

Vorheriger Artikel Triangular traffic signs detection based on RSLD algorithm

Nächster Artikel Tracking-by-detection of multiple persons by a resample-move particle filter

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Koskela, J.P., Hormi, O.E.O.: Improving the printability of paper with long-chain quaternaries. Appita J. 56(4), 296–300 (2003)

Moutinho, I.M.T., Ferreira, P.J.T., Figueiredo, M.L.: Impact of surface sizing on inkjet printing quality. Ind. Eng. Chem. Res. 46(19), 6183–6188 (2007)CrossRef

Mendes de Sousa, A.P., Amaral, J.L., Oliveira, N.J., Torre, C., Evtuguin, D., Ferreira, P., Campos, M., Moutinho, I., Ramos, A.M., Sousa, S., Simões, R., Velho, J.L., Santos, N.: Estudo da Interacção Tinta-Papel em Impressão Inkjet. In: 20th Tecnicelpa Conference and Exhibition, Tomar, Portugal (2007)

Sousa, S., de Sousa, A.P.M., Koskela, J.P., Vaz, A., Ramos, A.: Long-chain quaternary EPK2 surface sizing and print quality evaluation. Appita J. 63(4), 300–307 (2010)

Fardim, P.: Paper and surface chemistry—part 2—coating and printability. TAPPI J. 1(9), 44–56 (2002)

Perelaer, J., Smith, P.J., Bosch, E.V.D., Grootel, S.S.C.V., Ketelaars, P.H.J.M., Schubert, U.S.: The spreading of inkjet-printed droplets with varying polymer molar mass on a dry solid substrate. Macromol. Chem. Phys. 210(6), 495–502 (2009)CrossRef

Xu, R., Fleming, P.D., Pekarovicova, A.: The effect of ink jet paper roughness on print gloss. J. Imaging Sci. Technol. 49(6), 660–665 (2005)

Pauler, N., Norberg, O., Edström, P.: Mechanisms involved in the optical interaction between ink and substrate for Home &Office inkjet printing. In: 36th International Research Conference on Advances in Printing and Media Technology, pp. 1–11. Stockholm, Sweden (2009)

Kettle, J., Lamminmäki, T., Gane, P.: A review of modified surfaces for high speed inkjet coating. Surf. Coat. Technol. 204(12–13), 2103–2109 (2010)CrossRef

10.

Desie, G., Deroover, G., De Voeght, F., Soucemarianadin, A.: Printing of dye and pigment-based aqueous inks onto porous substrates. J. Imaging Sci. Technol. 48(5), 389–397 (2004)

11.

Desie, G., Roost, C.V.: Validation of ink media interaction mechanisms for dye and pigment-based aqueous and solvent inks. J. Imaging Sci. Technol. 50(3), 294–303 (2006)CrossRef

12.

Lundberg, A., Örtegren, J., Alfthan, E., Ström, G.: Microscale droplet absorption into paper for inkjet printing. Nordic Pulp Paper Res. J. 26(1), 142–150 (2011)CrossRef

13.

Apel-Paz, M., Marmur, A.: Spreading of liquids on rough surfaces. Colloids Surf. A Physicochem. Eng. Aspects 146(1–3), 273–279 (1999)CrossRef

14.

Zhdanov, S.A., Starov, V.M., Sobolev, V.D., Velarde, M.G.: Spreading of aqueous SDS solutions over nitrocellulose membranes. J. Colloid. Interface Sci. 264(2), 481–489 (2003)CrossRef

15.

Starov, V.M., Zhdanov, S.A., Kosvintsev, S.R., Sobolev, V.D., Velarde, M.G.: Spreading of liquid drops over porous substrates. Adv. Colloid Interface Sci. 104(1–3), 123–158 (2003)CrossRef

16.

Kannangara, D., Zhang, H., Shen, W.: Liquid-paper interactions during liquid drop impact and recoil on paper surfaces. Colloids Surf. A Physicochem. Eng. Aspects 280(1–3), 203–215 (2006)CrossRef

17.

Clarke, A., Blake, T.D., Carruthers, K., Woodward, A.: Spreading and imbibition of liquid droplets on porous surfaces. Langmuir 18(8), 2980–2984 (2002)CrossRef

18.

Girard, F., Attané, P., Morin, V.: A new analytical model for impact and spreading of one drop: application to inkjet printing. TAPPI J. 5(12), 24–32 (2006)

19.

Talbot, E.L., Berson, A., Brown, P.S., Bain, C.D.: Evaporation of picolitre droplets on surfaces with a range of wettabilities and thermal conductivities. Phys. Rev. E 85(6), 1–7 (2012)CrossRef

20.

Decker, E.L., Frank, B., Suo, Y., Garoff, S.: Physics of contact angle measurement. Colloids Surf. A Physicochem. Eng. Aspects 156(1–3), 177–189 (1999)CrossRef

21.

Lam, C.N.C., Lu, J.J., Neumann, A.W.: Measuring contact angle. In: Holmberg, K. (ed.) Handbook of Applied Surface and Colloid Chemistry, vol. 2, pp. 251–280. Wiley, New York (2002)

22.

Neimo, L.: Chapter 7—internal sizing of paper. Published in cooperation with the Finnish Paper Engineers’ Association and TAPPI (1999)

23.

Nissi, M.V., Kuusipalo, J.: Chapter 3—wetting and adhesion in paper and paperboard converting. Published in cooperation with the Finnish Paper Engineers’ Association and TAPPI (1998)

24.

Suontausta, O.: Chapter 9—end-use properties of printing papers. Published in cooperation with the Finnish Paper Engineers’ Association and TAPPI (1999)

25.

Leskelä, M., Simula, S.: Chapter 9—transport phenomena. Published in cooperation with the Finnish Paper Engineers’ Association and TAPPI (1998)

26.

Ström, G.R., Borg, J., Svanholm, E.: Short-time water absorption by model coatings. In: TAPPI 10th Advanced Coating Fundamentals Symposium, Montreal, Canada, June 11–13, 2008, pp. 204–216 (2008)

27.

Taylor, M., Urquhart, A.J., Zelzer, M., Davies, M.C., Alexander, M.R.: Picoliter water contact angle measurement on polymers. Langmuir 23(13), 6875–6878 (2007)CrossRef

28.

Niskanen, K., Kajanto, I., Pakarinen, P.: Chapter 1–paper structure. Published in cooperation with the Finnish Paper Engineers’ Association and TAPPI (1998)

29.

Norman, B.: Chapter 6—web forming. Published in cooperation with the Finnish Paper Engineers’ Association and TAPPI (2000)

30.

Amaral, J.L., Sousa, A.P.M., Oliveira, N.J., Mendes, A.O., Sousa, S.C.L., Fiadeiro, P.T., Ramos, A.M.M.: Dinâmica da interacção tinta/papel na impressão inkjet. In: Simpósio 2011–Transferência de Conhecimento e Tecnologia, Covilhã, Portugal (2011)

31.

Kuzu, Y., Rodehorst, V.: Volumetric modeling using shape from silhouette. In: Fourth Turkish-German Joint Geodetic Days, Berlin, Germany, pp. 469–476 (2001)

32.

Sakamoto, S., Shoji, K., Iwase, H., Toyama, F.: Volume intersection with imprecise camera parameters. In: IS &T/SPIE–Electronic Imaging, Science and Technology, San Jose, California, USA, pp. 60560U.60561-60560U.60512 (2006)

33.

Shoji, K., Sakamoto, S., Iwase, H., Toyama, F., Miyamichi, J.: Run-based volume intersection for shape recovery of objects from their silhouettes. In: IS &T/SPIE–Electronic Imaging, Science and Technology, San Jose, California, USA, pp. 60560W.60561-60560W.60568 (2006)

34.

Mottier, P.: LEDs for Lighting Applications. Wiley, London (2009)

35.

Mulqueen, M., Huibers, P.D.T.: Measuring equilibrium surface tensions. In: Holmberg, K. (ed.) Handbook of Applied Surface and Colloid Chemistry, vol. 2, pp. 217–224. Wiley, New York (2002)

36.

Conrad, J.: An introduction to depth of field. In: Large Format Photography, pp. 1–9 (2006)

37.

Conrad, J.: Depth of field in depth. In: Large Format Photography, pp. 1–45 (2006)

38.

Gonzalez, R.C., Woods, R.E.: Digital Image Processing. Addison-Wesley Publishing Company, Reading (1992)

39.

Pratt, W.K.: Digital Image Processing. Wiley, New York (1991)MATH

40.

Thomsen, F.: Practical contact angle measurement. http://www.kruss.de. Accessed May 2008 (2008)

41.

Njobuenwu, D.O., Oboho, E.O., Gumus, R.H.: Determination of contact angle from contact area of liquid droplet spreading on solid substrate. Leonardo Electron. J. Pract. Technol. 6(10), 29–38 (2007)

Titel: Development of an optical system for analysis of the ink–paper interaction
verfasst von: António de Oliveira Mendes
Paulo Torrão Fiadeiro
Ana Maria Matos Ramos
Sónia Cristina Lopes de Sousa
Publikationsdatum: 01.11.2013
Verlag: Springer Berlin Heidelberg
Erschienen in: Machine Vision and Applications / Ausgabe 8/2013
Print ISSN: 0932-8092
Elektronische ISSN: 1432-1769
DOI: https://doi.org/10.1007/s00138-013-0496-y

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2013

Tracking-by-detection of multiple persons by a resample-move particle filter

Multi-view dense 3D modelling of untextured objects from a moving projector-cameras system

Detecting interaction above digital tabletops using a single depth camera

A machine vision system to estimate cotton fiber maturity from longitudinal view using a transfer learning approach

Efficient segmentation of leaves in semi-controlled conditions

Triangular traffic signs detection based on RSLD algorithm

Premium Partner