nach oben

Applied Composite Materials

Erschienen in:

29.12.2017

Insight into the Effects of Reinforcement Shape on Achieving Continuous Martensite Transformation in Phase Transforming Matrix Composites

verfasst von: Xudong Zhang, Junqiang Ren, Xiaofei Wang, Hongxiang Zong, Lishan Cui, Xiangdong Ding

Erschienen in: Applied Composite Materials | Ausgabe 6/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A continuous martensite transformation is indispensable for achieving large linear superelasticity and low modulus in phase transforming metal-based composites. However, determining how to accurately condition the residual martensite in a shape memory alloy matrix though the reinforcement shape to achieve continuous martensite transformation has been a challenge. Here, we take the finite element method to perform a comparative study of the effects of nanoinclusion shape on the interaction and martensite phase transformation in this new composite. Two typical samples are compared: one reinforced by metallic nanowires and the other by nanoparticles. We find that the residual martensite within the shape memory alloy matrix after a pretreatment can be tailored by the reinforcement shape. In particular, our results show that the shape memory alloy matrix can retain enough residual martensite phases to achieve continuous martensite transformation in the subsequent loading when the aspect ratio of nanoreinforcement is larger than 20. In contrast, the composites reinforced with spherical or low aspect ratio reinforcement show a typical nonlinear superelasticity as a result of a low stress transfer-induced discontinuous martensite transformation within the shape memory alloy matrix.

Vorheriger Artikel Effect of Spring-in Deviation on Fatigue Life of Composite Elevator Assembly

Nächster Artikel Failure Behavior and Strength of Composite I-Section Beam with Double Cutouts and Stiffener Reinforcement

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Hao, S., Cui, L., Jiang, D., Han, X., Ren, Y., Jiang, J., Liu, Y., Liu, Z., Mao, S., Wang, Y., Li, Y., Ren, X., Ding, X., Wang, S., Yu, C., Shi, X., Du, M., Yang, F., Zheng, Y., Zhang, Z., Li, X., Brown, D.E., Li, J.: A transforming metal nanocomposite with large elastic strain, low modulus, and high strength. Science. 339(6124), 1191–1194 (2013). https://doi.org/10.1126/science.1228602 CrossRef

Zhou, M.: Exceptional properties by design. Science. 339(6124), 1161–1162 (2013). https://doi.org/10.1126/science.1236378 CrossRef

Li, J., Shan, Z., Ma, E.: Elastic strain engineering for unprecedented materials properties. MRS Bull. 39(02), 108–117 (2014). https://doi.org/10.1557/mrs.2014.3 CrossRef

Chen, Y., Liu, Y., Sun, C., Yu, K.Y., Song, M., Wang, H., Zhang, X.: Microstructure and strengthening mechanisms in Cu/Fe multilayers. Acta Mater. 60(18), 6312–6321 (2012). https://doi.org/10.1016/j.actamat.2012.08.005 CrossRef

Thilly, L., Petegem, S.V., Renault, P.O., Lecouturier, F., Vidal, V., Schmitt, B., Swygenhoven, H.V.: A new criterion for elasto-plastic transition in nanomaterials: application to size and composite effects on Cu–Nb nanocomposite wires. Acta Mater. 57(11), 3157–3169 (2009). https://doi.org/10.1016/j.actamat.2009.03.021 CrossRef

Sun, Y., Sun, J., Liu, M., Chen, Q.: Mechanical strength of carbon nanotube–nickel nanocomposites. Nanotechnology. 18(50), 505704 (2007). https://doi.org/10.1088/0957-4484/18/50/505704 CrossRef

Thilly, L., Renault, P.O., Vidal, V., Lecouturier, F., Van Petegem, S., Stuhr, U., van Swygenhoven, H.: Plasticity of multiscale nanofilamentary Cu/Nb composite wires during in situ neutron diffraction: Codeformation and size effect. Appl. Phys. Lett. 88(19), 191906 (2006). https://doi.org/10.1063/1.2202720 CrossRef

Dzenis, Y.: Structural nanocomposites. Science. 319(5862), 419–420 (2008). https://doi.org/10.1126/science.1151434 CrossRef

Podsiadlo, P., Kaushik, A.K., Arruda, E.M., Waas, A.M., Shim, B.S., Xu, J., Nandivada, H., Pumplin, B.G., Lahann, J., Ramamoorthy, A., Kotov, N.A.: Ultrastrong and stiff layered polymer nanocomposites. Science. 318(5847), 80–83 (2007). https://doi.org/10.1126/science.1143176 CrossRef

10.

Coleman, J.N., Khan, U., Gun’ko, Y.K.: Mechanical reinforcement of polymers using carbon nanotubes. Adv. Mater. 18(6), 689–706 (2006). https://doi.org/10.1002/adma.200501851 CrossRef

11.

Otsuka, K., Ren, X.: Physical metallurgy of Ti–Ni-based shape memory alloys. Prog. Mater. Sci. 50(5), 511–678 (2005). https://doi.org/10.1016/j.pmatsci.2004.10.001 CrossRef

12.

Otsuka, K., Wayman, C.M.: Shape Memory Materials. Cambridge University Press, Cambridge (1998)

13.

Hao, S., Cui, L., Guo, F., Liu, Y., Shi, X., Jiang, D., Brown, D.E., Ren, Y.: Achieving large linear elasticity and high strength in bulk nanocompsite via synergistic effect. Sci. Rep. 5(1), 8892 (2015). https://doi.org/10.1038/srep08892 CrossRef

14.

Yang, F., Ni, D., Hao, S., Li, S., Ma, Z., Liu, Y., Feng, C., Cui, L.: Microstructure and phase stress partition of Mo fiber reinforced CuZnAl composite. Mater. Sci. Eng. A. 628, 419–422 (2015). https://doi.org/10.1016/j.msea.2015.01.068 CrossRef

15.

Liu, Z., Cui, L., Liu, Y., Jiang, D., Jiang, J., Shi, X., Shao, Y., Zheng, Y.: Influence of internal stress coupling on the deformation behavior of NiTi-Nb nanowire composites. Scripta Mater. 77, 75–78 (2014). https://doi.org/10.1016/j.scriptamat.2014.01.027 CrossRef

16.

Dong, Y., Cong, D., Nie, Z., He, Z., Li, L., Wang, Z., et al.: Stress transfer during different deformation stages in a nano-precipitate-strengthened Ni-Ti shape memory alloy. Appl. Phys. Lett. 107(20), 201901 (2015). https://doi.org/10.1063/1.4935691 CrossRef

17.

Hao, S.J., Jiang, D.Q., Cui, L.S., Wang, Y.D., Shi, X.B., Nie, Z.H., Brown, D.E., Ren, Y.: Phase-stress partition and stress-induced martensitic transformation in NbTi/NiTi nanocomposite. Appl. Phys. Lett. 99(8), 084103 (2011). https://doi.org/10.1063/1.3629768 CrossRef

18.

Yu, C., Liu, Z., Liu, Y., Shao, Y., Ren, Y., Cui, L.: Load transfer in phase transforming matrix–nanowire composite revealing the significant load carrying capacity of the nanowires. Mater. Des. 89, 721–726 (2016). https://doi.org/10.1016/j.matdes.2015.10.029 CrossRef

19.

Li, Y., RAMESH, K.T.: Influence of particle volume fraction, shape, and aspect ratio on the behavior of particle-reinforced metal–matrix composites at high rates of strain. Acta Mater. 46, 5633-5646 (1998). https://doi.org/10.1016/S1359-6454(98)00250-X CrossRef

20.

Xin, L., Yang, W., Zhao, Q., Dong, R., Liang, X., Xiu, Z., Hussain, M., Wu, G.: Effect of extrusion treatment on the microstructure and mechanical behavior of SiC nanowires reinforced al matrix composites. Mater. Sci. Eng. A. 682, 38–44 (2017). https://doi.org/10.1016/j.msea.2016.11.042 CrossRef

21.

Hao, S., Cui, L., Wang, H., Jiang, D., Liu, Y., Yan, J., Ren, Y., Han, X., Brown, D.E., Li, J.: Retaining large and adjustable elastic strains of kilogram-scale Nb nanowires. ACS Appl. Mater. Interfaces. 8(5), 2917–2922 (2016). https://doi.org/10.1021/acsami.5b10840 CrossRef

22.

Segurado, J., Llorca, J.: A numerical approximation to the elastic properties of sphere-reinforced composites. J. Mech. Phys. Solids. 50(10), 2107–2121 (2002). https://doi.org/10.1016/S0022-5096(02)00021-2 CrossRef

23.

Tian, W., Qi, L., Zhou, J., Guan, J.: Effects of the fiber orientation and fiber aspect ratio on the tensile strength of C_sf /Mg composites. Comput. Mater. Sci. 89, 6–11 (2014). https://doi.org/10.1016/j.commatsci.2014.03.004 CrossRef

24.

Mirkhalaf, S.M., Andrade Pires, F.M., Simoes, R.: Determination of the size of the representative volume element (RVE) for the simulation of heterogeneous polymers at finite strains. Finite Elem. Anal. Des. 119, 30–44 (2016). https://doi.org/10.1016/j.finel.2016.05.004 CrossRef

25.

Zare, Y., YopRhee, K., Hui, D.: Influences of nanoparticles aggregation/agglomeration on the interfacial/interphase and tensile properties of nanocomposites. Compos. Pt. B-Eng. 122, 41–46 (2017). https://doi.org/10.1016/j.compositesb.2017.04.008 CrossRef

26.

Xia, Z., Zhang, Y., Ellyin, F.: A unified periodical boundary conditions for representative volume elements of composites and applications. Int. J. Solids Struct. 40(8), 1907–1921 (2003). https://doi.org/10.1016/S0020-7683(03)00024-6 CrossRef

27.

Xia, Z., Zhou, C., Yong, Q., Wang, X.: On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites. Int. J. Solids Struct. 43(2), 266–278 (2006). https://doi.org/10.1016/j.ijsolstr.2005.03.055 CrossRef

28.

Auricchio, F., Taylor, R.L.: Shape-memory alloys: modelling and numerical simulations of the finite-strain superelastic behavior. Comput. Methods Appl. Mech. Eng. 143(1-2), 175–194 (1997). https://doi.org/10.1016/S0045-7825(96)01147-4 CrossRef

29.

Auricchio, F., Taylor, R.L., Lubliner, J.: Shape-memory alloys: macromodelling and numerical simulations of the superelastic behavior. Comput. Methods Appl. Mech. Eng. 146(3-4), 281–312 (1997). https://doi.org/10.1016/S0045-7825(96)01232-7 CrossRef

30.

Gong, X., Pelton, A.: ABAQUS Analysis on Nitinol Medical Applications. SMST Society, California (2002)

31.

Lei, H., Wang, Z., Zhou, B., Tong, L., Wang, X.: Simulation and analysis of shape memory alloy fiber reinforced composite based on cohesive zone model. Mater. Des. 40, 138–147 (2012). https://doi.org/10.1016/j.matdes.2012.03.037 CrossRef

32.

Lei, H., Wang, Z., Tong, L., Zhou, B., Fu, J.: Experimental and numerical investigation on the macroscopic mechanical behavior of shape memory alloy hybrid composite with weak interface. Compos. Struct. 101, 301–312 (2013). https://doi.org/10.1016/j.compstruct.2013.02.006 CrossRef

33.

Cohen, D.E., Bevk, J.: Enhancement of the Young’s modulus in the ultrafine Cu-Nb filamentary composites. Appl. Phys. Lett. 39(8), 595–597 (1981). https://doi.org/10.1063/1.92842 CrossRef

34.

Nemat-Nasser, S., Guo, W.: Superelastic and cyclic response of NiTi SMA at various strain rates and temperatures. Mech. Mater. 38(5-6), 463–474 (2006). https://doi.org/10.1016/j.mechmat.2005.07.004 CrossRef

35.

Machado, G., Louche, H., Alonso, T., Favier, D.: Superelastic cellular NiTi tube-based materials: fabrication, experiments and modeling. Mater. Des. 65, 212–220 (2015). https://doi.org/10.1016/j.matdes.2014.09.007 CrossRef

36.

Jiang, J., Jiang, D., Hao, S., Yu, C., Zhang, J., Ren, Y., Lu, D., Xie, S., Cui, L.: A nano lamella NbTi–NiTi composite with high strength. Mater. Sci. Eng. A. 633, 121–124 (2015). https://doi.org/10.1016/j.msea.2015.03.010 CrossRef

37.

Jia, Z., Ma, H., Cheng, L., Lau, K., Hui, D., Yuan, G.: Stress transfer properties of carbon nanotube reinforced polymer composites at low temperature environment. Compos. Pt. B-Eng. 106, 356–365 (2016). https://doi.org/10.1016/j.compositesb.2016.09.006 CrossRef

38.

Mohonee, V.K., Goh, K.L.: Effects of fibre-fibre interaction on stress uptake in discontinuous fibre reinforced composites. Compos. Pt. B-Eng. 86, 221–228 (2016). https://doi.org/10.1016/j.compositesb.2015.10.015 CrossRef

Titel: Insight into the Effects of Reinforcement Shape on Achieving Continuous Martensite Transformation in Phase Transforming Matrix Composites
verfasst von: Xudong Zhang
Junqiang Ren
Xiaofei Wang
Hongxiang Zong
Lishan Cui
Xiangdong Ding
Publikationsdatum: 29.12.2017
Verlag: Springer Netherlands
Erschienen in: Applied Composite Materials / Ausgabe 6/2018
Print ISSN: 0929-189X
Elektronische ISSN: 1573-4897
DOI: https://doi.org/10.1007/s10443-017-9671-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2018

Design and Optimization of Composite Automotive Hatchback Using Integrated Material-Structure-Process-Performance Method

Study on Forced Torsional Vibration of CFRP Drive-Line System with Internal Damping

Hybrid Composite Using Natural Filler and Multi-Walled Carbon Nanotubes (MWCNTs)

Numerical Investigation of Delamination in Drilling of Carbon Fiber Reinforced Polymer Composites

The Effects of Triggering Mechanisms on the Energy Absorption Capability of Circular Jute/Epoxy Composite Tubes under Quasi-Static Axial Loading

Detection and Evaluation of Pre-Preg Gaps and Overlaps in Glare Laminates

Premium Partner

Marktübersichten