The influence of zinc oxide–cerium oxide nanoparticles on the structural characteristics and electrical properties of polyvinyl alcohol films

With the objective to investigate the influence of zinc oxide–cerium oxide (ZnO–Ce₂O₃) nanoparticles on the electrical properties of polyvinyl alcohol (PVA), PVA/ZnO–Ce₂O₃ nanocomposite films were prepared by solution intercalation method with different weight percentage viz., 0.5, 1.0, and 2.0 wt% of ZnO–Ce₂O₃ nanoparticles. The fabricated nanocomposites were characterized by Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The effect of ZnO–Ce₂O₃ nanoparticles on the dielectric constant (ε′), dielectric loss (ε″), electric modulus (M′ and M″), ac conductivity (σ _ac), and dielectric loss tangent (tan δ) over a range of frequencies at room temperature of PVA nanocomposites have been studied. FT-IR, XRD, and DSC analysis indicates the nature of ZnO–Ce₂O₃ nanoparticles interaction with the PVA matrix. The morphological behavior of the nanocomposites has been performed using scanning electron microscopy (SEM). The dielectric behaviors such as dielectric constant (ε′) and dielectric loss (ε″) increases with increase in nanoparticle concentration, but decreases with increase in frequency. But, the electric modulus (M′) increases with increase in frequency. Dielectric loss tangent (tan δ) decreases with increase in filler content at lower frequency, but at higher frequencies the tan δ increases with increase in nanoparticles content. AC conductivity (σ _ac) of PVA/ZnO–Ce₂O₃ nanocomposites increases with increasing frequency following the universal dielectric response law.