Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Science
Erschienen in: Journal of Materials Science 7/2015

01.04.2015 | Review

On the correlation between microstructural evolution and ultrasonic properties: a review

verfasst von: Meysam Toozandehjani, Khamirul Amin Matori, Farhad Ostovan, Faizal Mustapha, Nur Ismarrubie Zahari, Arshin Oskoueian

Erschienen in: Journal of Materials Science | Ausgabe 7/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The characterization and optimization of the microstructures of materials pertaining to material properties is a primitive necessity to ensure the performance and service life of the materials and components. In the demand of new characterization and evaluation techniques, nondestructive ultrasonic techniques have shown a good potential to characterize the microstructures and mechanical properties of a wide variety of materials. Measurements of ultrasonic parameters such as velocity and attenuation can provide information on the structural and microstructural variations of those materials that have undergone the heat-treatment procedure. In the current review, the correlation of ultrasonic parameters with microstructural features of ferrous and nonferrous metals such as steels, aluminum, and superalloys is investigated. It is proven that ultrasonic parameters are closely correlated to the microstructural evolutions which frequently occur during the heat-treatment procedures in practical situations. To conclude, the ultrasonic measurements contribute to a feasible and accurate characterization of the materials and evaluation of their microstructures and mechanical properties in a straightforward, reliable, and fast, nondestructive manner for practical applications.
Nächster Artikel Establishing the fracture properties of delaminating multilayered decorative coatings on wood and their changes after consolidation with polymer formulations

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Gür CH (2013) Characterization of steel microstructures by magnetic barkhausen noise technique. Nondestruct Test Mater Struc 6:499–504
2.
Raj B (1996) A perspective on materials characterization for technology advancement and industrial growth: emphasis on non-destructive evaluation. Bull Mater Sci 19:839–855
3.
Kaplan M, Gür CH, Erdogan M (2007) Characterization of dual-phase steels using magnetic barkhausen noise technique. J Nondestruct Eval 26:79–87
4.
Singh R (2012) Heat treatment of steels. In: Singh RR (ed) Applied welding engineering: processes, codes, and standards. Elsevier Ltd, Amsterdam, pp 95–108
5.
Gestwa W, Przylecka M, MacKenzie DM, Pye D, Totten GE (2004) Heat treatment. In: Gale WF, Totemeier TC (eds) Smithells metals reference book, 8th edn. Elsevier Ltd, Amsterdam, pp 1–83
6.
Raj B, Jayakumar T (1997) NDE methodologies for characterization of defects, stresses and microstructures in pressure vessels and pipe. Int J Press Vessel Piping 73:133–146
7.
Freitas V, Albuquerque V, Silva E, Silva A, Tavares JMRS (2010) Nondestructive characterization of microstructures and determination of elastic properties in plain carbon steel using ultrasonic measurements. Mater Sci Eng A 527:4431–4437
8.
Nanekar PP, Shah BK (2003) Characterization of material properties by ultrasonic. BARC Newsl 249:25–38
9.
García-Martín J, Gómez-Gil J, Vázquez-Sánchez E (2011) Non-destructive techniques based on eddy current testing. Sensors 11:2525–2565
10.
Manjula K, Vijayarekh K, Venkatraman B, Karthik D (2012) Ultrasonic time of flight diffraction technique for weld defects: a review. J Appl Sci Eng Tech 4:5525–5533
11.
Normando PG, Moura EP, Souza JA, Tavares SM, Padovese LR (2010) Ultrasound, eddy current and magnetic Barkhausen noise as tools for sigma phase detection on a UNS S31803 duplex stainless. Mater Sci Eng A 527:2886–2891
12.
Viswanath A, Rao BPC, Mahadevan S, Parameswaran P, Jayakumara T, Raj B (2011) Nondestructive assessment of tensile properties of cold worked AISI type 304 stainless steel using nonlinear ultrasonic technique. J Mater Process Tech 211:538–544
13.
Muthmari S, Singh A (2011) Review of various ultrasonic techniques employed in modern industries. Int J Eng Sci Tech 3:3078–3085
14.
Zergoug M, Kamel G, Boucherou N (2008) Mechanical stress analysis by eddy current method. J Am Sci 4:1–6
15.
Konoplyuk S (2010) Estimation of pearlite fraction in ductile cast irons by eddy current method. NDT E Int 43:360–364
16.
Rosen M, Horowitz E, Swartzendruber L, Fick S, Mehrabian R (1982) The aging process in aluminum alloy 2024 studied by means of eddy currents. Mater Sci Eng 53:191–198
17.
Sasi B, Rao BPC, Jayakumar T, Raj B (2010) Characterisation of solution annealed VT-4 titanium alloy using eddy current based electrical resistivity measurements. Trans Indian Inst Met 63:773–777
18.
Auld BA, Moulder JC (1999) Review of advances in quantitative Eddy Current nondestructive evaluation. J Nondestruct Eval 18:3–35
19.
Santa-aho S, Vippola M, Sorsa A, Leiviskä K, Lindgren M, Lepistö T (2012) Utilization of barkhausen noise magnetizing sweeps for case-depth detection from hardened steel. NDT E Int 52:95–102
20.
Tomita Y, Hashimoto K, Osawa N (1996) Nondestructive estimation of fatigue damage for steel by Barkhausen noise analysis. NDT E Int 29:275–280
21.
Rao BPC, Jaykumar T, Raj B, Arnold W (2001) Nondestructive characterization of martensite in AISI type 304 stainless steel using Squid and MBN methods. J Nondestruct Eval 21:38–43
22.
Franco FA, González MFR, Campos MF, Padovese LR (2013) Relation between magnetic barkhausen noise and hardness for jominy quench tests in SAE 4140 and 6150 steels. J Nondestruct Eval 32:93–103
23.
Zhu Y, Tian GY, Lu RS, Zhang H (2011) A review of optical NDT technologies. Sensors 11:7773–7798
24.
Awal MA (1995) Low frequency acoustic microscopy for material characterization. PhD Dissertation, University of Arizona
25.
Luangvilai K (2007) Attenuation of ultrasonic lamb waves with applications to material characterization and condition Monitoring. PhD Dissertation, Georgia institute of technology
26.
Vogt TK (2002) Determination of material properties using guided waves. PhD Dissertation, Imperical college of science, technology and medicine
27.
Pandey DK, Pandey S (2010) Ultrasonics: A Technique of Material Characterization. In: Dissanayake DW (ed), Acoustic waves. Sciyo, Croatia, pp 397–430
28.
Ewert U, Jaenisch GR, Osterloh K, Zscherpel U (2011) Performance control: nondestructive testing and reliability evaluation. In: Czichos H, Saito T, Smith (eds) Springer handbook of metrology and testing, 2nd edn. Springer, Berlin, pp 887–972
29.
Hendee WR, Ritenour ER (2002) Medical imaging physics, 4th edn. Wiley-Liss Inc, London
30.
Hirao M, Ogi H (2003) EMATs for science and industry noncontacting ultrasonic measurements. Kluwer Academic Publishers, Dordrecht
31.
Badidi Bouda A, Lebaili S, Benchaala A (2003) Grain size influence on ultrasonic velocities and attenuation. NDT E Int 36:1–5
32.
Krautkramer J, Krautkramer H (1983) Ultrasonic testing materials, 2nd edn. Springer, New York
33.
Hellier CJ (2003) Handbook of nondestructive evaluation. Mc Graw-Hill, New York
34.
Han YK, Thompson RB (1997) Ultrasonic backscattering in duplex microstructures: theory and application to titanium alloys. Metall Mater Trans A 28:91–104
35.
Lobkis OI, Yang L, Li J, Rokhlin SI (2012) Ultrasonic backscattering in polycrystals with elongated single phase and duplex microstructures. Ultrasonics 52:694–705
36.
Mora EP, Normando PG, Gonçalvs LL, Kruger SE (2012) Characterization of cast iron microstructure through fluctuation and fractal analyses of ultrasonic backscattered signals combined with classification techniques. J Nondestruc Eval 31:90–98
37.
Kruger SE, Rebello JMA, De Camargo PC (1999) Hydrogen damage detection by ultrasonic spectral analysis. NDT E Int 32:275–281
38.
Cong S, Gang T (2012) Ultrasonic thickness measurement for aluminum alloy irregular surface parts based on spectral analysis. J Trans Nonferr Metal Soc 22:323–328
39.
Kumar A, Jaykumar T, Palanichamy P, Raj B (1999) Influence of grain size on ultrasonic spectral parameters in AISI type 316 stainless steel. Scr Mater 40:333–340
40.
Leviston D, Bridge B (1988) Evaluation of the subsurface microstructure of quenched and tempered carbon steel by ultrasonic backscatter. NDT Int 21:17–25
41.
Palanichamy P, Joseph A, Jayakumar T, Raj B (1995) Ultrasonic velocity measurements for estimation of grain size in austenitic stainless steel. NDT E Int 28:179–185
42.
43.
Papadakis EP (1972) Absolute accuracy of the pulse-echo overlap method and pulse-superposition method for ultrasonic velocity. J Acoust Soc Am 52:843–846
44.
Papadakis EP (1967) Ultrasonic phase velocity by pulse-echo overlap method incorporating diffraction phase corrections. J Acoust Soc Am 42:1045–1051
45.
Edmonds PD, Dunn F (1981) Physical description of ultrasonic fields. In: Edmonds PD (ed) Methods of experimental physics: ultrasonics. Academic Press, New York
46.
Herzfeld KF, Litovitz TA (1959) Absorption and dispersion of ultrasonic waves. Academic Press, New York
47.
Papadakis EP (1968) Ultrasonic attenuation caused by scattering in polycrystalline media. In: Mason W (ed) Physical Acoustics, IVB. Academic Press, New York, pp 269–328
48.
Papadakis EP (1965) Revised grain-scattering formulas and tables. J Acoust Soc Am 37:703–710
49.
Mason WP, McSkimmin HJ (1947) Attenuation and scattering of high frequency sound waves in metals and glasses. J Acous Soc Am 19:464–473
50.
Mason WP, McSkimmin HJ (1948) Energy losses of sound waves in metals due to scattering and diffusion. J Appl Phys 19:940–946
51.
Stanke FE, Kino GS (1984) A unified theory for elastic wave propagation in polycrystalline materials. J Acous Soc Am 75:665–681
52.
Weaver RL (1990) Diffusivity of ultrasound in polycrystals. J Mech Phys Solids 38:55–86
53.
Mason WP (1958) Physical acoustics and properties of solids. Van Nostrand, Princeton, NJ
54.
Truell R, Elbaum C, Chick BB (1969) Ultrasonic methods in solid state physics. Academic Press, New York
55.
Papadakis EP (1990) The measurement of ultrasonic velocity. In: Thurston RN, Pierce AD (eds) Physical acoustics, vol XIX. Academic Press, Boston, pp 81–106
56.
Papadakis EP (1990) The measurement of ultrasonic velocity. In: Thurston RN, Pierce AD (eds) Physical acoustics, vol XIX. Academic Press, Boston, pp 107–155
57.
Papadakis EP (1976) Ultrasonic velocity and attenuation: Measurement methods and scientific and industrial applications. In: Mason WP, Thurston RN (eds) Physical acoustics: principles and methods, vol XII. Academic Press, New York, pp 277–374
58.
Papadakis EP (1981) Physical acoustics: principles and methods. Academic Press, New York, pp 269–370
59.
Papadakis EP (1964) Ultrasonic attenuation and velocity in three transformation products in steel. J Acoust Soc Am 35:1474–1481
60.
Papadakis EP (1970) Ultrasonic attenuation and velocity in AISI/SAE 52100 steel quenched from various temperatures. Metall Trans 1:1053–1057
61.
Kidd TH, Zhuang S, Ravichandran G (2007) An in situ ultrasonic technique for simultaneous measurement of longitudinal and shear wave speeds in solids. Exp Mech 47:753–759
62.
Kim SA, Johnson LW (2007) Elastic constants and internal friction of martensitic steel, ferritic-pearlitic steel, and α-iron. Mater Sci Eng A 452–453:633–639
63.
Kumar A, Jaykumar T, Raj B (2006) Influence of precipitation of intermetallics on Young’s modulus in nickel and zirconium base alloy. Philos Mag Let 86:579–587
64.
Dubois M, Militzer M, Moreau A, Bussière JF (2000) A new technique for the quantitative real-time monitoring of austenite grain growth in steel. Scr Mater 42:867–874
65.
Lévesque D, Kruger SE, Lamouche G, Kolarik R, Jeskey G, Choquet M, Monchalin JP (2006) Thickness and grain size monitoring in seamless tube making process using laser-ultrasonics. In: Proceeding of advances in signal processing for nondestructive evaluation of materials, pp 51–56
66.
Botvina LR, Fradkin LJ, Bridge B (2000) A new method for assessing the mean grain size of polycrystalline materials using ultrasonic NDE. J Mater Sci 35:4673–4683. doi:10.​1023/​A:​1004890604013
67.
Badidi Bouda A, Benchaala A, Alem K (2000) Ultrasonic characterization of materials hardness. Ultrasonics 38:224–227
68.
Korde N, Kundu T (2013) Material hardness and aging measurement using guided ultrasonic waves. Ultrasonics 53:506–510
69.
Aghaie-Khafri M, Honarvar F, Zanganeh S (2012) Characterization of grain size and yield strength in AISI 301 stainless steel using ultrasonic attenuation measurements. J Nondestruct Eval 31:191–196
70.
Kwon SI, Hong ST, Choo WY (2000) Ultrasonic nondestructive evaluation of microstructure and strength of carbon steels. J Mater Sci let 19:1453–1456
71.
Smith RL (1983) Ultrasonic attenuation, microstructure and ductile to brittle transition temperature in Fe–C alloys. J Mater Eval 41:219–222
72.
Vary A (1998) Concepts for interrelating ultrasonic attenuation, microstructure and fracture toughness in polycrystalline solids. J Mater Eval 46:642–649
73.
Generazio ER (1998) Ultrasonic attenuation measurements to determine onset, degree and completion of recrystallization. J Mater Eval 46:1198–1203
74.
Vasudevan M, Palanichami P (2002) Characterization of microstructural changes during annealing of cold worked austenitic stainless steel using ultrasonic velocity measurements and correlation with mechanical Properties. J Mater Eng Perform 11:169–179
75.
Baqeri R, Honarvar F, Mehdizad R (2012) Case depth profile measurement of hardened components using ultrasonic backscattering method. Proceeding of 18th world conference on nondestructive testing. Durban, South Africa, pp 16–20
76.
Weston-Bartholomew W (1979) Use of ultrasonic goniometer to measure depth of case hardening. Int Adv Nondestruct Test 6:111–123
77.
Meyendorf GH, Rösner H, Kram V, Sathish S (2002) Thermo-acoustic fatigue characterization. Ultrasonics 40:427–434
78.
Cantrell HJ, Yost TW (2001) Nonlinear ultrasonic characterization of fatigue microstructures. Int J Fatigue 23:487–490
79.
Nagy BP (1998) Fatigue damage assessment by nonlinear materials characterization. Ultrasonics 36:375–381
80.
Ohtani T, Nishiyama K, Yoshikawa S, Ogi H, Hirao M (2006) Ultrasonic attenuation and microstructural evolution throughout tension–compression fatigue of a low-carbon steel. Mater Sci Eng A 442:466–470
81.
Jaykumar T, Mukhopadhyay CK (2010) Non-destructive evaluation techniques for assessment of creep and fatigue damage in materials and components. Trans Indian Inst Met 63:301–311
82.
Yassen Y, Ismail MP, Jemain AA, Daud AR (2011) Reliability of ultrasonic measurement of thickness loss caused by corrosion. Insight Nondestruct Test Cond Monitor 53:658–663
83.
Birring AS, Bartlett ML, Kawano K (1998) Ultrasonic detection of hydrogen attack in steels. Corrosion 45:259–263
84.
Javadi Y, Afzali O, Raeisi HM, Najafabadi AM (2013) Nondestructive evaluation of welding residual stresses in dissimilar welded pipes. J Nondestruct Eval 32:177–187
85.
Nikitina NY, Ostrovsky LA (1998) An ultrasonic method for measuring stresses in engineering materials. Ultrasonics 35:605–610
86.
Roy AK, Bandyopadhyay S, Suresh SB, Wells D (2006) Comparison of residual stress in martensitic alloys by nondestructive techniques. Mater Sci Eng A 419:372–380
87.
88.
Leslie WC, Hornbogen E (1996) Physical metallurgy of steels. In: Cahn RW, Haasent P (eds) Physical metallurgy, 4th edn. Elsevier Science BV, NY
89.
Kruger SE, Damm BE (2006) Monitoring austenite decomposition by ultrasonic velocity. J Mater Sci Eng A 425:238–243
90.
Scruby CB, Moss BC (1993) Non-contact ultrasonic measurements on steel at elevated temperatures. NDT E Int 26:177–188
91.
Dubois M, Moreau A, Bussière JF (2001) Ultrasonic velocity measurements during phase transformations in steels using laser ultrasonics. J Appl Phys 89:6487–6495
92.
Dubois M, Moreau A, Militzer M, Bussière JF (1998) Laser ultrasonic monitoring of phase transformation in steels. Scripta Mater 39:735–741
93.
Lamouche G, Bolognini S, Kruger SE (2004) Influence of steel heat treatment on ultrasonic absorption measured by laser ultrasonic. Mater Sci Eng A 370:401–406
94.
Kruger SE, Bolognini S, Lamouche G (2003) Laser ultrasonics monitoring of LC steel absorption during annealing. In: Proceedings of the 11th international symposium on non-destructive characterization of materials, Germany, pp 33–38
95.
Prasad R, Kumar S (1991) An investigation into the ultrasonic behaviour of cast and heat-treated structures in steel. Br J Nondestruct Test 33:506–508
96.
Murav’ev VV (1989) Interrelationship of the velocity of an ultrasonic wave in steels and their heat cycles. Soviet J NDT 25:135–137
97.
Pandey JC (2011) Study of recrystallization in interstitial free (IF) steel by ultrasonic techniques. Mater Manufact Process 26:147–153
98.
Gür HC, Tuncer OB (2005) Characterization of microstructural phases of steels by sound velocity measurement. Mater Charact 55:160–166
99.
Gür HC, Çam I (2007) Comparison of magnetic Barkhausen noise and ultrasonic velocity measurements for microstructure evaluation of SAE 1040 and SAE 4140 steels. Mater Charact 58:447–454
100.
Grayali N, Shyne JC (1985) Effect of microstructure and prior austenite grain size on acoustic velocity and attenuation in steel, review of progress in NDE. Plenum Press, New York, pp 927–936
101.
Albuquerque VHC, Melo TAA, De Oliveira DF, Gomes RM, Tavares JMRS (2010) Evaluation of grain refiners influence on the mechanical properties in a CuAlBe shape memory alloy by ultrasonic and mechanical tensile testing. Mater Des 31:3275–3281
102.
Gür CH, Keleş Y (2003) Ultrasonic characterization of hot-rolled and heat-treated plain carbon steels. Insight Br J NDT 45:615–620
103.
Hirsekorn S (1982) The scattering of ultrasonic waves by polycrystals. J Acoust Soc Am 72:1021–1031
104.
Hirsekorn S (1983) The scattering of ultrasonic waves by polycrystals. II. Shear waves. J Acoust Soc Am 73:1160–1163
105.
Vasudevan M, Palanichami P, Venkadesan S (1994) A novel technique for characterizing annealing behavior. Scr Metall Mater 30:1479–1483
106.
Prasad R, Kumar S (1994) Study of the influence of deformation and thermal treatment on the ultrasonic behavior of steel. J Mater Process Tech 42:51–59
107.
Kumar A, Laha K, Jaykumar T, Rao KBS, Raj B (2002) Comprehensive microstructural characterization in modified 9Cr-1Mo ferritic steel by ultrasonic measurements. Metall Mater Trans A 33:1617–1626
108.
Kumar A, Choudhary BK, Laha K, Jayakumar T, Rao KBS, Raj B (2003) Characterization of microstructure in 9% chromium ferritic steels using ultrasonic measurements. Trans Indian Inst Met 56:483–497
109.
Kumar A, Choudharby K, Jaykumar T, Rao KBS, Raj B (2000) Influence of thermal ageing and creep on ultrasonic velocity in 9Cr-1Mo ferritic steel. Trans Indian Inst Met 53:341–345
110.
Mc. Intrie P (1991) Non-destructive testing handbook: ultrasonic testing. American Society for Non-Destructive Testing, USA
111.
Vary A (1980) Ultrasonic measurement of material properties. In: Sharpe RS (ed) Research techniques in non-destructive testing. Academic Press, New York, pp 159–204
112.
Papadakis EP (1984) Physical acoustics and microstructure of iron alloys. Inter Met Rev 29:1–24
113.
114.
Klimman R, Webster GR, Marsh FJ, Stepherson ET (1980) Ultrasonic prediction of grain size, strength, and toughness in plain carbon steel. Mat Eval 38:26–32
115.
Matos JMO, de Moura EP, Krüger SE, Rebello JMA (2004) Rescaled range analysis and detrended fluctuation analysis study of cast irons ultrasonic backscattered signals. Chaos, Solitons Fractals 19:55–60
116.
Ramuhalli P, Good MS, Diaz AA, Anderson MT, Watson BE, Peters TJ, Dixit M, Bond LJ (2009) Ultrasonic characterization of cast austenitic stainless steel microstructure: discrimination between equiaxed and columnar-grain material—an interim study, Technical reported of the U.S. Nuclear Regulatory
117.
Anderson MT, Bond LJ, Diaz AA, Good MS, Harris RV, Mathews R, Ramuhalli P, Roberts KC (2010) In-situ characterization of cast stainless steel microstructures. In: Proceedings of the 8th international conference on NDE in relation to structural integrity for nuclear and pressurised components, Germany, pp 1036–1045
118.
Hsu CH, Teng HY, Chen YJ (2004) Relationship between ultrasonic characteristics and mechanical properties of tempered martensitic stainless steel. J Mater Eng Perform 13:593–599
119.
Vijayalakshmi K, Muthupandi V, Jayachitra R (2011) Influence of heat treatment on the microstructure, ultrasonic attenuation and hardness of SAF 2205 duplex stainless steel. Mater Sci Eng A 529:447–451
120.
Jayachitra R, Muthupandi V, Vijayalakshmi K (2012) Characterization of duplex stainless steel heat-treated at 1300 °C. Int J Sci Res Public 2:1–6
121.
Kumar A, Jayakumar T, Raj B, Ray KK (2003) Correlation between ultrasonic shear wave velocity and Poisson’s ratio for isotropic solid materials. Acta Mater 51:2417–2426
122.
Ringer SP, Hono K (2000) Microstructural evolution and age hardening in aluminium alloys: atom probe field-ion microscopy and transmission electron microscopy studies. Mater Charact 44:101–131
123.
Chakrabarti DJ, Laughlin DE (2004) Phase relations and precipitation in Al–Mg–Si alloys with Cu additions. Prog Mater Sci 49:389–410
124.
Polmear IJ (2005) Physical metallurgy of aluminium alloys, 4th edn. Elsevier Ltd, Amsterdam
125.
Gefen Y, Rosen M, Rosen A (1971) Aging phenomena in Duraluminum 2024 studied by resistometry and hardness. Mater Sci Eng 8:181–188
126.
Tariq F, Naz N, Baloch R, Faisal A (2012) Characterization of material properties of 2xxx series Al-alloys by nondestructive testing techniques. J Nondestruct Eval 31:17–33
127.
Gefen Y, Rosen M, Rosen A (1971) Behaviour of ultrasonic attenuation during aging of Duraluminum 2024. Mater Sci Eng 8:246–247
128.
Muthu Kumaran S (2011) Evaluation of precipitation reaction in 2024 Al–Cu alloy through ultrasonic parameter. Mater Sci Eng A 528:4152–4158
129.
Muthu Kumaran S, Priyadharsini N, Rajendran V, Jayakumar T, Palanichamy P, Shankar P, Raj B (2006) In situ high temperature ultrasonic evaluation for on-line characterization of fine scale precipitation reactions in 8090 Al–Li alloy. Mater Sci Eng A 435–436:29–39
130.
Rajendran V, Muthu Kumaran S, Jayakumar T, Palanichamy P, Raj B (2005) Ultrasonic studies for microstructural characterization of AA8090 aluminium–lithium alloy. Mater Eval 63:837–842
131.
Rosen M, Ives L, Ridder S, Biancaniello F, Mehrabian R (1985) Correlation between ultrasonic and hardness measurement in aged aluminum alloy 2024. Mater Sci Eng 74:1–10
132.
Toozandehjani M, Mustapha F, Ismarrubie NZ, Ariffin MKA, Matori KA, Ostovan F, Lim WF (2014) Characterization of aging behavior of AA6061 aluminum alloy through destructive and ultrasonic non-destructive testing techniques. Trans Indian Inst Met. doi:10.​1007/​s12666-014-0486-4
133.
Rosen M, Horowitz E, Fick S, Reno RC, Mehrabian R (1982) An investigation on the precipitation hardening process in aluminum alloy 2219 by means of sound wave velocity and ultrasonic attenuation. Mater Sci Eng 53:163–177
134.
Murav’ev VV (1989) Effects of heat treatment on the speed of ultrasound in aluminum alloys. Soviet J Nondestruct Test 25:832–839
135.
Gür CH, Yildiz I (2004) Non-destructive investigation on the effect of precipitation hardening on the impact toughness of 7020 Al–Zn–Mg alloy. Mater Sci Eng A 382:395–400
136.
Gür CH, Yildiz I (2008) Utilization of non-destructive methods for determining the effect of age-hardening on impact toughness of 2024 Al–Cu–Mg alloy. J Nondestruct Eval 27:99–104
137.
Gür CH, Yildiz I (2004) Determining the impact toughness of age hardened 2024 AL-alloy by nondestructive measurements. In: Proceeding of the 16th world conference on NDT, Montreal, Canada
138.
Kumar A, Rajkumar KV, Jayakumar T, Raj B, Mishra B (2006) Ultrasonic measurements for in-service assessment of wrought Inconel 625 cracker tubes of heavy water plants. J Nuclear Mater 350:284–292
139.
Albuqueque VHC, Silva CC, Normando PG, Moura EP, Tavares JMRS (2012) Thermal aging effects on the microstructure of Nb-bearing nickel based superalloy weld overlays using ultrasound techniques. Mater Des 36:337–347
140.
Palanichamy P, Mathew MD, Latha S, Jaykumar T, Rao KBS, Mannan SL, Raj B (2001) Assessing microstructural changes in alloy 625 using ultrasonic waves and correlation with tensile properties. Scr Mater 45:1025–1030
141.
Shah BK, Nanekar PP, Bandyopadhyay M (1996) Ultrasonic characterization of aging degradation during long term high temperature exposure in Nickel base alloy 625. In: Proceeding of 14th world conference on NDT, New Delhi, pp 2235–2238
142.
Kumar A, Shankar V, Jaykumar T, Rao KBS, Raj B (2002) Correlation of microstructure and mechanical properties with ultrasonic velocity in the Ni-based superalloy Inconel 625. Philos Mag A 82:2529–2545
143.
Kumar A, Shankar V, Jayakumar T, Rao, KBS, Raj B (2002) Effect of precipitates on the correlation of ultrasonic velocity with mechanical properties in Ni-based superalloy Inconel 625. In: Proceeding of European conference on nondestructive testing, Spain
144.
Nishara Begum A, Rajendran V, Jayakumar T, Palanichamy P, Priyadharsini N, Aravindan S, Raj B (2007) On-line ultrasonic velocity measurements for characterization of microstructural evaluation during thermal aging of β-quenched zircaloy-2. Mater Charact 58:563–570
145.
Gopalan P, Rajaraman R, Amarendra G, Sundar CS, Viswanathan B, Jayakumar T, Palanichamy P, Raj B (2005) Characterisation of β-quenched and thermally aged Zircaloy-2 by positron annihilation, hardness and ultrasonic velocity measurements. J Nuclear Mater 345:162–166
146.
Jayakumar T, Palanichamy P, Raj B (1998) Detection of hard intermetallics in b-quenched and thermally aged Zircaloy-2 using ultrasonic measurements. J Nuclear Mater 255:243–249
147.
Shankar V, Rao KBS, Mannan SL (2001) Microstructure and mechanical properties of Inconel 625 superalloy. J Nuclear Mater 288:222–232
148.
Murthy GVS, Ghosh S, Das M, Ghosh RN (2008) Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263. Mater Sci Eng, A 488:398–405
149.
Murthy GVS, Sridhar G, Kumar A, Jaykumar T (2009) Characterization of intermetallic precipitates in Nimonic alloy by ultrasonic velocity measurements. Mater Charact 60:234–239
150.
Murthy GVS, Das SK, Ravikumar B (2014) Comprehensive microstructural characterization of γ’ in a nimonic alloy using ultrasonic velocity measurements. Metallogr Microstruct Anal. doi:10.​1007/​s13632-014-0143-7
151.
Jayakumar T (1997) Microstructural characterization in metallic materials using ultrasonic and magnetic methods. PhD Thesis, University of Saarland
152.
Kumar A, Jayakumar T, Raj B (2000) Ultrasonic spectral analysis for microstructural characterization of austenitic and ferritic steels. Phil Mag A 80:2469–2487
153.
Iacoviello F, Casari F, Gialanella S (2005) Effect of “475 °C embrittlement” on duplex stainless steels localized corrosion resistance. Corr Sci 47:909–922
154.
Chen TH, Weng KL, Yang JR (2002) The effect of high temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steel. Mater Sci Eng A 338:259–270
155.
Silva E, Albuquerque VHC, Leite JP, Varela AG, Moura EP, Tavares JMRS (2009) Phase transformation evaluation on a UNS S31803 duplex stainless steel based on nondestructive testing. Mater Sci Eng A 516:126–130
156.
Freitas VLA, Normando PG, Albuquerque VHC, Silva E, Silva AA, Tavares JMRS (2011) Nondestructive characterization and evaluation of embrittlement kinetics and elastic constants of duplex stainless steel SAF 2205 for different aging time at 425 °C and 475 °C. J Nondestruct Eval 30:130–136
157.
Pohl M, Storz O, Glogowski T (2007) Effect of intermetallic precipitations on the properties of duplex stainless steel. Mater Charact 58:65–71
158.
Albuquerque VHC, Silva E, Leite JP, Moura EP, Freitas VLA, Tavares JMRS (2010) Spinodal decomposition mechanism study on the duplex stainless steel UNS S31803 using ultrasonic speed measurement. Mater Des 31:2147–2150
159.
Matsubara S, Yokono Y, Nagano Y, Imanaka T, Kawaguchi Y, Mitsuda H, Okano Y (1999) Evaluation of thermal aging of duplex stainless steel by means of sound velocity measurement in the fine region using phase interference technique. In: Proceedings of 7th international conference on nuclear engineering, Japan, pp 19–23
160.
Matsubara S, Yokono Y, Imanaka T, Kawaguchi Y, Mitsuda H, Okano Y (1998) Evaluation of thermal ageing in duplex stainless steel by velocity measurements of surface acoustic wave. In: Proceedings of 1st international conference on NDE in relation to structural integrity for nuclear and pressurised components, Netherlands, pp 20–22
161.
Tane M, Ichitsubo T, Ogi H, Hirao M (2003) Elastic property of aged duplex stainless steel. Scr Mater 48:229–234
162.
Choo WK, Kim HJ, Yoon JC (1997) Microstructure changes in austenitic Fe–30.0 wt% Mn–7.8 wt% Al–1.3 wt% C initiated by spinodal decomposition and its influence on mechanical properties. Acta Mater 45:4877–4885
163.
Ruiz A, Ortiz N, Carreon H, Rubio C (2009) Utilization of ultrasonic measurement for determining the variation in microstructure of thermally degraded 2205 duplex stainless steel. J Nondestruct Eval 28:131–139
164.
Ruiz A, Ortiz N, Medina A, Kim JK, Jacobs LJ (2013) Application of ultrasonic methods for early detection of thermal damage in 2205 duplex stainless steel. NDT E Int 54:19–26
165.
Jhang KY (2009) Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: a review. Int J Prec Eng Manuf 10:123–135
166.
Xiang Y, Deng M, Xuan FZ, Liu CJ (2011) Experimental study of thermal degradation in ferritic Cr–Ni alloy steel plates using nonlinear Lamb waves. NDT E Int 44:768–774
167.
Hurley DC, Balzar D, Purtscher PT (2000) Nonlinear ultrasonic assessment of precipitation hardening in ASTM A710 steel. J Mater Res 15:2036–2042
168.
Abd Rashid MW, Gakim M, Rosli ZM, Azam MA (2012) Formation of Cr23C6 during the sensitization of AISI 304 stainless steel and its effect to pitting corrosion. Int J Electrochem Sci 7:9465–9477
169.
170.
Stella J, Cerezo J, Rodriguez E (2009) Characterization of the sensitization degree in the AISI 304 stainless steel using spectral analysis and conventional ultrasonic techniques. NDT E Int 42:267–274
171.
Li F, Xiang D, Qin Y, Pond RB Jr, Slusarski K (2011) Measurements of degree of sensitization (DOS) in aluminum alloys using EMAT ultrasound. Ultrasonics 51:561–570
Metadaten
Titel
On the correlation between microstructural evolution and ultrasonic properties: a review
verfasst von
Meysam Toozandehjani
Khamirul Amin Matori
Farhad Ostovan
Faizal Mustapha
Nur Ismarrubie Zahari
Arshin Oskoueian
Publikationsdatum
01.04.2015
Verlag
Springer US
Erschienen in
Journal of Materials Science / Ausgabe 7/2015
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI
https://doi.org/10.1007/s10853-015-8855-x

Weitere Artikel der Ausgabe 7/2015

Journal of Materials Science 7/2015 Zur Ausgabe

Original Paper

Contact damage of hard and brittle thin films on ductile metallic substrates: an analysis of diamond-like carbon on titanium substrates

Original Paper

Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy

Original Paper

Graphene and carbon nanotubes for the synergistic reinforcement of polyamide 6 fibers

Original Paper

The impact of nanocrystalline diamond grain boundary chemistry on frictional response in sliding contact with 319Al alloy

Original Paper

Nanoscale morphologies at alloyed and irradiated metal-oxide bilayers

Original Paper

Synthesis of amino-functionalized mesoporous materials with environmentally friendly surfactants by evaporation-induced self-assembly and their application to the adsorption of lead(II) ions

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise