nach oben

Journal of Materials Science

Erschienen in:

30.11.2022 | Review

The effect of sintering parameters and MgO ratio on structural properties in Al7075/MgO composites: a review

verfasst von: Muharrem Pul, Umit Erdem, Mustafa Burak Turkoz, Gürcan Yildirim

Erschienen in: Journal of Materials Science | Ausgabe 2/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this experimental study, Al7075 matrix composites reinforced with different proportions of MgO were produced by powder metallurgy method. Different sintering temperatures and times were applied in the powder metallurgy production process. In the second stage of the experimental study, firstly, the porosity and hardness measurements of the composite materials were made. Then, microstructure images were taken with SEM and optical microscope, and XRD analyzes were performed. Using the obtained data, the effects of different MgO ratios and different sintering parameters on the structural properties of composite materials were evaluated. As the sintering temperature increased, the density of the composite structure increased and then decreased again. Accordingly, the amount of porosity first decreased and then increased again. Significant size growth occurred in all samples sintered at 600 °C. This change was associated with the high amount of porosity in the same samples. A more stable microstructure was obtained from the samples sintered at 550 °C. Thus, it can be said that the presence of excess MgO particles in the system causes the material quality to deteriorate due to increased microscopic structural problems, wetting rates, intergranular interaction problems between adjacent layers, recovery mechanism and entanglement of voids, and dislocations. Therefore, the ideal rate, time and temperature value for MgO addition should be carefully determined. As a result, it was seen that the sintering temperature of 550 °C gave the most suitable results. The sintering time strengthened the phase volume of the Al7075 alloy, making the compound more stable.

Vorheriger Artikel A review of 1D magnetic nanomaterials in microwave absorption

Nächster Artikel A review on lignocellulose chemistry, nanostructure, and their impact on interfacial interactions for sustainable products development

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Manohar G, Maity SR, Pandey KM (2022) Microstructural and mechanical properties of microwave sintered AA7075/graphite/SiC hybrid composite fabricated by powder metallurgy techniques. SILICON 14(10):5179–5189CrossRef

Jørgensen MJ, Primdahl S, Bagger C, Mogensen M (2001) Effect of sintering temperature on microstructure and performance of LSM–YSZ composite cathodes. Solid State Ionics 139(1–2):1–11CrossRef

Karakoc H, Ovalı I, Dündar S, Citak R (2019) Wear and mechanical properties of Al6061/SiC/B₄C hybrid composites produced with powder metallurgy. J Mater Res Technol 28(6):5348–5361

Ghasali E, Alizadeh M, Ebadzadeh T, Pakseresht AH, Rahbari A (2015) Investigation on microstructural and mechanical properties of B₄C–aluminum matrix composites prepared by microwave sintering. J Mater Res Technol 4(4):411–415CrossRef

Khoshghadam-Pireyousefan M, Rahmanifard R, Orovcik L, Švec P, Klemm V (2020) Application of a novel method for fabrication of graphene reinforced aluminum matrix nanocomposites: synthesis, microstructure, and mechanical properties. Mater Sci Eng, A 772:138820CrossRef

Al-Mosawi BT, Wexler D, Calka A (2017) Characterization and mechanical properties of α-Al₂O₃ particle reinforced aluminium matrix composites, synthesized via uniball magneto-milling and uniaxial hot pressing. Adv Powder Technol 28(3):1054–1064CrossRef

Majidian H, Ghasali E, Ebadzadeh T, Razavi M (2016) Effect of heating method on microstructure and mechanical properties of zircon reinforced aluminum composites. Mater Res 19:1443–1448CrossRef

Mosleh-Shirazi S, Akhlaghi F, Li DY (2016) Effect of graphite content on the wear behavior of Al/2SiC/Gr hybrid nano-composites respectively in the ambient environment and an acidic solution. Tribol Int 103:620–628CrossRef

Sherif ESM, Latief FH, Junaedi H, Almajid AA (2012) Influence of exfoliated graphite nanoplatelets particles additions and sintering temperature on the mechanical properties of aluminum matrix composites. Int J Electrochem Sci 7(5):4352–4361

10.

Chintada S, Dora SP, Kare D (2021) Mechanical behavior and metallographic characterization of microwave sintered Al/SiC composite materials–an experimental approach. SILICON 4(12):1–12

11.

Albert T, Sunil J, Christopher AS, Jegan R, Prabhu PA, Selvaganesan M (2021) Preparation and characterization of aluminium-titanium carbide (Al-TiC) composite using powder metallurgy. Mater Today: Proc 37:1558–1561

12.

Sadooghi A, Hashemi SJ (2019) Investigating the influence of ZnO, CuO, Al₂O₃ reinforcing nanoparticles on strength and wearing properties of aluminum matrix nanocomposites produced by powder metallurgy process. Mater Res Express 6(10):105019CrossRef

13.

Sweet GAW, Williams BW, Taylor A, Hexemer RL, Donaldson IW, Bishop DP (2020) A microstructural and mechanical property investigation of a hot upset forged 2xxx series aluminum powder metallurgy alloy reinforced with AlN. J Mater Process Technol 284:116742CrossRef

14.

Yar AA, Montazerian M, Abdizadeh H, Baharvandi HR (2009) Microstructure and mechanical properties of aluminum alloy matrix composite reinforced with nano-particle MgO. J Alloy Compd 484(1–2):400–404CrossRef

15.

Aynalem GF (2020) Processing methods and mechanical properties of aluminium matrix composites. Adv Mater Sci Eng 2020:3765791CrossRef

16.

Rahimian M, Parvin N, Ehsani N (2010) Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy. Mater Sci Eng, A 527(4–5):1031–1038CrossRef

17.

Rahimian M, Ehsani N, Parvin N, Reza Baharvandi H (2009) The effect of particle size, sintering temperature and sintering time on the properties of Al–Al₂O₃ composites, made by powder metallurgy. J Mater Process Technol 209(14):5387–5393CrossRef

18.

Konieczny M (2012) The effect of sintering temperature, sintering time and reinforcement particle size on properties of Al–Al₂O₃ composites. Compos Theory Pract 12(1):39–43

19.

Megahed M, Attia MA, Abdelhameed M, El-Shafei AG (2017) Tribological characterization of hybrid metal matrix composites processed by powder metallurgy. Acta Metall Sin (Engl Lett) 30(8):781–790CrossRef

20.

Ozer M, Aydogan SI, Cinici H, Ozer A (2022) Effects of sintering techniques and parameters on microstructure and mechanical properties of Al-15Si-2, 5Cu-0.5Mg compacts and Al-15Si-2, 5Cu-0.5 Mg/B4C composites. Mater Today Commun 30:103192CrossRef

21.

Surya MS (2022) Effect of SiC weight percentage and sintering duration on microstructural and mechanical behaviour of Al6061/SiC composites produced by powder metallurgy technique. SILICON 14(6):2731–2739CrossRef

22.

Padmavathi C, Upadhyaya A (2010) Densification, microstructure and properties of supersolidus liquid phase sintered 6711Al-SiC metal matrix composites. Sci Sinter 42:363–382CrossRef

23.

Aydoğan S, Özer M, Çinici H, Özer A (2020) Effects of sintering temperature on density and microstructure of Al-15Si-2.5 Cu 0.5Mg/B₄C Composites. In: International conference on advanced materials science & engineering and high tech devices applications; exhibition (ICMATSE 2020)

24.

Venkateswarlu K, Saurabh S, Rajinikanth V, Sahu RK, R. K., & Ray, A. K. (2010) Synthesis of TiN reinforced aluminium metal matrix composites through microwave sintering. J Mater Eng Perform 19:231–236CrossRef

25.

Wu C, Fang P, Luo G, Chen F, Shen Q, Zhang L, Lavernia EJ (2014) Effect of plasma activated sintering parameters on microstructure and mechanical properties of Al-7075/B₄C composites. J Alloy Compd 615:276–282CrossRef

26.

Xu L, Zhang F, Yue X, Tian Q (2016) Advance on Al₂O₃ particulates reinforced aluminum metal matrix composites (Al-MMCs) manufactured by the power metallurgy (PM) methods-improved PM techniques. In: MATEC web of conferences, vol 67. EDP Sciences, p 06098

27.

Manohar G, Pandey KM, Maity SR (2021) Effect of microwave sintering on the microstructure and mechanical properties of AA7075/B₄C/ZrC hybrid nano composite fabricated by powder metallurgy techniques. Ceram Int 47(23):32610–32618CrossRef

28.

Baghchesara MA, Abdizadeh H (2012) Microstructural and mechanical properties of nanometric magnesium oxide particulate-reinforced aluminum matrix composites produced by powder metallurgy method. J Mech Sci Technol 26(2):367–372CrossRef

29.

Rahimian M, Ehsani N, Parvin N, Baharvandi HR (2009) The effect of sintering temperature and the amount of reinforcement on the properties of Al–Al₂O₃ composite. Mater Des 30(8):3333–3337CrossRef

30.

Oketola A, Jamiru T, Adesola Taoreed Adegbola AT, Ogunbiyi O, Sadiku R, Salifu S (2022) Influence of sintering temperature on the microstructure, mechanical and tribological properties of ZrO₂ reinforced spark plasma sintered Ni-Cr. Int J Lightw Mater Manuf 5:188–196

31.

Vani VV, Chak SK (2018) The effect of process parameters in aluminum metal matrix composites with powder metallurgy. Manuf Rev 5:7

32.

Gürbüz M, Can Şenel M, Koç E (2018) The effect of sintering time, temperature, and graphene addition on the hardness and microstructure of aluminum composites. J Compos Mater 52(4):553–563CrossRef

33.

Umasankar V, Xavior MA, Karthikeyan S (2014) Experimental evaluation of the influence of processing parameters on the mechanical properties of SiC particle reinforced AA6061 aluminium alloy matrix composite by powder processing. J Alloy Compd 582:380–386CrossRef

34.

Post D, Han B, Ifju P (1997) High sensitivity moiré: experimental analysis for mechanics and materials. Springer

35.

Hashim J, Looney L, Hashmi MSJ (2001) The enhancement of wettability of SiC particles in cast alüminium matrix composites. J Mater Process Technol 119:329–335CrossRef

36.

Grathwohl P (1998) Diffusion in natural porous media: contaminant transport, sorption/desorption and dissolution kinetics. Kluwer Academic

37.

Grathwohl P (1998) Modelling of diffusion processes. In: Diffusion in natural porous media. Springer, Boston, MA, p 43–81

38.

Mármol G, Savastano H (2017) Study of the degradation of non-conventional MgO-SiO₂ cement reinforced with lignocellulosic fibers. Cement Concr Compos 80:258–267CrossRef

39.

Tan CY, Yaghoubi A, Ramesh S, Adzila S, Purbolaksono J, Hassan MA, Kutty MG (2013) ”Sintering and mechanical properties of MgO-doped nanocrystalline hydroxyapatite" (PDF). Ceram Int 39(8):8979–8983CrossRef

40.

Parkin SSP, Kaiser C, Panchula A, Rice PM, Hughes B, Samant M, Yang SH (2004) Giant tunnelling magnetoresistance at room temperature with MgO (100) tunnel barriers. Nat Mater 3(12):862–867 (Bibcode:2004NatMa...3..862P)CrossRef

41.

Rao KS (2017) Sliding wear behavior of cast Al-7075 alloy reinforced with MgO particulates. Mater Today: Proc 4(10):11096–11101

42.

Pasha SS, Imran M, Harish SN (2020) Wear rate and hardness characteristics of Al7075/kyanite (Al₂SiO₅) composites. Materials Today: Proceedings 26:922–928

43.

Zalaoglu Y, Turgay T, Ulgen AT, Erdem U, Turkoz MB, Yildirim G (2020) A novel research on the subject of the load-independent microhardness performances of Sr/Ti partial displacement in Bi-2212 ceramics. J Mater Sci: Mater Electron 31(24):22239–22251

44.

Ulgen AT, Erdem Ü, Yildirim G, Turkoz MB, Turgay T (2022) Contribution of vanadium particles to thermal movement of correlated two-dimensional pancake Abrikosov vortices in Bi-2223 superconducting system. Bol Soc Esp Cerám Vidr. https://doi.org/10.1016/j.bsecv.2022.02.006CrossRef

45.

Kumar M, Isloor AM, Todeti SR, Nagaraja HS, Ismail AF, Susanti R (2021) Effect of binary zinc-magnesium oxides on polyphenylsulfone/cellulose acetate derivatives hollow fiber membranes for the decontamination of arsenic from drinking water. Chem Eng J 405:126809CrossRef

46.

Risbud SH, Groza JR, Kim MJ (1994) Clean grain boundaries in aluminium nitride ceramics densified without additives by a plasma-activated sintering process. Philos Mag B 69(3):525–533CrossRef

47.

Bird RB, Stewart WE, Lightfoot EN (1976) Transport phenomena. Wiley

48.

Irhayyim SS, Hammood HS, Mahdi AD (2020) Mechanical and wear properties of hybrid aluminum matrix composite reinforced with graphite and nano MgO particles prepared by powder metallurgy technique. AIMS Mater Sci 7:103–115CrossRef

49.

Knapek M, Zemková M, Greš A, Jablonská E, Lukáč F, Král R, Minárik P (2021) Corrosion and mechanical properties of a novel biomedical WN43 magnesium alloy prepared by spark plasma sintering. J Magn Alloys 9(3):853–865CrossRef

50.

Gong X, Wang Z, Wang Z, Cao J, Zhang S (2018) Roles of impurities on sintering structure and thermal strength of CaO-containing carbon pellet and the CaO sintering kinetic analysis. Powder Technol 336:92–101CrossRef

51.

Alhazaa AN, Khan TI (2010) Diffusion bonding of Al7075 to Ti–6Al–4V using Cu coatings and Sn–3.6 Ag–1Cu interlayers. J Alloys Compd 494(1–2):351–358CrossRef

52.

Kenevisi MS, Khoie SM (2012) A study on the effect of bonding time on the properties of Al7075 to Ti–6Al–4V diffusion bonded joint. Mater Lett 76:144–146CrossRef

53.

Kumari L, Li WZ, Vannoy CH, Leblanc RM, Wang DZ (2009) Synthesis, characterization and optical properties of Mg (OH)₂ micro-/nanostructure and its conversion to MgO. Ceram Int 35(8):3355–3364CrossRef

54.

Cullity BD, Stock SR (2014) Elements of X-ray diffraction, 3rd edn. Pearson, printed in USA

55.

Kaviyarasu K, Manikandan E, Kennedy J, Maaza M (2015) A comparative study on the morphological features of highly ordered MgO: AgO nanocube arrays prepared via a hydrothermal method. RSC Adv 5(100):82421–82428CrossRef

56.

Fuku X, Matinise N, Masikini M, Kasinathan K, Maaza M (2018) An electrochemically active green synthesized polycrystalline NiO/MgO catalyst: use in photo-catalytic applications. Mater Res Bull 97:457–465CrossRef

57.

Zavodinsky VG (2004) The mechanism of ionic conductivity in stabilized cubic zirconia. Phys Solid State 46(3):453–457CrossRef

Titel: The effect of sintering parameters and MgO ratio on structural properties in Al7075/MgO composites: a review
verfasst von: Muharrem Pul
Umit Erdem
Mustafa Burak Turkoz
Gürcan Yildirim
Publikationsdatum: 30.11.2022
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 2/2023
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-022-08003-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2023

Review on acoustic emission source location, damage recognition and lifetime prediction of fiber-reinforced composites

Process design of variable fiber content in layers of needle-punched preforms

Effect of external parallel electric field on corrosion inhibition of carbon dots for carbon steel in 1 M HCl solution

How science runs, by Eric J. Mittemeijer, Springer Nature Switzerland AG 2022

Microwave-assisted green synthesis of asphaltene-based carbon dots for micelle sensitized fluorescent probes

Publisher Correction: Experimental investigation and correlation of elevated temperature mechanical behaviour of Zr-2.5Nb alloy

Premium Partner

Marktübersichten