nach oben

Journal of Polymer Research

Erschienen in:

01.05.2022 | Original Paper

One-pot synthesis of symmetrical and unsymmetrical α-diimine Nickel complexes in comparison with two-pot synthesis method for ethylene polymerization

verfasst von: Maryam Sadat Beheshti, Hassan Arabi

Erschienen in: Journal of Polymer Research | Ausgabe 5/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Several symmetrical and unsymmetrical α-diimine Nickel complexes synthesized with a novel method. Complexes symmetrical and unsymmetrical [Ar₁N = C(Nap)-C(Nap) = NAr₂] NiBr₂(Nap = Acenaphthenequinone) (1, Ar₁, Ar₂ = 2,6-ipr; 2Ar₁, Ar₂ = 2,4,6-trimethylphenyl; 3Ar₁ = 2,6-ipr, Ar₂ = 2,4,6-trimethylphenyl) were synthesized and used as catalyst precursors for ethylene polymerization. These complexes were prepared by the reaction of one-pot in which the ligand is catalyzed by an acid catalyzed condensation followed by direct addition of Nickel dibromide. The complexes were also provided by a two-step processes in which the ligands were first formed by concentration between the suitable anilines and quinones, and the out coming ligand were then allowed to react with 1,2-Dimethoxyethane—dibromonickel. Ethylene polymerizations catalyzed by these nickel α-diimine complexes activated by modified methylaluminumoxide (MMAO) were systematically investigated. The activity of C1 and C2 complexes were prepared by single pot method (1166.8 and 3870.03 g PE/ (mol Ni.hr), respectively. In C1 catalyst, the activity is more than two times that of the complex prepared by the two-step method (485 (g PE / (mol Ni.hr)), and in C2 catalyst there is an increase in activity, but this amount is lower (3066.6 (gr PE / (mol Ni.hr)). The polymer produced from the asymmetrical C3 complex with one pot (2631.6 g polymer/ (mol Ni.hr) is approximately 4 times more than that of two pot (666.8 g polymer/ (mol Ni.hr)). Polymer molecular weight and resulting polymer microstructure were changed according to the catalyst structure modification and polymerization parameters and produced high molecular weight polyethylene.

Vorheriger Artikel Composite nanoarchitectonics of poly(vinylidene fluoride)/graphene for thermal and electrical conductivity enhancement via constructing segregated network structure

Nächster Artikel Bisfuranic copolyesters bearing nitrated units: synthesis, thermal properties and degradation essays

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ittel SD, Johnson LK, Brookhart M (2000) Late-metal catalysts for ethylene homo- and copolymerization. Chem Rev 100(4):1169–1204. https://doi.org/10.1021/cr9804644CrossRefPubMed

Diamanti SJ, Ghosh P, Shimizu F, Bazan GC (2003) Ethylene homopolymerization and copolymerization with functionalized 5-norbornen-2-yl monomers by a novel nickel catalyst system. Macromolecules 36(26):9731–9735. https://doi.org/10.1021/ma035102zCrossRef

Mu H, Pan L, Song D, Li Y (2015) Neutral nickel catalysts for olefin homo- and copolymerization: relationships between catalyst structures and catalytic properties. Chem Rev 115(22):12091–12137. https://doi.org/10.1021/cr500370fCrossRefPubMed

Camacho DH, Guan Z (2010) Designing late-transition metal catalysts for olefin insertion polymerization and copolymerization. Chem Commun 46(42):7879–7893. https://doi.org/10.1039/C0CC01535KCrossRef

Leatherman MD, Svejda SA, Johnson LK, Brookhart M (2007) Mechanistic studies of nickel(ii) alkyl agostic cations and alkyl ethylene complexes: investigations of chain propagation and isomerization in (α-diimine) ni(ii)-catalyzed ethylene polymerization. J Am Chem Soc 125(10):3068–3081. https://doi.org/10.1021/ja021071wCrossRef

Guo L, Dai S, Sui X, Chen C (2016) Palladium and nickel catalyzed chain walking olefin polymerization and copolymerization. ACS Catal 6(1):428–441. https://doi.org/10.1021/acscatal.5b02426CrossRef

Svejda SA, Johnson LK, Brookhart M (1999) Low-temperature spectroscopic observation of chain growth and migratory insertion barriers in (α-diimine) Ni(II) olefin polymerization catalysts. J Am Chem Soc 121(45):10634–10635. https://doi.org/10.1021/ja991931hCrossRef

Popeney CS, Guan Z (2010) Effect of ligand electronics on the stability and chain transfer rates of substituted Pd(II) α-diimine catalysts. Macromolecules 43(9):4091–4097. https://doi.org/10.1021/ma100220nCrossRef

Maldanis RJ, Wood JS, Chandrasekaran A, Rausch MD, Chien JCW (2002) The formation and polymerization behavior of Ni(II) α-diimine complexes using various aluminum activators. J Organomet Chem 645(1):2158–2167. https://doi.org/10.1016/S0022-328X(01)01340-7CrossRef

10.

Climent MJ, Corma A, Iborra S (2011) Heterogeneous catalysts for the one-pot synthesis of chemicals and fine chemicals. Chem Rev 111(2):1072–1133. https://doi.org/10.1021/cr1002084CrossRefPubMed

11.

Arabi H, Beheshti MS, Yousefi M, Ghasemi Hamedani N, Ghafelebashi M (2013) Study of triisobutylaluminum as cocatalyst and processing parameters on ethylene polymerization performance of α-diimine nickel(II) complex by response surface method. Polym Bull 70(10):2765–2781. https://doi.org/10.1007/s00289-013-0986-0CrossRef

12.

Liu J, Li Y, Li Y, Hu N (2008) Ethylene polymerization by (α-diimine) Ni(II) complexes bearing different substituents on para-position of imines activated with MMAO. J Appl Polym Sci 109(2):700–707. https://doi.org/10.1002/app.28134CrossRef

13.

Schmiege BM, Carney MJ, Small BL, Gerlach DL, Halfen JA (2007) Alternatives to pyridinediimine ligands: Syntheses and structures of metal complexes supported by donor-modified α-diimine ligands. J Chem Soc Dalt Trans 24:2547–2562. https://doi.org/10.1039/B702197FCrossRef

14.

Jeon M, Han CJ, Kim SY (2006) Polymerizations of propylene with unsymmetrical (α-diimine)nickel(II) catalysts. Macromol Res 14(3):306–311. https://doi.org/10.1007/BF03219086CrossRef

15.

Ghasemi Hamedani N, Arabi H (2015) Systematic study of Nickel(II) α-diiminecomplex performance on ethylene polymerization: Influence of cocatalystnature. Polym Bull 72:2471–2488. https://doi.org/10.1007/s00289-015-1412-6CrossRef

16.

Patil NT, Shinde VS, Gajula B (2012) A one-pot catalysis: The strategic classification with some recent examples. Org Biomol Chem 10(2):211–224. https://doi.org/10.1039/C1OB06432KCrossRefPubMed

17.

Zou H, Hu S, Huang H, Zhu F, Wu Q (2007) Synthesis of bimodal molecular weight distribution polyethylene with a-diimine Ni(II) complexes containing unsym-substituted aryl groupsin the presence of methylaluminoxane. Europ Polym J 43:3882–3891. https://doi.org/10.1016/j.eurpolymj.2007.06.028CrossRef

18.

Liu H, Zhao W, Hao X, Redshaw C, Huang W, Sun WH (2011) 2,6-dibenzhydryl-N-(2-phenyliminoacenaphthylenylidene)-4-methylbenzen amine Nickel dibromides:Synthesis. Characterization and Ethylene Polymerization, Organometallics 30:2418–2424. https://doi.org/10.1021/om200154aCrossRef

19.

Kovach J, Peralta M, Brennessel WW, Jones WD (2011) Synthesis and X-ray crystallographic characterization of substituted aryl imines. J Mol Struct 992:33–38. https://doi.org/10.1016/j.molstruc.2011.02.027CrossRef

20.

Jeon M, Kim SY (2008) Ethylene polymerizations with unsymmetrical (α-diimine) nickel(ii) catalysts. Polym J 40:409–413. https://doi.org/10.1295/polymj.PJ2007175CrossRef

21.

Sun WH, Wang K, Wedeking K, Zhang D, Zhang S, Cai J, Li Y (2007) Synthesis, Characterization, and Ethylene Oligomerization of NickelComplexes Bearing N-((Pyridin-2-yl)methylene)quinolin-8-amine Derivatives. Organometallics 26(19):4781–4790. https://doi.org/10.1021/om700440vCrossRef

22.

Hou J, Sun WH, Zhang S, Ma H, Deng Y, Lu X (2006) Synthesis and characterization of tridentate nickel complexes bearing p^∧n^∧n and p^∧n^∧p ligands and their catalytic property in ethylene oligomerization. Organometallics 25:236–244. https://doi.org/10.1021/om0507979CrossRef

23.

Kunrath FA, Mota FF, Casagrande OL Jr, Mauler RS, Souza RF (2002) Synthesis and characterization of hyperbranched polyethylenes made with nickel-α-diimine catalysts. Macromol Chem Phys 203(17):2407–2411. https://doi.org/10.1002/macp.200290019CrossRef

24.

Park D, Kim I, Ha C (2003) Crystalline and viscoelastic properties of branched polyethylenes synthesized using bidentate nickel (ii) catalyst. Polymer 44(26):8177–8184. https://doi.org/10.1016/j.polymer.2003.10.021CrossRef

25.

AlObaidi F, Ye Z, Zhu S (2004) Ethylene polymerization with homogeneous nickel-diimine catalysts: effects of catalyst structure and polymerization conditions on catalyst activity and polymer properties”. Polymer 45(20):6823–6829. https://doi.org/10.1016/j.polymer.2004.08.018CrossRef

26.

Zou HAO, Zhu FM, Wu Q, Ai JYAN, Lin SAN (2004) Synthesis of long-chain-branched polyethylene by ethylene homopolymerization with a novel nickel (ii) α-diimine catalyst. J Polym Sci Part A Polym Chem 43(7):1325–1330. https://doi.org/10.1002/pola.20596CrossRef

27.

Eynde SV, Mathot V, Koch MHJ, Reynaers H (2000) Thermal behaviour and morphology of homogeneous ethylene - propylene and ethylene-1-butene copolymers with high comonomer contents. Polymer 41(9):3437–3453. https://doi.org/10.1016/S0032-3861(99)00501-7CrossRef

28.

Gates DP, Svejda SA, Oñate E, Killian CM, Johnson LK, White PS (2000) synthesis of branched polyethylene using (α-diimine)nickel(ii) catalysts: influence of temperature ethylene pressure, and ligand structure on polymer properties. Macromolecules 33(7):2320–2334. https://doi.org/10.1021/ma991234CrossRef

29.

Calucci L, Cicogna F, Forte C (2013) Effects of post-reactor functionalization on the phase behaviour of an ethylene-1-octene copolymer studied using solid-state high resolution ¹³CNMR spectroscopy. Phys Chem Chem Phys 15(37):15584–15594. https://doi.org/10.1039/C3CP52316KCrossRefPubMed

30.

Kumar KR, Sivaram S (2000) Ethylene polymerization using iron(II) bis(imino) pyridyl and nickel (diimine) catalysts: effect of cocatalysts and reaction parameters. Macromol Chem Phys 201(13):1513–1520. https://onlinelibrary.wiley.com/doi/10.1002/1521-3935(20000801)201:13%3C1513::AID-MACP1513%3E3.0.CO;2-X

31.

Galland GB, De Souza RF, Mauler RS, Nunes FF (1999) ¹³CNMR Determination of the Composition of Linear Low-Density Polyethylene Obtained with [η³-Methallyl-nickel-diimine]PF6 Complex nary development of the homogeneous catalysts based. Macromolecules 32:1620–1625. https://doi.org/10.1021/ma981669hCrossRef

32.

Jung M, Lee Y, Kwak S, Park H, Kim B, Kim S, Lee KH, Cho HS, Hwang KY (2016) Analysis of chain branch of polyolefins by a new proton nmr approach. Anal Chem 88:1516–1520. https://doi.org/10.1021/acs.analchem.5b04357CrossRefPubMed

Titel: One-pot synthesis of symmetrical and unsymmetrical α-diimine Nickel complexes in comparison with two-pot synthesis method for ethylene polymerization
verfasst von: Maryam Sadat Beheshti
Hassan Arabi
Publikationsdatum: 01.05.2022
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 5/2022
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-022-03049-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2022

Thermal, optical and electrical properties of WO3/carboxymethyl cellulose/polyvinyl alcohol composite synthesized by laser ablation

The efficacy of methyl vinyl silicone-g-maleic anhydride in the compatibilization of fluoroelastomer and silicone based super specialty elastomer blend

Research on super-hydrophobic surface treatment and performance of tennis hand glue

Composite nanoarchitectonics of poly(vinylidene fluoride)/graphene for thermal and electrical conductivity enhancement via constructing segregated network structure

Crystalline phases thermal behaviour and radio frequencies dielectric properties of PVDF/PEO/metal oxides hybrid polymer nanocomposite films

Thermoplastic polyurethane/rutile titanium dioxide composites tuned for hydrophobicity with effective reinforcement

Premium Partner

Marktübersichten