Removal of heavy metals from aqueous solutions using Fe₃O₄, ZnO, and CuO nanoparticles

This study investigated the removal of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ from aqueous solutions with novel nanoparticle sorbents (Fe₃O₄, ZnO, and CuO) using a range of experimental approaches, including, pH, competing ions, sorbent masses, contact time, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The images showed that Fe₃O₄, ZnO, and CuO particles had mean diameters of about 50 nm (spheroid), 25 nm (rod shape), and 75 nm (spheroid), respectively. Tests were performed under batch conditions to determine the adsorption rate and uptake at equilibrium from single and multiple component solutions. The maximum uptake values (sum of four metals) in multiple component solutions were 360.6, 114.5, and 73.0 mg g⁻¹, for ZnO, CuO, and Fe₃O₄, respectively. Based on the average metal removal by the three nanoparticles, the following order was determined for single component solutions: Cd²⁺ > Pb²⁺ > Cu²⁺ > Ni²⁺, while the following order was determined in multiple component solutions: Pb²⁺ > Cu²⁺ > Cd²⁺ > Ni²⁺. Sorption equilibrium isotherms could be described using the Freundlich model in some cases, whereas other isotherms did not follow this model. Furthermore, a pseudo-second order kinetic model was found to correctly describe the experimental data for all nanoparticles. Scanning electron microscopy, energy dispersive X-ray before and after metal sorption, and soil solution saturation indices showed that the main mechanism of sorption for Cd²⁺ and Pb²⁺ was adsorption, whereas both Cu²⁺ and Ni²⁺ sorption were due to adsorption and precipitation. These nanoparticles have potential for use as efficient sorbents for the removal of heavy metals from aqueous solutions and ZnO nanoparticles were identified as the most promising sorbent due to their high metal uptake.