nach oben

Erschienen in:

01.03.2020

Wetting angle stability of steel surface structures after laser treatment

verfasst von: N. Shchedrina, Y. Karlagina, T. E. Itina, A. Ramos, D. Correa, A. Tokmacheva-Kolobova, S. Manokhin, D. Lutoshina, R. Yatsuk, I. Krylach, G. Odintsova

Erschienen in: Optical and Quantum Electronics | Ausgabe 3/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work, we have used a nanosecond pulsed fiber laser to modify the wettability characteristics of AISI 430 steel. For this, various surface morphologies were created on the samples by laser irradiation with different overlapping and intensity parameters. Immediately upon laser treatment, all the structured samples acquired either hydrophilic or superhydrophilic wetting angles. All the samples were also analyzed with XRD. Then, laser-treated samples were kept in ambient air and/or low-temperature annealing was applied to reach hydrophobic surface properties. Interestingly, these surfaces returned back practically to their initial wetting state by cleaning in an ultrasonic bath. The obtained results are analyzed based on the existing wettability models.

Vorheriger Artikel Yeast cells characterization through near-forward light scattering

Nächster Artikel Inscription of superimposed tilted fiber Bragg gratings

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Avrămescu, R.E., Ghica, M.V., Dinu-Pîrvu, C., Prisada, R., Popa, L.: Superhydrophobic natural and artificial surfaces—a structural approach. Materials 11, 866 (2018). https://doi.org/10.3390/ma11050866ADSCrossRef

Bizi-Bandoki, P., Valette, S., Audouard, E., Benayoun, S.: Time dependency of the hydrophilicity and hydrophobicity of metallic alloys subjected to femtosecond laser irradiations. Appl. Surf. Sci. 273, 399–407 (2013). https://doi.org/10.1016/j.apsusc.2013.02.054ADSCrossRef

Butev, E., Esen, Z., Bor, S.: In vitro bioactivity investigation of alkali treated Ti6Al7Nb alloy foams. Appl. Surf. Sci. 327, 437–443 (2015). https://doi.org/10.1016/j.apsusc.2014.12.005ADSCrossRef

Chantada, A., Penide, J., Riveiro, A., del Val, J., Quintero, F., Meixus, M., Soto, R., Lusquiños, F., Pou, J.: Increasing the hydrophobicity degree of stonework by means of laser surface texturing: an application on Zimbabwe black granites. Appl. Surf. Sci. 418, 463–471 (2017). https://doi.org/10.1016/j.apsusc.2016.12.196ADSCrossRef

Daw, A.E., Kazi, H.A., Colombo, J.S., Rowe, W.G., Williams, D.W., Waddington, R.J., Thomas, D.W., Moseley, R.: Differential cellular and microbial responses to nano-/micron-scale titanium surface roughness induced by hydrogen peroxide treatment. J. Biomater. Appl. 28, 144–160 (2013). https://doi.org/10.1177/0885328212441495CrossRef

Gu, B., Schmitt, J., Chen, Z., Liang, L., McCarthy, J.F.: Adsorption and desorption of different organic matter fractions on iron oxide. Geochim. Cosmochim. Acta 59, 219–229 (1995). https://doi.org/10.1016/0016-7037(94)00282-QADSCrossRef

Huerta-Murillo, D., García-Girón, A., Romano, J.M., Cardoso, J.T., Cordovilla, F., Walker, M., Dimov, S.S., Ocaña, J.L.: Wettability modification of laser-fabricated hierarchical surface structures in Ti-6Al-4V titanium alloy. Appl. Surf. Sci. 463, 838–846 (2018). https://doi.org/10.1016/j.apsusc.2018.09.012ADSCrossRef

Hwang, S.J., Oh, D.J., Jung, P.G., Lee, S.M., Go, J.S., Kim, J.H., Ko, J.S.: Dry etching of polydimethylsiloxane using microwave plasma. J. Micromech. Microeng. 19, 095010 (2009). https://doi.org/10.1088/0960-1317/19/9/095010ADSCrossRef

Joseph, Y., Ranke, W., Weiss, W.: Water on FeO (111) and Fe3O4 (111): Adsorption behavior on different surface terminations. J. Phys. Chem. B 104, 3224–3236 (2000). https://doi.org/10.1021/jp9932012CrossRef

Kietzig, A.M., Hatzikiriakos, S.G., Englezos, P.: Patterned superhydrophobic metallic surfaces. Langmuir 25, 4821–4827 (2009). https://doi.org/10.1021/la8037582CrossRef

Kietzig, A.M., Negar Mirvakili, M., Kamal, S., Englezos, P., Hatzikiriakos, S.G.: Laser-patterned super-hydrophobic pure metallic substrates: Cassie to Wenzel wetting transitions. J. Adhesion Sci. Technol. 25, 2789–2809 (2011). https://doi.org/10.1163/016942410X549988CrossRef

Kietziga, A.M., Mirvakilia, M.N., Kamalb, S., Englezosa, P., Hatzikiriakosa, S.G.: Nanopatterned metallic surfaces: their wettability and impact on ice friction. J. Adhesion Sci. Technol. 25, 1293–1303 (2011). https://doi.org/10.1163/016942411X555872CrossRef

Kim, D., Kim, J.G., Chu, C.N.: Aging effect on the wettability of stainless steel. Mater. Lett. 170, 18–20 (2016). https://doi.org/10.1016/j.matlet.2016.01.107CrossRef

Kolobov, YuR, Smolyakova, MYu, Kolobova, AYu, Ionin, A.A., Kudryashov, S.I., Makarov, S.V., Saltuganov, P.N., Zayarny, D.A., Ligachev, A.E.: Superhydrophylic textures fabricated by femtosecond laser pulses on submicro- and nano-crystalline titanium surfaces. Laser Phys. Lett. 11, 125602 (2014). https://doi.org/10.1088/1612-2011/11/12/125602ADSCrossRef

Li, H., Wang, J.: An experimental study of abrasive waterjet machining of Ti–6Al–4V. Int. J. Adv. Manuf. Technol. 81, 361–369 (2015). https://doi.org/10.1007/s00170-015-7245-5CrossRef

Lieblich, M., Barriuso, S., Ibáñez, J., Ruiz-de-Lara, L., Díaz, M., Ocaña, J.L., Alberdi, A., González-Carrasco, J.L.: On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening. J. Mech. Behav. Biomed. Mater. 63, 390–398 (2016). https://doi.org/10.1016/j.jmbbm.2016.07.011CrossRef

Liu, K., Jiang, L.: Metallic surfaces with special wettability. Nanoscale 3, 825–838 (2011). https://doi.org/10.1039/c0nr00642dADSCrossRef

Long, J., Zhong, M., Zhang, H., Fan, P.: Superhydrophilicity to superhydrophobicity transition of picosecond laser microstructured aluminum in ambient air. J. Colloid Interface Sci. 441, 1–9 (2015). https://doi.org/10.1016/j.jcis.2014.11.015ADSCrossRef

Ngo, C.V., Chun, D.M.: Fast wettability transition from hydrophilic to superhydrophobic laser-textured stainless steel surfaces under low-temperature annealing. Appl. Surf. Sci. 409, 232–240 (2017). https://doi.org/10.1016/j.apsusc.2017.03.038ADSCrossRef

Ngo, C.V., Chun, D.M.: Controlling the wetting properties of superhydrophobic titanium surface fabricated by UV nanosecond-pulsed laser and heat treatment. Nanomaterials 8, 766 (2018). https://doi.org/10.3390/nano8100766CrossRef

Nik, M.G., Movahhedy, M.R., Akbari, J.: Ultrasonic-assisted grinding of Ti6Al4V alloy. Procedia CIRP 1, 353–358 (2012). https://doi.org/10.1016/j.procir.2012.04.063CrossRef

Ravelingien, M., Hervent, A.S., Mullens, S., Luyten, J., Vervaet, C., Remon, J.P.: Influence of surface topography and pore architecture of alkali-treated titanium on in vitro apatite deposition. Appl. Surf. Sci. 256, 3693–3697 (2010). https://doi.org/10.1016/j.apsusc.2010.01.008ADSCrossRef

Rotella, G., Dillon, O.W., Umbrello, D., Settineri, L., Jawahir, I.S.: The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy. Int. J. Adv. Manuf. Technol. 71, 47–55 (2014). https://doi.org/10.1007/s00170-013-5477-9CrossRef

Sciancalepore, C., Gemini, L., Romoli, L., Bondioli, F.: Study of the wettability behavior of stainless steel surfaces after ultrafast laser texturing. Surf. Coat. Technol. 71, 47–55 (2018). https://doi.org/10.1016/j.surfcoat.2018.08.030CrossRef

Song, Y., Liu, Y., Jiang, H., Zhang, Y., Han, Z., Ren, L.: Biomimetic super hydrophobic structured graphene on stainless steel surface by laser processing and transfer technology. Surf. Coat. Technol. 328, 152–160 (2017). https://doi.org/10.1016/j.surfcoat.2017.08.031CrossRef

Takeda, S., Fukawa, M., Hayashi, Y., Matsumoto, K.: Surface OH group governing adsorption properties of metal oxide films. Thin Solid Films 339, 220–224 (1999). https://doi.org/10.1016/S0040-6090(98)01152-3ADSCrossRef

Veiko, V.P., Slobodov, A.A., Odintsova, G.V.: Availability of methods of chemical thermodynamics and kinetics for the analysis of chemical transformations on metal surfaces under pulsed laser action. Laser Phys. 23, 066001 (2013). https://doi.org/10.1088/1054-660X/23/6/066001ADSCrossRef

Wennerberg, A., Svanborg, L.M., Berner, S., Berner, S., Andersson, M.: Spontaneously formed nanostructures on titanium surfaces. Clin. Oral Implants Res. 24, 203–209 (2013). https://doi.org/10.1111/j.1600-0501.2012.02429.xCrossRef

Wenzel, R.N.: Resistance of solid surfaces to wetting by water. Ind. Eng. Chem. 28, 988–994 (1936). https://doi.org/10.1021/ie50320a024CrossRef

Wyman, P.: Hydrophilic coatings for biomedical applications in and ex vivo. In: Coatings for Biomedical Applications, pp. 3–42 (2012). https://doi.org/10.1533/9780857093677.1.3

Yang, Z., Liu, X., Tian, Y.: Fabrication of super-hydrophobic nickel film on copper substrate with improved corrosion inhibition by electrodeposition process. Colloids Surf. A Physicochem. Eng. Asp. 560, 205–212 (2019). https://doi.org/10.1016/j.colsurfa.2018.10.024CrossRef

Titel: Wetting angle stability of steel surface structures after laser treatment
verfasst von: N. Shchedrina
Y. Karlagina
T. E. Itina
A. Ramos
D. Correa
A. Tokmacheva-Kolobova
S. Manokhin
D. Lutoshina
R. Yatsuk
I. Krylach
G. Odintsova
Publikationsdatum: 01.03.2020
Verlag: Springer US
Erschienen in: Optical and Quantum Electronics / Ausgabe 3/2020
Print ISSN: 0306-8919
Elektronische ISSN: 1572-817X
DOI: https://doi.org/10.1007/s11082-020-02280-1

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 3/2020

Photonic generation of millimeter-wave signal through frequency 12-tupling using two cascaded dual-parallel polarization modulators

Investigation of the thermal annealing effect on the optical, thermal and electrical properties of Sn2Sb2S5 evaporated thin films

Highly sensitive magnetic field sensor based on mode coupling effect in microstructured optical fibers

Employment of cascaded coupled resonators for resolution enhancement in plasmonic refractive index sensors

Optical design for the lens depth of a periscope-type 3 × zoom lens with 8-megapixel mobile phone

MBE growth of high quality AlInSb/GaSb compound buffer layers on GaAs substrates