Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Strength of Materials
Erschienen in: Strength of Materials 2/2016

01.03.2016

Mechanical Behavior of TiN/TiC-n Multilayer Coatings and Ti(C,N) Multicomponent Coatings Produced by PACVD

verfasst von: M. Azadi, A. S. Rouhaghdam, S. Ahangarani

Erschienen in: Strength of Materials | Ausgabe 2/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Mechanical properties of multilayer and multicomponent coatings were investigated in this paper. Titanium nitride/titanium carbide (TiN/TiC-n) multilayer and Ti(C,N) multicomponent coatings were prepared on the surface of AISI H13 hot work tool steel by the pulsed-DC plasma assisted chemical vapor deposition (PACVD). The microhardness, the toughness, the wear loss, and the friction coefficient were examined by Vickers hardness test and the pin-on-disk wear test. The optical microscopy was also used to examine worn surfaces and to characterize wear mechanisms. The results obtaiond show that multilayer coatings of TiN/TiC-10 have the lowest friction coefficient (as 0.2) and wear loss, the highest toughness (as 17. 7 MPa∙m 1/2 ) and microhardness (as 3150 VHN) among those values for multicomponent Ti(C,N) coatings and other multilayer coatings.
Vorheriger Artikel Fatigue of VT1-0 Titanium Alloy with Vacuum-Plasma Coating Under a Plane Stress State
Nächster Artikel Prediction of the Mechanical Properties of LaB6–ZrB2 Materials in View of the Effect of Their Intercomponent Boundaries

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
L. Dobrzañski, K. Goùombek, J. Mikuùa, and D. Pakuùa, “Multilayer and gradient PVD coatings on the sintered tool materials,” J. Achiev. Mater. Manuf. Eng., 31, No. 2, 170–190 (2008).
2.
F. Kustas, B. Mishra, and J. Zhou, “Fabrication and characterization of TiB2/TiC and tungsten co-sputtered wear coatings,” Surf. Coat. Technol., 153, 25–30 (2002).CrossRef
3.
E. Pagounis, V. K. Lindroos, “Development and performance of new hard and wear-resistant engineering materials,” J. Mater. Eng. Perform., 6, 749–756 (1997).CrossRef
4.
M. Azadi, A. S. Rouhaghdam, and S. Ahangarani, “Properties of TiC coating by pulsed DC PACVD,” J. Coat., 2013, 1–5 (2013), Article ID 712812.
5.
C. R. Chen, J. Pascual, F. D. Fischer, et al., “Prediction of the fracture toughness of a ceramic multilayer composite – Modeling and experiments,” Acta Mater., 55, 409– 421 (2007).CrossRef
6.
A. Roman, D. Chicot, and J. Lesage, “Indentation tests to determine the fracture toughness of nickel phosphorus coatings,” Surf. Coat. Technol., 155, 161–168 (2002).CrossRef
7.
A. Devia, V. Benavides, E. Restrepo, et al., “Influence substrate temperature on structural properties of TiN/TiC bilayers produced by pulsed arc techniques,” Vacuum, 81, 378–384 (2006).CrossRef
8.
L. Zhang, H. Yang, X. Pang, et al., “TiN-coating effects on stainless steel tribological behavior under dry and lubricated conditions,” J. Mater. Eng. Perform., 23, 1263– 1269 (2014).CrossRef
9.
D. Kim, Y. Cho, M. Lee, et al., “Properties of TiN–TiC multilayer coatings using plasma-assisted chemical vapor deposition,” Surf. Coat. Technol., 116–119, 906–910 (1999).CrossRef
10.
A. Shanaghi, A. S. Rouhaghdam, S. Ahangarani, and P. K. Chu, “Effect of plasma CVD operating temperature on nanomechanical properties of TiC nanostructured coating investigated by atomic force microscopy,” Mater. Res. Bull., 47, 2200–2205 (2012).CrossRef
11.
H. L. Wang, J. L. He, and M. H. Hon, “Sliding wear resistance of TiCN coatings on tool steel made by plasma-enhanced chemical vapour deposition,” Wear, 169, 195–200 (1993).CrossRef
12.
M. Takahashi and S. Shimada, “Preparation of composite and compositionally graded TiC–TiN films by liquid injection plasma-enhanced CVD,” Solid State Ionics, 172, 249–252 (2004).CrossRef
13.
S. K. Kim, T. H. Kim, J. Whöle, and K.-T. Rie, “TiCN coatings on aluminum alloy formed by MO-PACVD,” Surf. Coat. Technol., 131, 121–126 (2000).CrossRef
14.
Y. He, I. Apachitei, J. Zhou, et al., “Effect of prior plasma nitriding applied to a hot-work tool steel on the scratch-resistant properties of PACVD TiBN and TiCN coatings,” Surf. Coat. Technol., 201, No. 6, 2534–2539 (2006).CrossRef
15.
Y. He, I. Apachitei, J. Zhou, et al., “The influence of the depth of a plasma nitrided layer in tool-steel substrate on the scratch-resistant properties of PACVD TiBN coating,” Surf. Coat. Technol., 201, No. 16–17, 7036–7042 (2006).
16.
I. Dörfel, W. Österle, I. Urban, et al., “Microstructural characterization of binary and ternary hard coating systems for wear protection. Part II: Ti(CN) PACVD coatings,” Surf. Coat. Technol., 116–119, 898–905 (1999).CrossRef
17.
S. Ma, K. Xu, and W. Jie, “Plasma nitrided and TiCN coated AISI H13 steel by pulsed dc PECVD and its application for hot-working dies,” Surf. Coat. Technol., 191, 201–205 (2005).CrossRef
18.
W. Feng, H. Zhou, and S. Yang, “Nano-indentation and wear-resistance behaviors of TiCN films by pulsed plasma on cemented carbide cutting tool,” Mater. Sci. Eng. A, 527, 4767–4770 (2010).CrossRef
19.
Y. L. Su and W. H. Kao, “Tribological behavior and wear mechanisms of TiN/TiCN/TiN multilayer coatings,” J. Mater. Eng. Perform., 7, 601–612 (1998).CrossRef
20.
C. Y. H. Lim, S. C. Lim, and K. S. Lee, “Wear of TiC-coated carbide tools in dry turning,” Wear, 225–229, 354–367 (1999).CrossRef
21.
M. Azadi, A. S. Rouhaghdam, S. Ahangarani, and H. H. Mofidi, “Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel,” Surf. Coat. Technol., 245, 156–166 (2014).CrossRef
22.
M. S. Mahdipoor, F. Mahboubi, S. Ahangarani, et al., “The influence of plasma nitriding pre-treatment on tribological properties of TiN coatings deposited by PACVD,” J. Mater. Eng. Perform., 21, 958–964 (2012).
23.
A. S. Korhonen and E. Harju, “Surface engineering with light alloys – Hard coatings, thin films, and plasma nitriding,” J. Mater. Eng. Perform., 9, 302–305 (2000).CrossRef
24.
M. Azadi, A. S. Rouhaghdam, S. Ahangarani, et al., “Mechanical behavior and properties of TiN/TiC coating using PACVD,” Adv. Mater. Res., 829, 476–482 (2014).CrossRef
25.
M. Azadi, A. S. Rouhaghdam, S. Ahangarani, et al., “Effect of number of layers on the toughness of TiN/TiC multilayer coatings,” Int. J. Microstruct. Mater. Prop., 9, 500–515 (2014).
26.
Y. Zhao, G. Lin, J. Xiao, et al., “TiN/TiC multilayer films deposited by pulse biased arc ion plating,” Vacuum, 85, 1–4 (2010).CrossRef
27.
R. Venkataraman and R. Krishnamurthy, “Evaluation of fracture toughness of as plasma sprayed alumina–13 wt.% titania coatings by micro-indentation techniques,” J. Eur. Ceram. Soc., 26, 3075–3081 (2006).CrossRef
28.
D. Nolan, V. Leskovsek, M. Jenko, “Estimation of fracture toughness of nitride compound layers on tool steel by application of the Vickers indentation method,” Surf. Coat. Technol., 201, 182–188 (2006).CrossRef
29.
C. Liu, K. Liu, H. Yan, et al., “Mechanical properties of TiN/NbN multilayered films prepared by PVD coating,” Adv. Ceram. Sci. Eng., 2, 16–22 (2013).
30.
T. A. Rawdanowicz, V. Godbole, J. Narayan, et al., “The hardnesses and elastic moduli of pulsed laser deposited multilayer AlN/TiN thin films,” Composites Part B: Eng., 30, 657–665 (1999).CrossRef
31.
A. Kumar, H. L. Chan, and N. B. Dahotre, “Structural and hardness studies of CNX/TiN composite coatings on Si (100) substrates by laser ablation method,” J. Mater. Eng. Perform., 6, 583–585 (1997).CrossRef
32.
C. A. Freyman and Y. W. Chung, “Synthesis and characterization of hardness-enhanced multilayer oxide films for high-temperature applications,” Surf. Coat. Technol., 202, 4702–4708 (2008).CrossRef
33.
P. C. Yashar and W. D. Sproul, “Nanometer scale multilayered hard coatings,” Vacuum, 55, 179–190 (1999).CrossRef
34.
J. Gong, “Determining indentation toughness by incorporating true hardness into fracture mechanics equations,” J. Eur. Ceram. Soc., 19, 1585–1592 (1999).CrossRef
35.
H. Holleck, “Material selection for hard coatings,” J. Vac. Sci. Technol. A, 4, No. 6, 2661–2669 (1988).CrossRef
36.
K. Holmberg, A. Matthews, and H. Ronkainen, “Coatings tribology – contact mechanics and surface design,” Tribol. Int., 31, 107–120 (1998).CrossRef
37.
J. Lee, K. Euh, J. C. Oh, and S. Lee, “Microstructure and hardness improvement of TiC/stainless steel surface composites fabricated by high-energy electron beam irradiation,” Mater. Sci. Eng. A, 323, 251–259 (2002).CrossRef
38.
J. Pirso, M. Viljus, and S. Letunovits, “Sliding wear of TiC–NiMo cermets,” Tribol. Int., 37, 817–824 (2004).CrossRef
39.
Y. Y. Guu, J. F. Lin, and C. Ai, “The tribological characteristics of titanium nitride coatings. Part I. Coating thickness effects,” Wear, 194, 12–21 (1996).CrossRef
40.
Y. M. Zhou, R. Asaki, K. Higashi, et al., “Sliding wear behavior of polycrystalline TiN/CrN multilayers against an alumina ball,” Surf. Coat. Technol., 130, 9–14 (2000).CrossRef
41.
A. K. Keshri, V. Singh, J. Huang, et al., “Intermediate temperature tribological behavior of carbon nanotube reinforced plasma sprayed aluminum oxide coating,” Surf. Coat. Technol., 204, 1847–1855 (2010).CrossRef
42.
J. Deng, T. Cao, and L. Liu, “Self-lubricating behaviors of Al2O3/TiB2 ceramic tools in dry high-speed machining of hardened steel,” J. Eur. Ceram. Soc., 25, 1073–1079 (2005).CrossRef
43.
Z. Tong, C. Ding, and D. Yan, “A fracture model for wear mechanism in plasma sprayed ceramic coating materials,” Wear, 155, 309–316 (1992).CrossRef
44.
A. J. Lockwood, S. Banfield, A. Leylandand, and B. J. Inkson, “Continuum roughness measurements of a TiN coating during dynamic in-situ wear inside a transmission electron microscope,” in: Proc. EMC2012, Manchester, UK (2012).
45.
M. Scholl, “Abrasive wear of titanium nitride coatings,” Wear, 203–204, 57–64 (1997).CrossRef
46.
E. Martinez, U. Wiklund, J. Esteve, et al., “Tribological performance of TiN supported molybdenum and tantalum carbide coatings in abrasion and sliding contact,” Wear, 253, 1182–1187 (2002).CrossRef
47.
M. Bao, X. Xu, H. Zhang, et al., “Tribological behavior at elevated temperature of multilayer TiCN/TiC/TiN hard coatings produced by chemical vapor deposition,” Thin Solid Films, 520, 833–836 (2011).CrossRef
48.
A. Forn, J. A. Pacas, G. G. Fuentes, and E. Elizalde, “Mechanical and tribological properties of TiCxN1–x wear resistant coatings,” Int. J. Refract. Met. Hard Mater., 19, 507–513 (2001).CrossRef
49.
C. Jarms, H. R. Stock, H. Berndt, et al., “Influence of the PACVD process parameters on the properties of titanium carbide thin films,” Surf. Coat. Technol., 98, 1547–1552 (1998).CrossRef
50.
B. Warcholinski, A. Gilewicz, and P. Myslinski, “Tribological properties of TiAICrN thin films,” Rev. Adv. Mater. Sci., 22, 81–88 (2009).
51.
S. Novak, M. Kalin, P. Lukas, et al., “The effect of residual stresses in functionally graded alumina–ZTA composites on their wear and friction behaviour,” J. Eur. Ceram. Soc., 27, 151–156 (2007).CrossRef
Metadaten
Titel
Mechanical Behavior of TiN/TiC-n Multilayer Coatings and Ti(C,N) Multicomponent Coatings Produced by PACVD
verfasst von
M. Azadi
A. S. Rouhaghdam
S. Ahangarani
Publikationsdatum
01.03.2016
Verlag
Springer US
Erschienen in
Strength of Materials / Ausgabe 2/2016
Print ISSN: 0039-2316
Elektronische ISSN: 1573-9325
DOI
https://doi.org/10.1007/s11223-016-9763-2

Weitere Artikel der Ausgabe 2/2016

Strength of Materials 2/2016 Zur Ausgabe

OriginalPaper

Prediction of the Mechanical Properties of LaB6–ZrB2 Materials in View of the Effect of Their Intercomponent Boundaries

OriginalPaper

Disturbance Due to Thermomechanical Sources in Porothermoelastic Medium

OriginalPaper

Amplitude Characteristics of Inelasticity Distribution in Steel Kh18n10t Under High-Cycle Loading

SCIENTIFIC AND TECHNICAL SECTION

Vibrodiagnostic Parameters of the Presence of a Semielliptic Breathing Crack in Circular Bars Under Super- and Subharmonic Resonances

OriginalPaper

Tensile Fracture Analysis of Key-Hole Notches by Means of the Strain Energy Density

OriginalPaper

Fatigue of VT1-0 Titanium Alloy with Vacuum-Plasma Coating Under a Plane Stress State

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise