Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Shape Memory and Superelasticity
Erschienen in: Shape Memory and Superelasticity 4/2021

10.12.2021 | Review

Applying Full-Field Measurement Techniques for the Thermomechanical Characterization of Shape Memory Alloys: A Review and Classification

verfasst von: D. Delpueyo, A. Jury, X. Balandraud, M. Grédiac

Erschienen in: Shape Memory and Superelasticity | Ausgabe 4/2021

Einloggen, um Zugang zu erhalten

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Full-field measurement techniques are now mature. As such, they have profoundly impacted the experimental mechanics community in recent years. The way that shape memory alloys (SMAs) are now tested is not spare from this deep-rooted trend, as reflected by the increasing number of papers published in the SMA literature. In this context, the aim of this contribution is to give an overview of the use of full-field measuring techniques for SMA characterization purposes. We recall first the basic principle of one volume and four surface techniques employed in this community. Several typical papers where such techniques are employed are then presented, by highlighting in each case the extent to which the thermomechanical response of SMAs could be better understood and modeled thanks to these techniques. A classification by several criteria of about 300 references is finally offered and discussed. The main criteria are the type of SMA, the type of technique employed to perform the measurements, and the type of test.

Graphical Abstract

Vorheriger Artikel Cardiovascular Implant Durability Conference (CVID) Rescheduled to April
Nächster Artikel Effect of Ni/Ti Ratio and Ta Content on NiTiTa Alloys
Fußnoten
1
Web of Science is an online subscription-based scientific citation indexing service managed by Clarivate Analytics, and originally produced by Thomson Scientific’s Institute for Scientific Information (ISI), a division of Thomson Reuters.
 
Literatur
1.
Pierron F, Grédiac M (2021) Towards Material Testing 2.0. A review of test design for identification of constitutive parameters from full-field measurements. Strain 57:e12370
2.
Roux S, Besnard G, Hild F (2006) Finite-element displacement fields analysis from digital images: application to Portevin-Le Châtelier bands. Exp Mech 46:789–803
3.
Pan B, Qian K, Xie H, Asundi A (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol 20:062001
4.
Wittevrongel L, Lava P, Lomov SV, Debruyne D (2015) A self adaptive global digital image correlation algorithm. Exp Mech 55:361–378
5.
Kammers A, Daly S (2011) Small-scale patterning methods for digital image correlation under scanning electron microscopy. Meas Sci Technol 22:125501
6.
Kammers A, Daly S (2013) Digital image correlation under scanning electron microscopy: methodology and validation. Exp Mech 53:1743–1761
7.
Kammers A, Daly S (2013) Self-assembled nanoparticle surface patterning for improved digital image correlation in a scanning electron microscope. Exp Mech 53:1333–1341
8.
Weidner A, Biermann H (2021) Review on strain localization phenomena studied by high-resolution digital image correlation. Adv Eng Mater 23:2001409
9.
Grédiac M, Blaysat B, Sur F (2017) A critical comparison of some metrological parameters characterizing local Digital Image Correlation and Grid Method. Exp Mech 57:871–903
10.
Grédiac M, Sur F, Blaysat B (2020) Comparing several spectral methods used to extract displacement and strain fields from checkerboard images. Opt Lasers Eng 127:105984
11.
Reu PL, Blaysat B, Ando E, Bhattacharya K, Couture C, Couty V, Deb D, Fayad SS, Iadicola MA, Jaminion S, Klein M, Landauer AK, Lava P, Liu M, Luan LK, Olufsen SN, Réthoré J, Roubin E, Seidl DT, Siebert T, Stamati O, Toussaint E, Turner D, Vemulapati CSR, Weikert T, Witz JF, Witzel O, Yang J (2022) DIC challenge 2.0: developing images and guidelines for evaluating accuracy and resolution of 2D analyses. Focus on the metrological efficiency indicator. Exp Mech (accepted, in press). https://​doi.​org/​10.​1007/​s11340-021-00806-6
12.
Sutton M, Orteu J, Schreier H (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer, New York
13.
Bomarito G, Hochhalter J, Ruggles T, Cannon A (2017) Increasing accuracy and precision of digital image correlation through pattern optimization. Opt Lasers Eng 91:73–85
14.
Fayad S, Seidl D, Reu P (2020) Spatial DIC errors due to pattern-induced bias and grey level discretization. Exp Mech 60:249–263
15.
16.
Grédiac M, Blaysat B, Sur F (2019) Extracting displacement and strain fields from checker-board images with the localized spectrum analysis. Exp Mech 59:207–218
17.
Grédiac M, Blaysat B, Sur F (2020) On the optimal pattern for displacement field measurement: random speckle and DIC, or checkerboard and LSA? Exp Mech 60:509–534
18.
Grédiac M, Sur F, Blaysat B (2016) Removing quasi-periodic noise in strain maps by filtering in the Fourier domain. Exp Tech 40:959–971
19.
Mirmohammad H, Kingstedt O (2021) Theoretical considerations for transitioning the grid method technique to the microscale. Exp Mech 61:753–770
20.
Piro J, Grédiac M (2004) Producing and transferring low-spatial-frequency grids for measuring displacement fields with moiré and grid methods. Exp Tech 28:23–26
21.
Surrel Y (2003) Images optiques; mesures 2D et 3D. Conservatoire National des Arts et Métiers, Paris
22.
Post D, Han B, Ifju P (1994) High sensitivity moiré. Experimental analysis for mechanical and materials. Springer, New York
23.
Surrel Y (2005) Les techniques optiques de mesure de champ: essai de classification. Instr Mes Metrol 5:1–2
24.
Jacquot P (2008) Speckle interferometry: a review of the principal methods in use for experimental mechanics applications. Strain 44:57–69
25.
Asundi A (1989) Moiré interferometry for deformation measurement. Opt Lasers Eng 11:281–292
26.
Vollmer M, Mollman K (2018) Infrared thermal imaging: fundamentals, research and applications, 2nd edn. Wiley, Hoboken
27.
Batsale J, Chrysochoos A, Pron H, Wattrisse B (2012) Thermographic analysis of material behavior. In: Grédiac M, Hild F (eds) Full-field measurements and identification in solid mechanics, vol 16. Wiley, Hoboken, pp 439–468
28.
Jing Y, Laurent F, Stéphane A, Alain N (2016) A numerical study of heat source reconstruction for the advection diffusion operator: a conjugate gradient method stabilized with SVD. Int J Therm Sci 104:68–85
29.
Chrysochoos A, Louche H (2000) An infrared image processing to analyse the calorific effects accompanying strain localisation. Int J Eng Sci 38:1759–1788
30.
Poulsen H, Lauridsen SNE, Schmidt S, Suter R, Lienert U, Margulies L, Lorentzen T, Jensen D (2001) Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders. J Appl Crystallogr 34:751–756
31.
Korsunsky A, Vorster W, Zhang S, Dini D, Latham D, Golshan M, Liu J, Kyriakoglou Y, Walsh M (2006) The principle of strain reconstruction tomography: determination of quench strain distribution from diffraction measurements. Acta Mater 54:2101–2108
32.
Hayashi Y, Hirose Y, Seno Y (2015) Polycrystal orientation mapping using scanning three-dimensional X-ray diffraction microscopy. J Appl Crystallogr 48:1094–1101
33.
Hektor J, Hall S, Henningsson N, Engqvist J, Ristinmaa M, Lenrick F, Wright J (2019) Scanning 3DXRD measurement of grain growth, stress, and formation of Cu6Sn5 around a Tin Whisker during heat treatment. Materials 12:446
34.
Henningsson N, Hall S, Wright J, Hektor J (2020) Reconstructing intragranular strain fields in polycrystalline materials from scanning 3DXRD data. J Appl Crystallogr 53:314–325
35.
Sedmák P, Pilch J, Heller L, Kopeček J, Wright J, Sedlák P, Frost M, Šittner P (2016) Grain-resolved analysis of localized deformation in nickel-titanium wire under tensile load. Science 353:559–562
36.
Reedlunn B, Daly S, Hector L, Zavattieri P, Shaw J (2013) Tips and tricks for characterizing shape memory wire part 5: full-field strain measurement by digital image correlation. Exp Tech 37:62–78
37.
Jury A, Balandraud X, Heller L, Šittner P, Karlik M (2021) Reconstruction of heat sources induced in superelastically loaded Ni–Ti wire by localized deformation processes. Exp Mech 61:349–366
38.
Reedlunn B, Churchill CB, Nelson EE, Shaw JA, Daly SH (2014) Tension, compression, and bending of superelastic shape memory alloy tubes. J Mech Phys Solids 63:506–537
39.
Xiao Y, Zeng P, Lei L, Du H (2015) Local mechanical response of superelastic NiTi shape-memory alloy under uniaxial loading. Shap Mem Superelasticity 1:468–478
40.
Delpueyo D, Grédiac M, Balandraud X, Badulescu C (2012) Investigation of martensitic microstructures in a monocrystalline Cu–Al–Be shape memory alloy with the grid method and infrared thermography. Mech Mater 45:34–51
41.
Polatidis E, Smid M, Kubena I, Hsu W, Laplanche G, Van Swygenhoven H (2020) Deformation mechanisms in a superelastic NiTi alloy: an in-situ high resolution digital image correlation study. Mater Des 191:108622
42.
Zhang X, Xu T, Sun Q, Tong P (1997) On the full-field deformation of single crystal CuAlNi shape memory alloys stress-induced beta(1)->gamma’(1) martensitic transformation. J Phys IV 7:555–560
43.
Louche H, Schlosser P, Favier D, Orgéas L (2012) Heat source processing for localized deformation with non-constant thermal conductivity. application to superelastic tensile tests of NiTi shape memory alloys. Exp Mech 52:1313–1328
44.
Murasawa G, Yoneyama S, Tohgo K, Takashi M (2004) Distribution of unique performances for shape memory alloy composite. In: Lee S, Yoon D, Lee J, Lee S (eds) Advances in nondestructive evaluation, PT 1–3. Key engineering materials, vol 270–273. Trans Tech Publications Ltd, Zurich, pp 2172–2178
45.
Murasawa G (2005) Analytical model for predicting internal stress and deformation of shape memory alloy composite. In: Armstrong W (ed) Smart structures and materials 2005: active materials: behavior and mechanics, vol 5761. International Society for Optics and Photonics, Bellingham, pp 395–405
46.
Shaw J, Kyriakides S (1997) On the nucleation and propagation of phase transformation fronts in a NiTi alloy. Acta Mater 45:683–700
47.
Tobushi H, Nakahara T, Shimeno Y, Hashimoto T (1999) Low-cycle fatigue of TiNi shape memory alloy and formulation of fatigue life. ASME J Eng Mater Technol 122:186–191
48.
Balandraud X, Chrysochoos A, Leclercq S, Peyroux R (2001) Influence of the thermomechanical coupling on the propagation of a phase change front. C R Acad Sci—Ser IIb—Mech 329:621–626
49.
Helm D, Haupt P (2001) Thermomechanical behavior of shape memory alloys. In: Lynch C (ed) Smart structures and materials 2001: active materials: behavior and mechanics, vol 4333. International Society for Optics and Photonics, Bellingham, pp 302–313
50.
Iadicola M, Shaw JA (2002) The effect of uniaxial cyclic deformation on the evolution of phase transformation fronts in pseudoelastic NiTi wire. J Intell Mater Syst Struct 13:143–155
51.
Gadaj S, Nowacki W, Pieczyska E (2002) Temperature evolution in deformed shape memory alloy. Infrared Phys Technol 43:151–155
52.
Iadicola M, Shaw J (2002) An experimental setup for measuring unstable thermo-mechanical behavior of shape memory alloy wire. J Intell Mater Syst Struct 13:157–166
53.
Lu R, Fang R (2002) Compressive response of CuAlNi single crystal. In: Shen G, Cha S, Chiang F, Mercer C (eds) Optical technology and image processing for fluids and solids diagnostics 2002, vol 5058. International Society for Optics and Photonics, Bellingham, pp 633–637
54.
Ng Y, Song C, McLean D, Shimi SM, Frank TG, Cuschieri A, Campbell PA (2003) Optimized deployment of heat-activated surgical staples using thermography. Appl Phys Lett 83:1884–1886
55.
Iadicola M, Shaw J (2004) Rate and thermal sensitivities of unstable transformation behavior in a shape memory alloy. Int J Plast 20:577–605
56.
Turner T, Buehrle R, Cano R, Flemings G (2004) Design, fabrication, and testing of SMA enabled adaptive chevrons for jet noise reduction. In: Flatau A (ed) Smart structures and materials 2004: smart structures and integrated systems, vol 5390. International Society for Optics and Photonics, Bellingham, pp 297–308
57.
Gadaj S, Nowacki W, Pieczyska E, Tobushi H (2005) Temperature measurement as a new technique applied to the phase transformation study in a TiNi shape memory alloy subjected to tension. Arch Metall Mater 50:661–674
58.
Chrysochoos A, Licht C, Peyroux R (2005) Propagation of phase change front in monocrys-talline SMA. In: Fremond M, Marceri F (eds) Mechanical modelling and computational issues in civil engineering, vol 23. Springer, Berlin, Heidelberg, pp 369–377
59.
Chang B, Shaw J, Iadicola M (2006) Thermodynamics of shape memory alloy wire: modeling, experiments, and application. Continuum Mech Thermodyn 18:83–118
60.
Pieczyska EA, Gadaj SP, Nowacki WK, Tobushi H (2006) Phase-transformation fronts evolution for stress- and strain-controlled tension tests in TiNi shape memory alloy. Exp Mech 46:531–542
61.
Pieczyska EA, Tobushi H, Gadaj S, Nowacki W (2006) Superelastic deformation behaviors based on phase transformation bands in TiNi shape memory alloy. Mater Trans 47:670–676
62.
Vieille B, Michel J, Boubakar M, Lexcellent C (2007) Validation of a 3D numerical model of shape memory alloys pseudoelasticity through tensile and bulging tests on CuAlBe sheets. Int J Mech Sci 49:280–297
63.
Seiner H, Landa M, Sedlák P (2007) Propagation of an austenite-martensite interface in a thermal gradient. Proc Est Acad Sci Phys Math 56:218–225
64.
Favier D, Louche H, Schlosser P, Orgéas L, Vacher P, Debove L (2007) Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti-50.8at.% Ni thin tube under tension. Investigation via temperature and strain fields measurements. Acta Mater 55:5310–5322
65.
Schlosser P, Louche H, Favier D, Orgéas L (2007) Image processing to estimate the heat sources related to phase transformations during tensile test of NiTi tubes. Strain 43:260–271
66.
Iadicola MA, Shaw JA (2007) An experimental method to measure initiation events during unstable stress-induced martensitic transformation in a shape memory alloy wire. Smart Mater Struct 16:S155–S169
67.
Gollerthan S, Young M, Neuking K, Ramamurty U, Eggeler G (2009) Direct physical evidence for the back-transformation of stress-induced martensite in the vicinity of cracks in pseudoelastic NiTi shape memory alloys. Acta Mater 57:5892–5897
68.
Churchill CB, Shaw JA, Iadicola MA (2009) Tips and tricks for characterizing shape memory alloy wire: Part 3-localization and propagation phenomena. Exp Tech 33:70–78
69.
Grolleau V, Louche H, Penin A, Chauvelon P, Rio G, Liu Y, Favier D (2009) Bulge tests on ferroelastic and superelastic NiTi sheets with full field thermal and 3D-kinematical measurements: experiments and modelling. In: Sittner P, Paidar V, Heller L, Seiner H (eds) ESOMAT 2009–8th European symposium on martensitic transformations. EDP Sciences, Les Ulis
70.
Schlosser P, Favier D, Louche H, Orgéas L, Liu Y (2009) From the thermal and kinematical full-field measurements to the analysis of deformation mechanisms of NiTi SMAs. In: Sittner P, Paidar V, Heller L, Seiner H (eds) ESOMAT 2009–8th European symposium on martensitic transformations. EDP Sciences, Les Ulis
71.
Pieczyska E, Gadaj S, Luckner J, Nowacki W, Tobushi H (2009) Martensite and reverse transformation during complete cycle of simple shear of NiTi shape memory alloy. Strain 45:93–100
72.
Vigneron S, Chrysochoos A, Peyroux R, Wattrisse B (2009) Analyse énergétique de la localisation du changement de phase dans un AMF monocristallin. Congrès Français de Mécanique, 24–28 August 2009, Marseille, France
73.
Churchill CB, Shaw JA, Iadicola MA (2010) Tips and tricks for characterizing shape memory alloy wire: Part 4—thermo-mechanical coupling. Exp Tech 34:63–80
74.
Pieczyska E, Tobushi H (2010) Infrared imaging of TiNi shape memory alloy subjected to deformation at various temperatures. In: Bremand F (ed) ICEM 14: 14th international conference on experimental mechanics, vol 6. EDP Sciences, Les Ulis
75.
Saletti D, Pattofatto S, Zhao H (2010) Evolution of the martensitic transformation in shape memory alloys under high strain rates. In: Bremand F (ed) ICEM 14: 14th international conference on experimental mechanics, vol 6. EDP Sciences, Les Ulis
76.
Kim K, Juggernauth K, Daly S (2010) Stress-induced martensitic phase transformation in nitinol under hard cyclic loading. ASME 2010 conference on smart materials, adaptive structures and intelligent systems. Vol. 1. Smart materials, adaptive structures and intelligent systems. AMSE, Orlando, pp 1–7
77.
Delpueyo D, Balandraud X, Grédiac M, Fillit R (2010) Thermoelastic analysis of a copper-based monocristalline shape-memory alloy. In: Bremand F (ed) ICEM 14: 14th international conference on experimental mechanics, vol 6. EDP Sciences, Les Ulis
78.
Zhang X, Feng P, He Y, Yu T, Sun Q (2010) Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips. Int J Mech Sci 52:1660–1670
79.
Maynadier A, Poncelet M, Lavernhe-Taillard K, Roux S (2010) One-shot thermal and kinematic field measurements: infra-red image correlation. In: Bremand F (ed) ICEM 14: 14th international conference on experimental mechanics, vol 6. EDP Sciences, Les Ulis
80.
Pieczyska E (2010) Activity of stress-induced martensite transformation in TiNi shape memory alloy studied by infrared technique. J Mod Opt 57:1700–1707
81.
Vives E, Burrows S, Edwards RS, Dixon S, Mañosa L, Planes A, Romero R (2011) Temperature contour maps at the strain-induced martensitic transition of a Cu–Zn–Al shape—memory single crystal. Appl Phys Lett 98:011902
82.
Kim K, Daly S (2011) Martensite strain memory in the shape memory alloy nickel-titanium under mechanical cycling. Exp Mech 51:641–652
83.
Pieczyska E, Dutkiewiczf J, Masdeu F, Luckner J, Maciak R (2011) Investigation of thermomechanical properties of ferromagnetic NiFeGa shape memory alloy subjected to pseudoelastic compression test. Arch Metall Mater 56:401–408
84.
Delpueyo D, Balandraud X, Grédiac M (2011) Applying infrared thermography to analyse martensitic microstructures in a Cu–Al–Be shape-memory alloy subjected to a cyclic loading. Mater Sci Eng A 528:8249–8258
85.
Takeda K, Tobushi H, Miyamoto K, Pieczyska EA (2012) Superelastic deformation of TiNi shape memory alloy subjected to various subloop loadings. Mater Trans 53:217–223
86.
Pieczyska EA, Tobushi H, Takeda K, Stró D (2012) Martensite transformation bands studied in TiNi shape memory alloy by infrared and acoustic emission techniques. Kovove Mater 50:309–318
87.
Dunand-Chatellet C, Moumni Z (2012) Coupling Infrared thermography and acoustic emis sion measurement to quantify the shakedown state of shape memory alloys. In: Tonkovic Z, Aliabadi M (eds) Advances in fracture and damage mechanics X. Vol 488–489. Key engineering materials. Trans Tech Publications Ltd, Zurich, pp 146–149
88.
Bechtold C, Chluba C, De Miranda R, Quandt E (2012) High cyclic stability of the elastocaloric effect in sputtered TiNiCu shape memory films. Appl Phys Lett 101:091903
89.
Yan Y, Yin H, Sun QP, Huo Y (2012) Rate dependence of temperature fields and energy dissipations in non-static pseudoelasticity. Continuum Mech Thermodyn 24:675–695
90.
Pieczyska E, Tobushi H, Kulasinski K, Takeda K (2012) Thermomechanical coupling effects in TiNi SMA subjected to compression. Mater Trans 53:1905–1909
91.
Maynadier A, Poncelet M, Lavernhe-Taillard K, Roux S (2012) One-shot measurement of thermal and kinematic fields: infrared image correlation (IRIC). Exp Mech 52:241–255
92.
Cui J, Wu Y, Muehlbauer J, Hwang Y, Radermacherand R, Fackler S, Wuttig M, Takeuchi I (2012) Demonstration of high efficiency elastocaloric cooling with large delta T using NiTi wires. Appl Phys Lett 101:073904
93.
Reedlunn B, Daly S, Shaw J (2013) Superelastic shape memory alloy cables: Part I—isothermal tension experiments. Int J Solids Struct 50:3009–3026
94.
Reedlunn B, Daly S, Shaw J (2013) Superelastic shape memory alloy cables: Part II–sub-component isothermal responses. Int J Solids Struct 50:3027–3044
95.
Pieczyska E, Tobushi H, Kulasinski K (2013) Development of transformation bands in TiNi SMA for various stress and strain rates studied by a fast and sensitive infrared camera. Smart Mater Struct 22:035007
96.
Krevet B, Pinneker V, Rhode M, Bechthold C, Quandt E, Kohl M (2013) Evolution of temperature profiles during stress-induced transformation in NiTi thin films. In: Prokoshkin S, Resnina N (eds) European symposium on martensitic transformations. Vol. 738–739. Materials science forum. Trans Tech Publications Ltd, Zurich, pp 287–292
97.
Ossmer H, Chluba C, Krevet B, Quandt E, Rohde M, Kohl M (2013) Elastocaloric cooling using shape memory alloy films. 13th international conference on micro and nanotechnology for power generation and energy conversion applications (POWERMEMS 2013). Vol. 476. Journal of physics conference series. IOP Publishing Ltd, Bristol
98.
Du H, Zeng P, Zhao J, Lei L, Fang G, Qu T (2013) In situ multi-fields investigation on instability and transformation localization of martensitic phase transformation in NiTi alloys. Acta Metall Sin 49:17–25
99.
Saletti D, Pattofatto S, Zhao H (2013) Measurement of phase transformation properties under moderate impact tensile loading in a NiTi alloy. Mech Mater 65:1–11
100.
Cornell S, Hartl D, Lagoudas D (2014) Experimental validation of a shape memory alloy constitutive model by heterogeneous thermal loading using infrared thermography and digital image correlation. Proceedings of the ASME conference on smart materials adaptative structures and intelligent systems, vol 2. ASME, New York
101.
Yin H, He Y, Sun Q (2014) Effect of deformation frequency on temperature and stress oscillations in cyclic phase transition of NiTi shape memory alloy. J Mech Phys Solids 67:100–128
102.
Ossmer H, Lambrecht F, Gültig M, Chluba C, Quandt E, Kohl M (2014) Evolution of temperature profiles in TiNi films for elastocaloric cooling. Acta Mater 81:9–20
103.
Depriester D, Maynadier A, Lavernhe-Taillard K, Hubert O (2014) Thermomechanical modelling of a NiTi SMA sample submitted to displacement-controlled tensile test. Int J Solids Struct 51:1901–1922
104.
Ahadi A, Sun Q (2014) Effects of grain size on the rate-dependent thermomechanical responses of nanostructured superelastic NiTi. ACTA Mater 76:186–197
105.
Pieczyska E, Kowalczyk-Gajewska K, Maj M, Staszczak M, Tobushi H (2014) Thermo-mechanical Investigation of TiNi shape memory alloy and PU shape memory polymer subjected to cyclic loading. In: Guagliano M, Vergani L (eds) XVII international colloquium on mechanical fatigue of metals (ICMFM17) Vol. 74. Procedia engineering. Elsevier, Amsterdam, pp 287–292
106.
Daghash S, Ozbulut O, Sherif M (2014) Shape memory alloy cables for civil infrastructure systems. Proceedings of the ASME conference on smart materials adaptive structures and intelligent systems, vol 1. ASME, New York
107.
Maletta C, Bruno L, Corigliano P, Crupi V, Guglielmino E (2014) Crack-tip thermal and mechanical hysteresis in shape memory alloys under fatigue loading. Mater Sci Eng A 616:281–287
108.
Pelegrina J, Yawny A, Olbricht J, Eggeler G (2015) Transformation activity in ultrafine grained pseudoelastic NiTi wires during small amplitude loading/unloading experiments. J Alloys Compd 651:655–665
109.
Pieczyska EA (2015) Mechanical behavior and infrared imaging of ferromagnetic NiFeGaCo SMA single crystal subjected to subsequent compression cycles. Arch Metall Mater 50:585–590
110.
Delobelle V, Favier D, Louche H, Connesson N (2015) Determination of local thermo-physical properties and heat of transition from thermal fields measurement during drop calorimetric experiment. Exp Mech 55:711–723
111.
Pataky GJ, Ertekin E, Sehitoglu H (2015) Elastocaloric cooling potential of NiTi, Ni2FeGa, and CoNiAl. Acta Mater 96:420–427
112.
Xiao Y, Zeng P, Lei L, Du H (2015) Experimental investigation on rate dependence of thermomechanical response in superelastic NiTi shape memory alloy. J Mater Eng Perform 24:3755–3760
113.
Alarcon E, Heller L, Chirani S, Sittner P, Saint-Sulpice L, Calloch S (2015) Phase transformations and fatigue of NiTi. In: Schryvers N, Van Humbeeck J (eds) ESOMAT 2015, 10th European symposium on martensitic transformations, vol 33. EDP Sciences, Les Ulis
114.
Ossmer H, Chluba C, Gueltig M, Quandt E, Kohl M (2015) Local evolution of the elastocaloric effect in TiNi-based films. Shap Mem Superelasticity 1:142–152
115.
Schmidt M, Schutze A, Seelecke S (2015) Scientific test setup for investigation of Shape memory alloy based elastocaloric cooling processes. Int J Refrig 54:88–97
116.
Ossmer H, Miyazaki S, Kohl M (2015) The elastocaloric effect in TiNi-based foils. Materials today-proceedings, vol 2. Elsevier Science BV, Amsterdam, pp 971–974
117.
Tusek J, Engelbrecht K, Eriksen D, Dall’Olio S, Tusek J, Pryds N (2016) A regenerative elastocaloric heat pump. Nat Energy 1:16134
118.
Michalak M, Krucin I (2016) A smart fabric with increased insulating properties. Text Res J 86:97–111
119.
Ozbulut O, Daghash S, Sherif M (2016) Shape memory alloy cables for structural applica tions. J Mater Civil Eng 28:04015176
120.
Schmidt M, Ullrich J, Wieczorek A, Frenzel J, Eggeler G, Schütze A, Seelecke S (2016) Experimental methods for investigation of shape memory based elastocaloric cooling processes and model validation. J Vis Exp 111:53626
121.
Kan Q, Yu C, Kang G, Li J, Yan W (2016) Experimental observations on rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy. Mech Mater 97:48–58
122.
Xie X, Kan Q, Kang G, Li J, Qiu B, Yu C (2016) Observation on the transformation domains of super-elastic NiTi shape memory alloy and their evolutions during cyclic loading. Smart Mater Struct 25:045003
123.
Bechle NJ, Kyriakides S (2016) Evolution of phase transformation fronts and associated thermal effects in a NiTi tube under a biaxial stress state. Extrem Mech Lett 8:55–63
124.
Bruederlin F, Ossmer H, Wendler F, Miyazaki S, Kohl M (2017) SMA foil-based elastocaloric cooling: from material behavior to device engineering. J Phys D Appl Phys 50:424003
125.
Xia M, Sun Q (2017) Thermomechanical responses of nonlinear torsional vibration with NiTi shape memory alloy—alternative stable states and their jumps. J Mech Phys Solids 102:257–276
126.
Alarcon E, Heller L, Chirani SA, Sittner P, Kopecek J, Saint-Sulpice L, Calloch S (2017) Fatigue performance of superelastic NiTi near stress-induced martensitic transformation. Int J Fatigue 95:76–89
127.
You Y, Zhang Y, Moumni Z, Anlas G, Zhang W (2017) Effect of the thermomechanical coupling on fatigue crack propagation in NiTi shape memory alloys. Mater Sci Eng A 685:50–56
128.
Zhang Y, You Y, Moumni Z, Anlas G, Zhu J (2017) Experimental and theoretical investigation of the frequency effect on low cycle fatigue of shape memory alloys. Int J Plast 90:1–30
129.
Shen A, Zhao D, Sun W, Liu J, Li C (2017) Elastocaloric effect in a Co50Ni20Ga30 single crystal. Scr Mater 127:1–5
130.
Zhao D, Liu J, Chen X, Sun W, Li Y, Zhang M, Shao Y, Zhang H, Yan A (2017) Giant caloric effect of low-hysteresis metamagnetic shape memory alloys with exceptional cyclic functionality. Acta Mater 133:217–223
131.
Sun W, Liu J, Zhao D, Zhang M (2017) Directional solidification and elastocaloric effect in a Ni45Mn44Sn11 magnetic shape memory alloy. J Phys D Appl Phys 50:444001
132.
Pieczyska E, Kowalewski Z, Dunic V (2017) Stress relaxation effects in TiNi SMA during superelastic deformation: experiment and constitutive model. Shape Memory Superelasticity 3:392–402
133.
Xiao F, Chen H, Jin X, Nie Z, Kakeshita T, Fukuda T (2018) Stress-induced reverse martensitic transformation in a Ti-51Ni (at%) alloy aged under uniaxial stress. Sci Rep 8:6099
134.
Sharar D, Radice J, Warzoha R, Hanrahan B, Chang B (2018) First demonstration of a bending-mode elastocaloric cooling ‘Loop‘. Proceedings of the 17th IEEE Intersociety conference on thermal and thermomechanical phenomena in electronic systems (ITHERM 2018). IEEE, New York, pp 218–226
135.
Tusek J, Zerovnik A, Cebron M, Brojan M, Zuzek B, Engelbrecht K, Cadelli A (2018) Elastocaloric effect vs fatigue life: exploring the durability limits of Ni–Ti plates under pre-strain conditions for elastocaloric cooling. Acta Mater 150:295–307
136.
Yan K, Wei P, Ren F, He W, Sun Q (2019) Enhance fatigue resistance of nanocrystalline NiTi by laser shock peening. Shape Memory Superelasticity 5:436–443
137.
Fritsch E, Izadi M, Ghafoori E (2019) Development of nail-anchor strengthening system with iron-based shape memory alloy (Fe-SMA) strips. Constr Build Mater 229:117042
138.
Shen Y, Sun W, Wei Z, Shen Q, Zhang Y, Liu J (2019) Orientation dependent elastocaloric effect in directionally solidified Ni–Mn–Sn alloys. Scr Mater 163:14–18
139.
Wei Z, Sun W, Shen Q, Shen Y, Zhang Y, Liu E, Liu J (2019) Elastocaloric effect of all-d-metal Heusler NiMnTi(Co) magnetic shape memory alloys by digital image correlation and infrared thermography. Appl Phys Lett 114:101903
140.
Shariat BS, Bakhtiari S, Yang H, Liu Y (2019) Experimental and numerical data for transformation propagation in NiTi shape memory structures. Data Brief 27:104566
141.
Michaelis N, Welsch F, Kirsch SM, Seelecke S, Schütze A (2019) Resistance monitoring of shape memory material stabilization during elastocaloric training. Smart Mater Struct 28:105046
142.
Shariat BS, Bakhtiari S, Yang H, Liu Y (2019) Computational and experimental analyses of martensitic transformation propagation in shape memory alloys. J Alloys Compd 806:1522–1528
143.
144.
Sharar D, Donovan B, Warzoha R, Wilson A, Leff A, Hanrahan B (2019) Solid-state thermal energy storage using reversible martensitic transformations. Appl Phys Lett 114:143902
145.
You Y, Gu X, Zhang Y, Moumni Z, Anlas G, Zhang W (2019) Effect of thermomechanical coupling on stress-induced martensitic transformation around the crack tip of edge cracked shape memory alloy. Int J Fracture 216:123–133
146.
Jury A, Balandraud X, Heller L, Alarcon E, Karlik M (2020) One-dimensional heat source reconstruction applied to phase transforming superelastic Ni-Ti wire. In: Baldi A, Kramer S, Pierron F, Considine J, Bossuyt S, Hoefnagels J (eds) Residual stress, thermomechanics & infrared imaging and inverse problems, volume 6. conference proceedings of the society for experimental mechanics series. Springer, Cham, pp 33–40
147.
Shen Y, Wei Z, Sun W, Zhang Y, Liu E, Liu J (2020) Large elastocaloric effect in directionally solidified all-d-metal Heusler metamagnetic shape memory alloys. Acta Mater 188:677–685
148.
Asfaw A, Sherif M, Xing G, Ozbulut O (2020) Experimental investigation on buckling and post-buckling behavior of superelastic shape memory alloy bars. J Mater Eng Perform 29:3127–3140
149.
Wang J, Ren X, Xu Y, Zhang W, Zhu J, Li B (2020) Thermodynamic behavior of NiTi shape memory alloy against low-velocity impact: experiment and simulation. Int J Impact Eng 139:103532
150.
Furgiuele F, Magarò P, Maletta C, Sgambitterra E (2020) Functional and structural fatigue of pseudoelastic NiTi: global vs local thermo-mechanical response. Shape Memory Superelasticity 6:242–255
151.
Masoudi Moghaddam SA, Yarmohammad Tooski M, Jabbari M, Khorshidvand AR (2020) Experimental investigation of sandwich panels with hybrid composite face sheets and embedded shape memory alloy wires under low velocity impact. Polym Compos 41:4811–4829
152.
Yuan B, Qian M, Zhang X, Geng L (2020) Grain structure related inhomogeneous elastocaloric effects in Cu–Al–Mn shape memory microwires. Scr Mater 178:356–360
153.
Mutlu F, Anlaş G, Moumni Z (2020) Effect of loading rate on fracture mechanics of NiTi SMA. Int J Fracture 224:151–165
154.
Ianniciello L, Romanini M, Manosa L, Planes A, Engelbrecht K, Vives E (2020) Tracking the dynamics of power sources and sinks during the martensitic transformation of a Cu–Al–Ni single crystal. Appl Phys Lett 116:183901
155.
Nataf G, Romanini M, Vives E, Zuzek B, Planes A, Tusek J, Moya X (2020) Suppression of acoustic emission during superelastic tensile cycling of polycrystalline Ni50.4Ti49.6. Phys. Rev. Mater. 4:093604
156.
Li M, Chen M, Sun Q (2021) Nonlocal modeling and analysis of spatiotemporal patterns in non-isothermal phase transformation of NiTi strips. Int J Solids Struct 221:103–116
157.
Shariat BS, Bakhtiari S, Yang H, Liu Y (2021) Controlled initiation and propagation of stress-induced martensitic transformation in functionally graded NiTi. J Alloys Compd 851:156103
158.
Alarcon E, Heller L (2021) Deformation infrared calorimetry for materials characterization applied to study cyclic superelasticity in NiTi wires. Mater Des 199:109406
159.
Kilic U, Daghash S, Sherif M, Ozbulut O (2021) Tensile characterization of graphene nanoplatelet/shape memory alloy/epoxy composites using digital and thermal imaging. Polym Compos 42:1235–1244
160.
Jongchansitto P, Yachai T, Preechawuttipong I, Boufayed R, Balandraud X (2021) Concept of mechanocaloric granular material made from shape memory alloy. Energy 219:119656
161.
Lu N, Chen C (2021) Inhomogeneous martensitic transformation behavior and elastocaloric effect in a bicrystal Cu–Al–Mn shape memory alloy. Mater Sci Eng A 800:140386
162.
Sharar D, Radice J, Warzoha R, Hanrahan B, Smith A (2021) Low-force elastocaloric refrigeration via bending. Appl Phys Lett 118:184103
163.
Shastry V, Singh G, Ramamurty U (2021) On the fatigue life enhancement due to periodic healing of a NiTi shape memory alloy. Mater Sci Eng A 815:141272
164.
Calloch S, Bouvet C, Hild F, Doudard C, Lexcellent C (2002) Analysis of mechanical behavior and in-situ observations of Cu–Al–Be SMA under biaxial compressive tests by using DIC. X Wu, Y Qin, J Fang, J Ke (Eds) Third International Conference on Experimental Mechanics. Vol. 4537. Proceedings of the Society of Photo-Optical Instrumentation Engineers (SPIE). pp 83–86
165.
Moore CL, Bruck HA (2002) A fundamental investigation into large strain recovery of one-way shape memory alloy wires embedded in flexible polyurethanes. Smart Mater Struct 11:130–139
166.
Bruck HA, Moore CL, Valentine TL (2002) Repeatable bending actuation in polyurethanes using opposing embedded one-way shape memory alloy wires exhibiting large deformation recovery. Smart Mater Struct 11:305
167.
Umezaki E, Ichikawa T (2003) Measurement of deformation of epoxy resin plates with an embedded SMA wire using digital image correlation. Int J Mod Phys B 17:1750–1755
168.
Bruck HA, Moore CL, Valentine TM (2004) Bending actuation in polyurethanes with a symmetrically graded distribution of one-way shape memory alloy wires. Exp Mech 44:62–70
169.
Murasawa G, Yoneyama S, Sakuma T, Takashi M (2006) Influence of cyclic loading on inhomogeneous deformation behavior arising in NiTi shape memory alloy plate. Mater Trans 47:780–786
170.
Murasawa G, Yoneyama S (2006) Local strain distribution arising in shape memory alloy composite subjected to thermal loading. Mater Trans 47:766–771
171.
Shen L, He J, Su Y, Chu W, Qiao L (2006) In situ study of cracking for Ni2MnGa ferro-magnetic shape memory alloy. Acta Metall Sin 42:810–814
172.
Dutta I, Pan D, Ma S, Majumdar B, Harris S (2006) Role of shape-memory alloy reinforcements on strain evolution in lead-free solder joints. Electron Mater 35:1902–1913
173.
Murasawa G, Yoneyama S, Sakuma T (2007) Nucleation, bifurcation and propagation of local deformation arising in NiTi shape memory alloy. Smart Mater Struct 16:160–167
174.
Daly S, Ravichandran G, Bhattacharya K (2007) Stress-induced martensitic phase transformation in thin sheets of Nitinol. Acta Mater 55:3593–3600
175.
Daly S, Miller A, Ravichandran G, Bhattacharya K (2007) An experimental investigation of crack initiation in thin sheets of nitinol. Acta Mater 55:6322–6330
176.
Hamilton R, Sehitoglu H, Aslantas K, Efstathiou C, Maier H (2008) Intermartensite strain evolution in NiMnGa single crystals. Acta Mater 56:2231–2236
177.
Efstathiou C, Sehitoglu H, Carroll J, Lambros J, Maier HJ (2008) Full-field strain evolution during intermartensitic transformations in single-crystal NiFeGa. Acta Mater 56:3791–3799
178.
Sánchez-Arévalo FM, Pulos G (2008) Use of digital image correlation to determine the mechanical behavior of materials. Mater Charact 59:1572–1579
179.
Efstathiou C, Sehitoglu H (2008) Local transformation strain measurements in precipitated NiTi single crystals. Scr Mater 59:1263–1266
180.
Daly S, Rittel D, Bhattacharya K, Ravichandran G (2009) Large deformation of nitinol under shear dominant loading. Exp Mech 49:225–233
181.
Merzouki T, Collard C, Bourgeois N, Zineb T, Meraghni F (2009) Coupling between experiment and numerical simulation of shape memory alloy multicrystal. In: Sittner P, Paidar V, Heller L, Seiner H (eds) ESOMAT 2009—8th European symposium on martensitic transformations. EDP Sciences, Les Ulis
182.
Murasawa G, Kitamura K, Yoneyama S, Miyazaki S, Miyata K, Nishioka A, Koda T (2009) Macroscopic stress-strain curve, local strain band behavior and the texture of NiTi thin sheets. Smart Mater Struct 18:055003
183.
Sánchez-Arévalo F, Garcia-Fernández T, Pulos G, Villagrán-Muniz M (2009) Use of digital speckle pattern correlation for strain measurements in a CuAlBe shape memory alloy. Mater Charact 60:775–782
184.
Schaefer A, Wagner M (2009) Strain mapping at propagating interfaces in pseudoelastic NiTi. In: Sittner P, Paidar V, Heller L, Seiner H (eds) ESOMAT 2009—8th European symposium on martensitic transformations. EDP Sciences, Les Ulis
185.
Bourgeois N, Meraghni F, Ben Zineb T (2010) Measurement of local strain heterogeneities in superelastic shape memory alloys by digital image correlation. In: Kohl M, Chernenko V (eds) 3rd International symposium on shape memory materials for smart systems/E-MRS spring meeting. Vol. 10. Physics procedia. Elsevier, Amsterdam, pp 4–10
186.
Lackmann J, Regenspurger R, Maxisch M, Grundmeier G, Maier HJ (2010) Defect formation in thin polyelectrolyte films on polycrystalline NiTi substrates. J Mech Behav Biomed Mater 3:436–445
187.
Dadda J, Maier H, Karaman I, Chumlyakov Y (2010) High-temperature in-situ microscopy during stress-induced phase transformations in Co49Ni21Ga30 shape memory alloy single crystals. Int J Mater Res 101:1503–1513
188.
Merzouki T, Collard C, Bourgeois N, Zineb TB, Meraghni F (2010) Coupling between measured kinematic fields and multicrystal SMA finite element calculations. Mech Mater 42:72–95
189.
Dilibal S, Sehitoglu H, Hamilton RF, Maier HJ, Chumlyakov Y (2010) On the volume change in Co–Ni–Al during pseudoelasticity. Mater Sci Eng A 528:2875–2881
190.
Murasawa G, Yoneyama S, Miyata K, Nishioka A, Koda T (2011) Finite element analysis and experimental measurement of deformation behavior for NiTi plate with stress concentration part under uniaxial tensile loading. Strain 47:389–397
191.
Hamilton RF, Dilibal S, Sehitoglu H, Maier HJ (2011) Underlying mechanism of dual hysteresis in NiMnGa single crystals. Mater Sci Eng A 528:1877–1881
192.
Lackmann J, Niendorf T, Maxisch M, Grundmeier G, Maier HJ (2011) High-resolution in-situ characterization of the surface evolution of a polycrystalline NiTi SMA-alloy under pseudoelastic deformation. Mater Charact 42:298–303
193.
Grolleau V, Louche H, Delobelle V, Penin A, Rio G, Liu Y, Favier D (2011) Assessment of tension-compression asymmetry of NiTi using circular bulge testing of thin plates. Scr Mater 65:347–350
194.
Reedlunn B, Churchill C, Nelson E, Daly S, Shaw J (2012) Bending of superelastic shape memory alloy tubes. Proceedings of the ASME conference on smart materials adaptive structures and intelligent systems (SMASIS 2011), vol 1. ASME, New York, pp 249–258
195.
Reedlunn B, Daly S, Shaw J (2012) Tension-torsion experiments on superelastic shape memory alloy tubes. Proceedings of the ASME conference on smart materials adaptive structures and intelligent systems, vol 2. ASME, New York, pp 213–222
196.
Taillebot V, Lexcellent C, Vacher P (2012) About the transformation phases zones of shape memory alloys’ fracture tests on single-edge-craked specimen. Funct Mater Lett 05:1250007
197.
Zeng P, Du H, Zhao J, Lei L, Sun GFC, Gao Y (2013) Advances on experiment, measure and numerical simulation for behaviors of material processes. In: Zhang S, Liu X, Cheng M (eds) 11th international conference on numerical methods in industrial forming processes (NUMIFORM 2013. Vol. 1532. AIP conference proceedings. American Institute of Physics, Melville, pp 38–44
198.
Chemisky Y, Echchorfi R, Meraghni F, Bourgeois N, Piotrowski B (2013) Determination of the characteristic parameters of tension-compression asymmetry of shape memory alloys using full-field measurements. In: Prokoshkin S, Resnina N (eds) European symposium on martensitic transformations. Vol. 738–739. Materials science forum. Trans Tech Publications Ltd, Zurich
199.
Bewerse C, Gall KR, Mcfarland GJ, Zhu P, Brinson LC (2013) Local and global strains and strain ratios in shape memory alloys using digital image correlation. Mater Sci Eng A 568:134–142
200.
Bubulinca C, Balandraud X, Delpueyo D, Grédiac M, Stanciu S, Abrudeanu M, Plaiasu AG, Dicu MM, Nitu EL (2013) Study of a monocrystalline Cu–Al–Ni shape memory alloy by infrared thermography. J Optoelectron Adv Mater 15:544–549
201.
He H, Saletti D, Pattofatto S, Shi F, Zhao H (2013) Experimental observation of phase transformation front of SMA under impact loading. In: Prokoshkin S, Resnina N (eds) 13th international conference on fracture 2013 (ICF-13), vol 4. International Congress on Fracture (ICF), Atlanta, pp 2658–2666
202.
Chen X, He Y, Moumni Z (2013) Twin boundary motion in NiMnGa single crystals under biaxial compression. Mater Lett 90:72–75
203.
Kim K, Daly S (2013) The effect of texture on stress-induced martensite formation in nickel–titanium. Smart Mater Struct 22:075012
204.
Watkins R, Reedlunn B, Shaw J (2014) Uniaxial, pure bending and buckling characterization of superelastic NiTi rods and tubes: an experimental study. Proceedings of the ASME conference on smart materials adaptive structures and intelligent systems, vol 2. ASME, New York
205.
Cornell S, Leser W, Hochhalter J, Newman J, Hartl J (2014) Development and characterization of embedded sensory particles using multi-scale 3D digital image correlation. Proceedings of the ASME conference on smart materials adaptive structures and intelligent systems, vol 2. ASME, New York
206.
Pinneker V, Gueltig M, Sozinov A, Kohl M (2014) Single phase boundary actuation of a ferromagnetic shape memory foil. Acta Mater 64:179–187
207.
Bechle N, Kyriakides S (2014) Localization in NiTi tubes under bending. Int J Solids Struct 51:967–980
208.
Shafaghi N, Haghgouyan B, Aydiner CC, Anlas G (2015) Experimental and computational evaluation of crack-tip displacement field and transformation zone in NiTi. Mater Today Proc 2:S763–S766
209.
Sgambitterra E, Lesci S, Maletta C (2015) Effects of higher order terms in fracture mechanics of shape memory alloys by digital image correlation. In: Iacoviello F, Ferro G, Susmel L (eds) XXIII Italian group of fracture meeting, IGFXXIII. Vol. 109. Procedia Engineering. Elsevier, Amsterdam, pp 457–464
210.
Chemisky Y, Meraghni F, Bourgeois N, Cornell S, Echchorfi R, Patoor E (2015) Identification of model parameter for the simulation of SMA structures using full field measurements. In: Karaman I, Arroyave R, Masad E (eds) Proceedings of the TMS middle east—Mediterranean materials congress on energy and infrastructure systems (MEMA 2015). Wiley, Malden, pp 191–200
211.
Chemisky Y, Meraghni F, Bourgeois N, Cornell S, Echchorfi R, Patoor E (2015) Analysis of the deformation paths and thermomechanical parameter identification of a shape memory alloy using digital image correlation over heterogeneous tests. Int J Mech Sci 96–97:13–24
212.
Elibol C, Wagner MFX (2015) Investigation of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression-shear. Mater Sci Eng A 621:76–81
213.
Patriarca L, Sehitoglu H (2015) High-temperature superelasticity of Ni50.6Ti24.4Hf25.0 shape memory alloy. Scr Mater 101:12–15
214.
El-Tahan M, Dawood M, Song G (2015) Development of a self-stressing NiTiNb shape memory alloy (SMA)/fiber reinforced polymer (FRP) patch. Smart Mater Struct 24:065035
215.
Lanba A, Hamilton RF (2015) The impact of martensite deformation on shape memory effect recovery strain evolution. Metall Mater Trans A 46:3481–3489
216.
Kimiecik M, Jones JW, Daly S (2015) Grain orientation dependence of phase transformation in the shape memory alloy Nickel–Titanium. Acta Mater 94:214–223
217.
Laydi M, Lexcellent C (2015) Phase transformation surfaces analysis for SMA around a crack tip with curvature. Shap Mem Superelasticity 1:339–346
218.
Ojha A, Alkan S, Patriarca L, Sehitoglu H, Chumlyakov Y (2015) Shape memory behavior in Fe3Al-modeling and experiments. Philos Mag 95:2553–2570CrossRef
219.
Ojha A, Patriarca L, Sehitoglu H (2015) Pseudoelasticity in Fe3Ga with boron—combined atomistic-micromechanical treatment. Int J Plasticity 72:185–199
220.
Elibol C, Wagner X (2015) Strain rate effects on the localization of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression-shear. Mater Sci Eng A 643:194–202
221.
Wu Y, Patriarca L, Li G, Sehitoglu H, Soejima Y, Ito T, Nishida M (2015) Shape memory response of polycrystalline NiTi12.5Hf alloy: transformation at small scales. Shap Mem Superelasticity 1:387–397
222.
Sgambitterra E, Maletta C, Furgiuele F (2015) Investigation on crack tip transformation in NiTi alloys: effect of the temperature. Shap Mem Superelasticity 1:275–283
223.
Xiao Y, Zeng P, Lei L (2016) Experimental investigation on the mechanical instability of superelastic NiTi shape memory alloy. J Mater Eng Perform 25:3551–3557
224.
Ossmer H, Chluba C, Quandt E, Kohl M (2016) TiNi-based films for elastocaloric microcooling—fatigue life and device performance. APL Mater 4:064102
225.
Xiao Y, Zeng P, Lei L (2016) Experimental investigation on local mechanical response of superelastic NiTi shape memory alloy. Smart Mater Struct 25:105701
226.
Patriarca L, Sehitoglu H, Panchenko E, Chumlyakov Y (2016) High-temperature functional behavior of single crystal Ni51.2Ti23.4Hf25.4 shape memory alloy. Acta Mater 106:333–343
227.
Kimiecik M, Jones JW, Daly S (2016) The effect of microstructure on stress-induced martensitic transformation under cyclic loading in the SMA Nickel–Titanium. J Mech Phys Solids 89:16–30
228.
Patriarca L, Wu Y, Sehitoglu H, Chumlyakov Y (2016) High temperature shape memory behavior of Ni50.3Ti25Hf24.7 single crystals. Scr Mater 115:133–136
229.
Wu Y, Patriarca L, Sehitoglu H, Chumlyakov Y (2016) Ultrahigh tensile transformation strains in new Ni50.5Ti36.2Hf13.3 shape memory alloy. Scr Mater 118:51–54
230.
Haghgouyan B, Shafaghi N, Aydıner C, Anlas G (2016) Experimental and computational investigation of the effect of phase transformation on fracture parameters of an SMA. Smart Mater Struct 25:075010
231.
LePage WS, Daly SH, Shaw JA (2016) Cross polarization for improved digital image correlation. Exp Mech 56:969–985
232.
Bimber BA, Hamilton RF, Keist J, Palmer TA (2016) Anisotropic microstructure and superelasticity of additive manufactured NiTi alloy bulk builds using laser directed energy deposition. Mater Sci Eng A 674:125–134
233.
Xiao Y, Zeng P, Lei L (2016) Experimental observations on mechanical response of three-phase NiTi shape memory alloy under uniaxial tension. Mater Res Express 3:105701
234.
Xiao Y, Zeng P, Lei L (2016) Effect of double-edge semi-circular notches on the mechanical response of superelastic NiTi shape memory alloy: experimental observations. J Strain Anal Eng Des 51:555–562
235.
Murasawa G, Yeduru SR, Kohl M (2016) Macroscopic inhomogeneous deformation behavior arising in single crystal Ni–Mn–Ga foils under tensile loading. Opt Lasers Eng 87:139–145
236.
Gong J, Daly S (2016) Microscale repeatability of the shape-memory effect in fine NiTi wires. Shap Mem Superelasticity 2:298–309
237.
Maletta C, Sgambitterra E, Niccoli F (2016) Temperature dependent fracture properties of shape memory alloys: novel findings and a comprehensive model. Sci Rep 6:17
238.
Wheeler R, Ottmers C, Hewling B, Lagoudas D (2016) Actuator lifetime predictions for Ni60Ti40 shape memory alloy plate actuators. In: Goulbourne N (ed) Behavior and mechanics of multifunctional materials and composites 2016. International Society for Optics and Photonics, Bellingham
239.
Xie X, Kan Q, Kang G, Lu F, Chen K (2016) Observation on rate-dependent cyclic transformation domain of super-elastic NiTi shape memory alloy. Mater Sci Eng A 671:32–47
240.
Sehitoglu H, Wu Y, Alkan S, Ertekin E (2017) Plastic deformation of B2-NiTi—is it slip or twinning? Philos Mag Lett 97:217–228
241.
Niccoli F, Garion C, Maletta C, Sgambitterra E, Furgiuele F, Chiggiato P (2017) Beam-pipe coupling in particle accelerators by shape memory alloy rings. Mater Des 114:603–611
242.
Xiao Y, Zeng P, Lei L (2017) Grain size effect on mechanical performance of nanostructured superelastic NiTi alloy. Mater Res Express 4:035702
243.
Sehitoglu H, Wu Y, Patriarca L (2017) Shape memory functionality under multi-cycles in NiTiHf. Scr Mater 129:11–15
244.
Laplanche G, Birk T, Schneider S, Frenzel J, Eggeler G (2017) Effect of temperature and texture on the reorientation of martensite variants in NiTi shape memory alloys. Acta Mater 127:143–152
245.
Abuzaid W, Sehitoglu H (2017) Functional fatigue of Ni50.3Ti25Hf24.7. Heterogeneities and evolution of local transformation strains. Mater Sci Eng A 696:482–492
246.
Jiang D, Kyriakides S, Bechle NJ, Landis CM (2017) Bending of pseudoelastic NiTi tubes. Int J Solids Struct 124:192–214
247.
Zheng B, Dawood M (2017) Fatigue strengthening of metallic structures with a thermally activated shape memory alloy fiber-reinforced polymer patch. J Compos Constr 21:04016113
248.
Paul PP, Paranjape HM, Amin-Ahmadi B, Stebner AP, Dunand DC, Brinson LC (2017) Effect of machined feature size relative to the microstructural size on the superelastic performance in polycrystalline NiTi shape memory alloys. Mater Sci Eng A 706:227–235
249.
Xiao Y, Zeng P, Lei L, Zhang Y (2017) In situ observation on temperature dependence of martensitic transformation and plastic deformation in superelastic NiTi shape memory alloy. Mater Des 134:111–120
250.
Zheng L, He Y, Moumni Z (2017) Investigation on fatigue behaviors of NiTi polycrystalline strips under stress-controlled tension via in-situ macro-band observation. Int J Plast 90:116–145
251.
Shayanfard P, Heller L, Dostalova D, Alarcon E, Frost M, Sedlak P, Sandera P, Sittner P, Pokluda J, Hornikova J (2017) Effect of martensitic transformation on local stresses and strains at a notch of cyclically loaded superelastic NiTi ribbon. In: Gdoutos E (ed) 14th International Conference on Fracture 2017 (ICF-14), June 18–23, 2017. ICF, Rhodes
252.
Zotov N, Pfund M, Polatidis E, Mark A, Mittemeijer E (2017) Change of transformation mechanism during pseudoelastic cycling of NiTi shape memory alloys. Mater Sci Eng A 682:178–191
253.
Paranjape H, Paul P, Amin-Ahmadi B, Sharma H, Dale D, Ko J, Chumlyakov Y, Brinson L, Stebner A (2018) In situ, 3D characterization of the deformation mechanics of a superelastic NiTi shape memory alloy single crystal under multiscale constraint. Acta Mater 144:748–757
254.
Alkan S, Wu Y, Sehitoglu H (2017) Giant non-Schmid effect in NiTi. Extreme Mech Lett 15:38–43
255.
Dilibal S, Hamilton R, Lanba A (2017) The effect of employed loading mode on the mechanical cyclic stabilization of NiTi shape memory alloys. Intermetallics 89:1–9
256.
Bielefeldt B, Hochhalter J, Hartl D (2018) Shape memory alloy sensory particles for damage detection: experiments, analysis, and design studies. Struct Health Monit 17:777–814
257.
Bian X, Saleh A, Pereloma E, Davies C, Gazder A (2018) A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension. Mater Sci Eng A 726:102–112
258.
Sittner P, Sedlak P, Seiner H, Sedmak P, Pilch J, Delville R, Heller L, Kaderavek L (2018) On the coupling between martensitic transformation and plasticity in NiTi: experiments and continuum based modelling. Prog Mater Sci 98:249–298
259.
Zhang S, He Y (2018) Fatigue resistance of branching phase-transformation fronts in pseudoelastic NiTi polycrystalline strips. Int J Solids Struct 135:233–244
260.
Chen D, Sun S, Dulieu-Barton J, Li Q, Wang W (2018) Crack growth analysis in welded and non-welded T-joints based on lock-in digital image correlation and thermoelastic stress analysis. Int J Fatigue 110:172–185
261.
Hsu W, Polatidis E, Smid M, Casati N, Van Petegem S, Van Swygenhoven H (2018) Load path change on superelastic NiTi alloys: In situ synchrotron XRD and SEM DIC. Acta Mater 144:874–883
262.
LePage W, Ahadi A, Lenthe W, Sun Q, Pollock T, Shaw J, Daly S (2018) Grain size effects on NiTi shape memory alloy fatigue crack growth. J Mater Res 33:91–107
263.
Zhang S, Chen X, Moumni Z, He Y (2018) Thermal effects on high-frequency magnetic-field-induced martensite reorientation in ferromagnetic shape memory alloys: an experimental and theoretical investigation. Int J Plasticity 108:1–20
264.
Zhang S, Chen X, Moumni Z, He Y (2018) Coexistence and compatibility of martensite reorientation and phase transformation in high-frequency magnetic-field-induced deformation of Ni–Mn–Ga single crystal. Int J Plasticity 110:110–122
265.
Bian X, Gazder A, Saleh A, Pereloma E (2018) A comparative study of a NiTi alloy subjected to uniaxial monotonic and cyclic loading-unloading in tension using digital image correlation: the grain size effect. J Alloys Compd 777:723–735
266.
Elibol C, Wagner M (2018) Virtual extensometer analysis of martensite band nucleation, growth, and strain softening in pseudoelastic NiTi subjected to different load cases. Materials 11:1458
267.
Sgambitterra E, Maletta C, Furgiuele F, Sehitoglu H (2018) Fatigue crack propagation in [012] NiTi single crystal alloy. Int J Fatigue 112:9–20
268.
Bucsek A, Dale D, Ko J, Chumlyakov Y, Stebner A (2018) Measuring stress-induced martensite microstructures using far-field high-energy diffraction microscopy. Acta Crystallogr A 74:425–446
269.
Bucsek A, Pagan D, Casalena L, Chumlyakov Y, Mills M, Stebner A (2019) Ferroelastic twin reorientation mechanisms in shape memory alloys elucidated with 3D X-ray microscopy. J Mech Phys Solids 124:897–928
270.
Chen Y, Tyc O, Kaderavek L, Molnarova O, Heller L, Sittner P (2019) Temperature and microstructure dependence of localized tensile deformation of superelastic NiTi wires. Mater Des 174:107797
271.
Kazinakis K, Kyriakides S, Jiang D, Bechle N, Landis C (2021) Buckling and collapse of pseudoelastic NiTi tubes under bending. Int J Solids Struct 221:2–17
272.
Heller L, Šittner P, Sedlák P, Seiner H, Tyc O, Kadeřávek L, Sedmák P, Vronka M (2019) Beyond the strain recoverability of martensitic transformation in NiTi. Int J Plast 116:232–264
273.
Shuai J, Xiao Y (2019) In-situ study on texture-dependent martensitic transformation and cyclic irreversibility of superelastic NiTi shape memory alloy. Metall Mater Trans A 51:562–567
274.
Wu Y, Yaacoub J, Brenne F, Abuzaid W, Canadinc D, Sehitoglu H (2019) Deshielding effects on fatigue crack growth in shape memory alloys—a study on CuZnAl single-crystalline materials. Acta Mater 176:155–166
275.
Catoor D, Ma Z, Kumar S (2019) Cyclic response and fatigue failure of Nitinol under tension tension loading. J Mater Res 34:3504–3522
276.
Bahador A, Umeda J, Tsutsumi S, Hamzah E, Yusof F, Fujii H, Kondoh K (2019) Asymmetric local strain, microstructure and superelasticity of friction stir welded Nitinol alloy. Mater Sci Eng A 767:138344
277.
Kumar S, Marandi L, Balla V, Bysakh S, Piorunek D, Eggeler G, Das M, Sen I (2019) Microstructure—property correlations for additively manufactured NiTi based shape memory alloys. Materialia 8:100456
278.
Kyianytsia A, Ponçot M, Letoffe A, Boulet P, Migot S, Ghanbaja J, Cinar I, de Miranda R, Bechtold C, Kierren B, Ozatay O, Hauet T (2019) Magnetic anisotropy switching induced by shape memory effect in NiTi/Ni bilayer. Appl Phys Lett 115:222402
279.
Ma L, Li Y, Han G (2019) Study on fracture behavior of NiTi alloy by the digital image correlation method. In: Khotsianovsky A (ed) 7th global conference on materials science and engineering (CMSE2018). Vol. 474. IOP conference series—materials science and engineering. IOP Publishing Ltd, Bristol
280.
Sgambitterra E, Magaro P, Niccoli F, Renzo D, Maletta C (2019) Novel insight into the strain-life fatigue properties of pseudoelastic NiTi shape memory alloys. Smart Mater Struct 28:10LT03
281.
Wheeler R, Smith J, Ley N, Giri A, Young M (2019) Shape memory behavior of Ni49.5Ti50.5 processing-induced strain glass alloys. TMS 2019 148th annual meeting & exhibition supplemental proceedings. Minerals metals & materials series. Springer, Cham, pp 1411–1420
282.
Young B, Haghgouyan B, Lagoudas D, Karaman I (2019) Effect of temperature on the fracture toughness of a NiTiHf high temperature shape memory alloy. Shap Mem Superelasticity 5:362–373
283.
Bian X, Saleh A, Lynch P, Davies C, Pereloma E, Gazder A (2019) An in-situ synchrotron study of the B2 -> B19’ phase transformation in a Ni–Ti alloy subjected to uniaxial monotonic tension. Mater Sci Eng A 743:327–338
284.
Sgambitterra E, Maletta C, Magaro P, Renzo D, Furgiuele F, Sehitoglu H (2019) Effects of temperature on fatigue crack propagation in pseudoelastic NiTi shape memory alloys. Shap Mem Superelasticity 5:278–291
285.
Sgambitterra E, Magaro P, Niccoli F, Renzo D, Maletta C (2019) Low-to-high cycle fatigue properties of a NiTi shape memory alloy. In: Iacoviello F, Susmel L, Firrao D, Ferro G (eds) 25th international conference on fracture and structural integrity. Vol. 18. Procedia structural integrity. Elsevier, Amsterdam, pp 908–913
286.
Zeng Z, Cong B, Oliveira J, Ke W, Schell N, Peng B, Qi Z, Ge F, Zhang W, Ao S (2020) Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: microstructure and mechanical properties. Addit Manuf 32:101051
287.
Paranjape H, Ng B, Ong I, Vien L, Huntley C (2020) Phase transformation volume amplitude as a low-cycle fatigue indicator in nickel-titanium shape memory alloys. Scr Mater 178:442–446
288.
Suhail R, Chen J, Amato G, McCrum D (2020) Mechanical behaviour of NiTiNb shape memory alloy wires—strain localization and effect of strain rate. Mech Mater 144:103346
289.
Mohajeri M, Case R, Haghgouyan B, Lagoudas D, Castaneda H (2020) Loading influence on the corrosion assessment during stress-induced martensite reorientation in nickel-titanium SMA. Smart Mater Struct 29:035013
290.
Zhao H, Andrawes B (2020) Innovative prestressing technique using curved shape memory alloy reinforcement. Constr Build Mater 238:117687
291.
Suhail R, Amato G, McCrum D (2020) Heat-activated prestressing of NiTib shape memory alloy wires. Eng Struct 206:110128
292.
Sidharth R, Wu Y, Brenne F, Abuzaid W, Sehitoglu H (2020) Relationship between functional fatigue and structural fatigue of iron-based shape memory alloy FeMnNiAl. Shape Mem Superelasticity 6:256–272
293.
Li C, Ao S, Oliveira J, Cheng M, Zeng Z, Cui H, Luo Z (2020) Ultrasonic spot welded NiTi joints using an aluminum interlayer: Microstructure and mechanical behavior. J Manuf Process 56:1201–1210
294.
Reedlunn B, LePage W, Daly S, Shaw J (2020) Axial-torsion behavior of superelastic tubes: part I, proportional isothermal experiments. Int J Solids Struct 199:1–35
295.
Su T, Lu N, Chen C, Chen C (2020) Full-field stress and strain measurements revealing energy dissipation characteristics in martensitic band of Cu–Al–Mn shape memory alloy. Mater Today Commun 24:101321
296.
Samothrakitis S, Larsen CB, Woracek R, Heller L, Kopeček J, Gerstein G, Maier HJ, Rameš M, Tovar M, Šittner P, Schmidt S, Strobl M (2020) A multiscale study of hot-extruded CoNiGa ferromagnetic shape-memory alloys. Mater Des 196:109118
297.
Aycock K, Weaver J, Paranjape HM, Senthilnathan K, Bonsignore C, Craven B (2021) Full-field microscale strain measurements of a nitinol medical device using digital image correlation. J Mech Behav Biomed Mater 114:104221
298.
Shen V, Bumgardner C, Actis L, Ritz J, Park J, Li X (2020) 3D digital image correlation evaluation of arthrodesis implants. Clin Biomech 71:29–36
299.
Suhail R, Amato G, McCrum D (2020) Heat-activated prestressing of NiTiNb shape memory alloy wires. Eng Struct 206:110128
300.
Xiao R, Hou B, Sun Q, Zhao H, Li Y (2020) An experimental investigation of the nucleation and the propagation of NiTi martensitic transformation front under impact loading. Int J Impact Eng 140:103559
301.
Shariat BS (2020) Experimental investigation of heterogeneous strain fields created in metallic materials. In: IOP Publishing (ed) 2019 7th International Conference on Mechanical, Automative and Materials Engineering (CMAME), vol 831. IOP Conference Series-Materials Science and Engineering, IOP Publishing Ltd, Bristol, England, p 012006
302.
Safaei K, Nematollahi M, Bayati P, Dabbaghi H, Benafan O, Elahinia M (2021) Torsional behavior and microstructure characterization of additively manufactured NiTi shape memory alloy tubes. Eng Struct 226:111383
303.
Paranjape H, Aycock K, Bonsignore C, Weaver J, Craven B, Duerig T (2021) A probabilistic approach with built-in uncertainty quantification for the calibration of a superelastic constitutive model from full-field strain data. Comput Mater Sci 192:110357
304.
Abut B, Haghgouyan B, Karaman I, Lagoudas D (2021) Effect of specimen thickness on the fracture toughness of a NiTi shape memory alloy. Shap Mem Superelasticity 7:90–100
305.
Sgambitterra E, Magaro P, Niccoli F, Furgiuele F, Maletta C (2021) Fatigue crack growth in austenitic and martensitic NiTi: modeling and experiments. Shap Mem Superelasticity 7:250–261
306.
Bauer A, Vollmer M, Niendorf T (2021) Effect of crystallographic orientation and grain boundaries on martensitic transformation and superelastic response of oligocrystalline Fe–Mn–Al–Ni shape memory alloys. Shap Mem Superelasticity 7:373–382
307.
Elibol C (2021) Superelastic anisotropy and meso-scale interface regions in textured NiTi sheets. J Fac Eng Archit Gazi Univ 36:2121–2133
308.
Patriarca L, Abuzaid W, Carlucci G, Belelli F, Casati R (2021) Pseudoelasticity in FeMn–NiAl shape memory alloy lattice structures produced by laser powder bed fusion. Mater Lett 302:130349
309.
Su T, Lu N, Chen C, Chen C (2021) On the decrease in transformation stress in a bicrystal Cu–Al–Mn shape-memory alloy during cyclic compressive deformation. Materials 14:4439
310.
Xiao R, Hou B, Sun Q, Zhao H, Li Y (2021) Mechanical behaviors of polycrystalline NiTi SMAs of various grain sizes under impact loading. Sci China Ser E Technol Sci 64:1401–1411
311.
Qing X, Qin Y, Dai F (1996) Experimental investigation of micromechanical behavior of advanced materials by moiré interferometry. Opt Lasers Eng 25:179–189
312.
Zhang X, Sun Q, Yu S (1999) On the strain jump in shape memory alloys. A crystallographic—based mechanics analysis. Acta Mech Sin 15:134–144
313.
Sun Q, Xu T, Zhang X (1999) On deformation of A–M interface in single crystal shape memory alloys and some related issues. J Eng Mater Technol ASME 121:38–43
314.
Zhang XY, Sun QP, Yu SW (2000) A non-invariant plane model for the interface in CuAlNi single crystal shape memory alloys. J Mech Phys Solids 48:2163–2182
315.
Tse K, Sun Q (2000) Some deformation features of polycrystalline superelastic NiTi shape memory alloy thin strips and wires under tension. In: Yu T, Sun Q, Kim J (eds) Advances in engineering plasticity, PTS 1–2. Vol. 177–1. Key engineering materials. Trans Tech Publications Ltd, Zurich, pp 455–460
316.
Fang D, Liu J, Xu G, Dai F (2000) Micromechanical study of formation and evolution of martensite for Cu–Al–Ni single crystal by moiré interferometry. Theor Appl Fract Mech 33:49–55
317.
Jonnalagadda KD, Sottos NR, Qidwai MA, Lagoudas D (2000) In situ displacement measurements and numerical predictions of embedded SMA transformation. Smart Mater Struct 9:701–710
318.
Du H, Xie H, Jiang H, Rong L, Luo Q, Gu C, Zhao Y (2006) Strain analysis on porous TiNi SMA using SEM moiré method. In: Lee S, Kim Y (eds) Experimental mechanics in nano and biotechnology, Pts 1 and 2. Vol. 326–328. Key engineering materials. Trans Tech Publications Ltd, Zurich, pp 79–82
319.
Perry KE, Labossiere PE, Steffler E (2007) Measurement of deformation and strain in nitinol. Exp Mech 47:373–380
320.
Du H, Xie H, Guo Z, Pan B, Luo Q, Gu C, Jiang H, Rong L (2007) Large-deformation analysis in microscopic area using micro-moiré methods with a focused ion beam milling grating. Opt Lasers Eng 45:1157–1169
321.
Xie H, Kishimoto S, Li Y, Liu D, Zhang M, Hu Z (2008) Deformation Analysis of Shape Memory Alloy Using SEM Scanning Moiré Method. In: Yang W, Geni M, Wang T, Zhuang Z (eds) Advances in fracture and materials behavior, PTS 1-2. Vol. 33–37. Advanced materials research. Trans Tech Publications Ltd, Zurich
322.
Wang Q, Xie H, Jiang H, Li Y, Dai F, Chen P, Zhang Q, Huang F (2008) Investigation on the deformation of TiNi shape memory alloy with a crack using moiré interferometry. Adv Mater Res 33–37:1–6
323.
Guo Z, Xie H, Dai F, Qiang H, Rong L, Chen P, Huang F (2009) Compressive behavior of 64% porosity NiTi alloy: an experimental study. Mater Sci Eng A 515:117–130
324.
Balandraud X, Barrera N, Biscari P, Grédiac M, Zanzotto G (2015) Strain intermittency in shape-memory alloys. Phys Rev B 91:174111
325.
Blaysat B, Balandraud X, Grédiac M, Vives E, Barrera N, Zanzotto G (2020) Concurrent tracking of strain and noise bursts at ferroelastic phase fronts. Commun Mater 1:3
326.
Lanba A, Hamilton R (2013) NiTi-based SMAs for self-post-tensioned bridge girders. In: Bakis C (ed) Proceedings of the American Society for Composites, vol 2. Destech Publications, Lancaster, pp 1640–1649
Metadaten
Titel
Applying Full-Field Measurement Techniques for the Thermomechanical Characterization of Shape Memory Alloys: A Review and Classification
verfasst von
D. Delpueyo
A. Jury
X. Balandraud
M. Grédiac
Publikationsdatum
10.12.2021
Verlag
Springer US
Erschienen in
Shape Memory and Superelasticity / Ausgabe 4/2021
Print ISSN: 2199-384X
Elektronische ISSN: 2199-3858
DOI
https://doi.org/10.1007/s40830-021-00355-w

Weitere Artikel der Ausgabe 4/2021

Shape Memory and Superelasticity 4/2021 Zur Ausgabe

Announcement

Cardiovascular Implant Durability Conference (CVID) Rescheduled to April

Technical Article

Effect of Ni/Ti Ratio and Ta Content on NiTiTa Alloys

Announcement

SMST 2022 Conference to be Held in San Diego, California

Technical Article

Microstructural, Mechanical, and Superelastic Behavior of Thermo-Mechanically Processed Nitinol Alloy

Technical Article

Continuous Heating Dissolution and Continuous Cooling Precipitation Diagrams of a Nickel-Titanium Shape Memory Alloy

Technical Article

Effect of Ce and Sb Elements Addition on Porous Ti–23 wt%Nb–Sn for Biomedical Applications

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise