nach oben

Erschienen in:

2011 | OriginalPaper | Buchkapitel

Science and Technology of Bolt-Adhesive Joints

verfasst von : Jan R. Weitzenböck, Dag McGeorge

Erschienen in: Hybrid Adhesive Joints

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter addresses bolt-adhesive joints to transfer both loads and moments. All our examples are taken from maritime applications. Experience has shown that bolt-adhesive joints in the maritime industry are not designed for hybrid action where one joining method improves the performance of the other. Rather they are used in a fail-safe-mode where one joining method takes over should the other fail. Three different applications will be discussed: (1) composite superstructures and composite to steel joints on large ocean going vessels, (2) adhesive bonding of windows, also known as “direct glazing” and (3) cellular sandwich concept for large ocean going ships such as bulk carriers. The sandwich is composed of two steel faces and a lightweight concrete core.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Technology of Clinch–Adhesive Joints

Nächstes Kapitel Science of Friction–Adhesive Joints

Adams, R.D.: The design of adhesively-bonded lap joints: modelling considerations. In: 46th SAMPE Symposium, pp. 402–414 (2001)

Anon: Guide to the Structural Use of Adhesives. The Institution of Structural Engineers, UK (1999)

Anon: Committee V.5 naval ship design. In: Proceedings of the 16th International Ship and Offshore Structure Congress, Southampton, UK (2006)

Bickford, J.H.: An Introduction to the Design and Behavior of Bolted Joints, 3rd edn, pp. 840–871. Marcel Dekker, NY (1995)

Beevers, A.: Forensic studies of adhesive joints, part 2—bonded air-craft structure. The performance of adhesive joints (PAJ)—project 3: environmental durability. http://www.adhesivestoolkit.com/ (1995). Accessed Sept 2010

Bergan, P., Bakken, K., Thienel, K.C.: Analysis and design of sandwich structures made of steel and lightweight concrete. In: III European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering (ECCM-2006), Lisbon, 5–8 June 2006

Bohlmann, R.E., Fogarty, J.H.: Demonstration of a composite to steel deck joint on a Navy destroyer. In: 9th International Conference on Marine Applications of Composite Materials: paper L, Melbourne, FL, USA, pp. 19–21 (2002)

Bond, A.E.: A review of industrial case histories. MTS programme on the performance of adhesive joints—project 3: environmental durability. http://www.adhesivestoolkit.com/ (1995). Accessed Sept 2010

Broughton, W.R., Crocker, L.E., Gower M.R.L.: Design Requirements for Bonded and Bolted Composite Structures. National Physical Laboratory, NPL Report MATC(A)65, January (2002)

10.

Burchardt, B., Diggelmann, K., Koch, S., Lanzendörfer, B.: Elastic Bonding. Verlag Moderne Industrie, Germany (1998)

11.

Croucher, T., Vanaman, A., Lee, S.: Computer controlled weldbonding of aluminium on the Fairchild A-10. Metal Prog. (1981)

12.

da Silva, L.F.M., das Neves, P.J.C., Adams, R.D., Spelt, J.K.: Analytical models of adhesively bonded joints—part I: literature survey. Int. J. Adhesion Adhesives 29, 319–330 (2009)CrossRef

13.

da Silva, L.F.M., das Neves, P.J.C., Adams, R.D., Wang, A., Spelt, J.K.: Analytical models of adhesively bonded joints—part II: comparative study. Int. J. Adhesion Adhesives 29, 331–341 (2009)CrossRef

14.

DNV: Offshore concrete structures. Offshore Standard—DNV-OS-C502 (2007)

15.

DNV: Rules for Ships. Sect. 6, Part 3, Chap. 3. “L. Side Scuttles, Windows and Skylights” (2010)

16.

DNV: Rules for High Speed, Light Craft and Naval Surface Craft. Sect. 1, Part 3, Chap. 6. G. Windows, 8 pp (2010)

17.

DNV: Rules for High Speed, Light Craft and Naval Surface Craft. Sect. 9, Part 3, Chap. 4. Bolted Connections, 28 pp (2010)

18.

Drain, K., Chandrasekharan, S.: Automotive applications for adhesives. In: ASM Engineered Materials Handbook. Adhesives and Sealants, vol. 3, pp. 551–557 (1990)

19.

Echtermeyer, A.T., McGeorge, D., Sund, O.E., Andresen, H.W., Fischer, K.P.: Repair of FPSO with composite patches. Presented at the fourth international conference on composite materials for offshore operations (CMOO-4), Houston, TX, USA, 4–5 October 2005

20.

Eurocode 3: Design of steel structures, part 1–8: design of joints, EN 1993-1-8 (2005)

21.

Eurocode 4: Design of composite steel and concrete structures—part 2: general rules and rules for bridges (2005)

22.

Gerwick, B.C., Venututi, W.J.: Fatigue Behaviour of Prestressed Concrete in a Ship Hull. Technical and Research Bulletin 2-24, The Society of Naval Architects and Marine Engineers (1979)

23.

Guthu, G.O.: Modelling of mechanical response and fracture in adhesively bonded joints. Master thesis, Faculty of Mathematics and Natural Sciences, University of Oslo (2010)

24.

Hayman, B.: Benchmark study of INCA panels without studs. In: Weitzenböck, J.R., Grafton, T. (eds.) Assessment of the INCA Steel-Concrete-Steel Sandwich Technology—Public Report. DNV Technical Report No. 2010-1284 (2010)

25.

Hentinen, M., Hildebrand, M.: How to efficiently join FRP structures to metal ships? In: 3rd International Conference on Fast Sea Transportation, FAST’95, Lübeck-Travemünde, Germany, 25–27 September 1995

26.

IACS: Side Scuttles, Windows and Skylights (Regulation 23). Unified Interpretation LL62, 2 pp (2010)

27.

IMO: SOLAS Chapter II-2 Part B, Regulation 33: Windows and Side-Scuttles (1992)

28.

IMO: SOLAS Chapter II-2 Part F, Regulation 17: Alternative Design and Arrangements (2002)

29.

ISO 614: Shipbuilding and marine structures—toughened safety glass panes for rectangular windows and side scuttles—punch method of non-destructive strength testing (1989)

30.

ISO 1751: Shipbuilding and marine structures—ships’ side scuttles (1993)

31.

ISO 3903: Shipbuilding and Marine Structures—Ships’ Ordinary Rectangular Windows, 2nd edn (1993)

32.

Keller, H., Howard, M., Hoyer, J.: Weldbonding an Improvement, Theoretically and Practically. Swissbonding, Rapperswil (2006)

33.

Kelly, G.: Load transfer in hybrid (bonded/bolted) composite single-lap joints. Compos. Struct. 69, 35–43 (2005)CrossRef

34.

Le Lan, J.Y., Livory, P., Parnelix, P.: Steel/composite bonding principle used in the connection of composite superstructure to a metal hull. In: Proceedings of SANDWICH2, Gainesville, USA (1992)

35.

Lervik, A., Mayorca, P.: Benchmark study of INCA panels with studs. In: Weitzenböck, J.R., Grafton, T. (eds.) Assessment of the INCA Steel-Concrete-Steel Sandwich Technology—Public Report. DNV Technical Report No. 2010-1284 (2010)

36.

Marsh, G.: Boeing’s 787: trials, tribulations, and restoring the dream. http://www.reinforcedplastics.com/view/4282/boeings-787-trials-tribulations-and-restoring-the-dream/ (2009). Accessed 31 Aug 2010

37.

McGeorge, D., Lilleborge, J., Høyning, B., Eliassen, G.: Survivable composite sandwich superstructures for naval applications. In: Proceedings of the SANDWICH’6, Fort Lauderdale, USA (2003)

38.

McGeorge, D.: On the long term properties of steel-composite interfaces for marine applications. Presented at the fourth international conference on composite materials for offshore operations, Houston TX, USA, 2005

39.

McGeorge, D., Høyning, B., Nordhammar, H.: Lightweight composite sandwich RoPax superstructure. In: Papanikolau, A. (ed.) Risk-Based Ship Design. Springer, Berlin (2009)

40.

McGeorge, D.: Inelastic fracture of adhesively bonded overlap joints. Eng. Fract. Mech. 77, 1–21 (2010). doi:10.1016/j.engfracmech.2009.07.002

41.

McGeorge, D.: Predicting failure of bonded structural joints. In: Weitzenböck, J.R. (ed.) Using Adhesives in Marine Engineering (2011) (to be published)

42.

Menges, G., Schmidt, P.: Untersuchungen zum Langzeitverhalten kombinierter Kleb-Punktschweisßerbindungen (Investigations into the Long-Time Behaviour of Combined Bonded and Spot Welded). Schweissen und Schneiden, 19 pp (1967)

43.

Osnes, H., McGeorge, D.: Experimental and analytical strength analysis of double-lap joints for marine applications. Compos. Part B Eng. 40(1), 29–40 (2009)CrossRef

44.

Peck, S.J.: Streamlining automated processes for composite airframe manufacturing. JEC Compos. Mag. June–July(58), 34–36 (2010)

45.

Reinhardt, K.G.: Festigkeitseigenschaften und Gesichtspunkte für die Bemessung von Punktschweiß-Klebverbindung. ZIS Mitteilungen 10, 1609–1628 (1968)

46.

Ritter, G.W., Speth, D.R., Yang, Y.P.: Qualification of adhesives for marine composite-to-steel bonded applications. J. Ship Prod. 25, 198–205 (2009)

47.

Ruttge, H.: Vorteile durch Einsatz des Punktschweißklebeberfahrens beim Herstellen von Ladebordwänden. Schweißtechnik 19, 167–169 (1969)

48.

Shenoi, R.A., Hawkins, G.L.: Practical design of joints and attachments. Compos. Mater. Marit. Struct. 2, 28 (1993)

49.

Speth, D., Yang, Y.P., Ritter, G.: Qualification of adhesives for marine composite-to-steel applications. Int. J. Adhesion Adhesives 30, 55–62 (2010)CrossRef

50.

Wacker, G., Brügge, D., Fach, K., Franzelius, W.: Theory and practice: requirements for adhesive bonding in marine structures. Proc. Inst. Mech. Eng. Part M J. Eng. Marit. Environ. 218(M4), 217–226 (2004)

51.

Weitzenböck, J.R., McGeorge, D.: The designer’s dilemma: how to deal with the uncertainty about the long-term performance of adhesively bonded joints. Proc. Inst. Mech. Eng. Part M J. Eng. Marit. Environ. 218(4), 273–276 (2004)

52.

Weitzenböck, J.R., McGeorge, D.: BONDSHIP Project Guidelines, 254 pp (2005)

53.

Weitzenböck, J.R.: Adhesive Bonding in the Maritime and Offshore Industry. Swissbonding, Rapperswil (2009)

54.

Weitzenböck, J.R., Grafton, T.: Assessment of the INCA steel-concrete-steel sandwich technology—public report. DNV Technical Report No. 2010-1284 (2010)

55.

Weitzenböck, J.R. (ed.) (2011) Using adhesives in marine engineering (to be published)

Titel: Science and Technology of Bolt-Adhesive Joints
verfasst von: Jan R. Weitzenböck
Dag McGeorge
Verlag: Springer Berlin Heidelberg
Buch: Hybrid Adhesive Joints
Print ISBN: 978-3-642-16622-8

Electronic ISBN: 978-3-642-16623-5

Copyright-Jahr: 2011
DOI: https://doi.org/10.1007/8611_2011_54

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht