nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Stationary Shoulder Friction Stir Processing: A Low Heat Input Grain Refinement Technique for Magnesium Alloy

verfasst von : Vivek Patel, Wenya Li, Quan Wen, Yu Su, Na Li

Erschienen in: Friction Stir Welding and Processing X

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Stationary shoulder friction stir processing (SSFSP) as a low heat input grain refinement technique is projected in this study. SSFSP can be considered as a variant of friction stir processing (FSP) with modified tooling system. It uses stationary shoulder tool and rotating probe, which helps to reduce heat input in great manner during process. Present work aims to refine grain size in thick AZ31B magnesium alloy using SSFSP without using external cooling at different tool rotational speeds (700–1300 rpm). The smooth surface with little flash without any defect was obtained in all the samples, which had confirmed the wide processing range of SSFSP. Probe-dominated stir zone (SZ) achieved for all rotational speeds, which confirmed smaller temperature gradient throughout the SZ thickness. SZ produced at the lowest rotational speed (700 rpm) exhibited reduction in grain size and subsequently enhancement in mechanical properties (hardness and tensile).

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Achieving Forced Mixing in Cu-Based Immiscible Alloys via Friction Stir Processing

Nächstes Kapitel Friction Stir Processing (FSP) of Multiwall Carbon Nanotubes and Boron Carbide Reinforced Aluminum Alloy (Al 5083) Composites

Nene SS, Liu K, Frank M, Mishra RS, Brennan RE, Cho KC, Li Z, Raabe D (2017) Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy. Sci Rep 7(1):161–167. https://doi.org/10.1038/s41598-017-16509-9CrossRef

Komarasamy M, Mishra RS, Baumann JA, Grant G, Hovanski Y (2013) Processing, microstructure and mechanical property correlation in Al-B4C surface composite produced via friction stir processing. In: Friction stir welding and processing VII. Springer, pp 39–46

Ma ZY, Feng AH, Chen DL, Shen J (2018) Recent advances in friction stir welding/processing of aluminum alloys: microstructural evolution and mechanical properties. Crit Rev Solid State Mater Sci 43(4):269–333. https://doi.org/10.1080/10408436.2017.1358145CrossRef

Patel VV, Li WY, Vairis A, Badheka VJ (2018) Recent development in friction stir processing as a solid-state grain refinement technique: microstructural evolution and property enhancement. Crit Rev Solid State Mater Sci (In Press)

Mishra RS, Mahoney M, McFadden S, Mara N, Mukherjee A (1999) High strain rate superplasticity in a friction stir processed 7075 Al alloy. Scripta Mater 42(2):163–168CrossRef

Patel VV, Badheka V, Kumar A (2016) Influence of friction stir processed parameters on superplasticity of Al–Zn–Mg–Cu alloy. Mater Manuf Process 31(12):1573–1582. https://doi.org/10.1080/10426914.2015.1103868CrossRef

Patel VV, Badheka V, Kumar A (2017) Effect of polygonal pin profiles on friction stir processed superplasticity of AA7075 alloy. J Mater Process Technol 240:68–76. https://doi.org/10.1016/j.jmatprotec.2016.09.009CrossRef

Patel VV, Badheka V, Kumar A (2016) Friction stir processing as a novel technique to achieve superplasticity in aluminum alloys: process variables, variants, and applications. Metallogr Microstruct Anal 5(4):278–293CrossRef

Rathee S, Maheshwari S, Siddiquee AN, Srivastava M (2017) A review of recent progress in solid state fabrication of composites and functionally graded systems via friction stir processing. Crit Rev Solid State Mater Sci 1–33. https://doi.org/10.1080/10408436.2017.1358146CrossRef

10.

Jesus JS, Costa JM, Loureiro A, Ferreira JM (2017) Fatigue strength improvement of GMAW T-welds in AA 5083 by friction-stir processing. Int J Fatigue 97(Supp C):124–134. https://doi.org/10.1016/j.ijfatigue.2016.12.034CrossRef

11.

Yang K, Li WY, Niu PL, Yang XW, Xu YX (2018) Cold sprayed AA2024/Al2O3 metal matrix composites improved by friction stir processing: microstructure characterization, mechanical performance and strengthening mechanisms. J Alloy Compd 736:115–123. https://doi.org/10.1016/j.jallcom.2017.11.132CrossRef

12.

Yang K, Li WY, Huang CJ, Yang XW, Xu YX (2018) Optimization of cold-sprayed AA2024/Al2O3 metal matrix composites via friction stir processing: effect of rotation speeds. J Mater Sci Technol 34(11):2167–2177. https://doi.org/10.1016/j.jmst.2018.03.016CrossRef

13.

Alavi Nia A, Omidvar H, Nourbakhsh SH (2014) Effects of an overlapping multi-pass friction stir process and rapid cooling on the mechanical properties and microstructure of AZ31 magnesium alloy. Mater Des 58(Supp C):298–304. https://doi.org/10.1016/j.matdes.2014.01.069CrossRef

14.

Darras B, Kishta E (2013) Submerged friction stir processing of AZ31 Magnesium alloy. Mater Des 47(Supp C):133–137. https://doi.org/10.1016/j.matdes.2012.12.026CrossRef

15.

Chang CI, Du XH, Huang JC (2008) Producing nanograined microstructure in Mg–Al–Zn alloy by two-step friction stir processing. Scripta Mater 59(3):356–359. https://doi.org/10.1016/j.scriptamat.2008.04.003CrossRef

16.

Zhou Z, Yue Y, Ji S, Li Z, Zhang L (2017) Effect of rotating speed on joint morphology and lap shear properties of stationary shoulder friction stir lap welded 6061-T6 aluminum alloy. Int J Adv Manuf Technol 88(5–8):2135–2141CrossRef

17.

Wen Q, Li WY, Wang WB, Wang FF, Gao YJ, Patel V (2018) Experimental and numerical investigations of bonding interface behavior in stationary shoulder friction stir lap welding. J Mater Sci Technol (In Press). https://doi.org/10.1016/j.jmst.2018.09.028CrossRef

18.

Ji S, Meng X, Liu J, Zhang L, Gao S (2014) Formation and mechanical properties of stationary shoulder friction stir welded 6005A-T6 aluminum alloy. Mater Des 1980–2015(62):113–117CrossRef

19.

Yuan W, Mishra RS, Carlson B, Mishra R, Verma R, Kubic R (2011) Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy. Scripta Mater 64(6):580–583CrossRef

20.

Yuan W, Mishra RS (2012) Grain size and texture effects on deformation behavior of AZ31 magnesium alloy. Mater Sci Eng 558(Supp C):716–724. https://doi.org/10.1016/j.msea.2012.08.080CrossRef

Titel: Stationary Shoulder Friction Stir Processing: A Low Heat Input Grain Refinement Technique for Magnesium Alloy
verfasst von: Vivek Patel
Wenya Li
Quan Wen
Yu Su
Na Li
Verlag: Springer International Publishing
Buch: Friction Stir Welding and Processing X
Print ISBN: 978-3-030-05751-0

Electronic ISBN: 978-3-030-05752-7

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-05752-7_20

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht