nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

12. Mathematical Modeling and Numerical Simulation of Fixtures for Fork-Type Parts Manufacturing

verfasst von : Vitalii Ivanov, Ivan Pavlenko, Ivan Kuric, Mykyta Kosov

Erschienen in: Industry 4.0: Trends in Management of Intelligent Manufacturing Systems

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The chapter presents the mathematical models of free and forced oscillations of the comprehensive mechanical system “fixture–workpiece” describing the proposed adjustable locating-and-clamping module with a high level of flexibility for providing CNC multiaxis machining operation. With the aim to increase the fixture rigidity and detuning from a resonance mode, the eigenfrequencies and maximum displacements are determined using the numerical simulation model realized by the ANSYS software. The proposed mathematical model is proved by the results of numerical simulation on the example of fork-type parts considering contact stiffness of functional elements and values of clamping and cutting forces and moments. As a result, the advantage of the proposed manufacturing process in comparison on the typical one is justified. Particularly, the first eigenfrequency for the proposed manufacturing process is 1.64 times more than the same frequency for the typical manufacturing process. Additionally, the rigidity of a new fixture design is significantly increased, as well as detuning from a resonance mode is ensured. The proposed methodology allows estimating physical parameters of the proposed mathematical model by the results of numerical simulation and experimental research for ensuring dynamic stability of the highly complicated mechanical system “CNC machine tool–flexible fixture–spatial workpiece–precise cutting tool.”

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Information System for Computer-Aided Fixture Design

Bi, Z. M., & Zhang, W. J. (2001). Flexible fixture design and automation: Review, issues and future directions. International Journal of Production Research, 39, 2867–2894. https://doi.org/10.1080/00207540110054579.CrossRef

Trojanowska, J., Kolinski, A., Galusik, D., et al. (2018). A methodology of improvement of manufac-turing productivity through increasing operational efficiency of the production process. In A. Hamrol, O. Ciszak, S. Legutko, & M. Jurczyk (Eds.), Advances in Manufacturing (pp. 23–32). New York: Springer. https://doi.org/10.1007/978-3-319-68619-6_3.CrossRef

Gameros, A., Axinte, D., Siller, H. R., et al. (2017). Experimental and numerical study of a fixturing system for complex geometry and low stiffness components. Journal of Manufacturing Science and Engineering, 139(4), 045001-01–045001-12. https://doi.org/10.1115/1.4034623.CrossRef

Gothwal, S., & Raj, T. (2017). Different aspects in design and development of flexible fixtures: Review and future directions. International Journal of Services and Operations Management, 26(3), 386–410. https://doi.org/10.1504/IJSOM.2017.081944.CrossRef

Ansaloni, M., Bonazzi, E., Leali, F., et al. (2013). Design of fixture systems in automotive manufac-turing and assembly. Advanced Materials Research, 712-715, 2913–2916. https://doi.org/10.4028/www.scientific.net/AMR.712-715.2913.CrossRef

Forstmann, R., Wagner, J., Kreiskother, K., et al. (2017). Design for automation: The rapid fixture approach. Procedia Manufacturing, 11, 633–640. https://doi.org/10.1016/j.promfg.2017.07.161.CrossRef

Karpus, V. E., & Ivanov, V. A. (2012). Choice of the optimal configuration of modular reusable fixtures. Russian Engineering Research, 32(3), 213–219. https://doi.org/10.3103/S1068798X12030124.CrossRef

Pehlivan, S., & Summers, J. (2008). A review of computer-aided fixture design with respect to infor-mation support requirements. International Journal of Production Research, 46(4), 929–947. https://doi.org/10.1080/00207540600865386.CrossRefMATH

Boyle, I., Rong, Y., & Brown, D. (2011). A review and analysis of current computer-aided fixture de-sign approaches. International Journal of Robotics and Computer-Integrated Manufacturing, 27(1), 1–12. https://doi.org/10.1016/j.rcim.2010.05.008.CrossRef

10.

Bakker, O. J., Papastathis, T. N., Ratchev, S. M., & Popov, A. A. (2013). Recent research on flexible fixtures for manufacturing processes. Recent Patents on Mechanical Engineering, 6(2), 107–121. https://doi.org/10.2174/2212797611306020003.CrossRef

11.

Tohidi, H., & AlGeddawy, T. (2016). Planning of modular fixtures in a robotic assembly system. Pro-cedia CIRP, 41, 252–257. https://doi.org/10.1016/j.procir.2015.12.090.CrossRef

12.

Hui, L., Weifang, C., & Shengjie, S. (2016). Design and application of flexible fixture. Procedia CIRP, 56, 528–532. https://doi.org/10.1016/j.procir.2016.10.104.CrossRef

13.

Posindu, B. A., Janaka, E. B., Kasun, D. T., et al. (2017). A novel fixturing system for complex shaped components. In IEEE (Ed.), 2017 Moratuwa Engineering Research Conference (pp. 221–224). Moratuwa: IEEE. https://doi.org/10.1109/MERCon.2017.7980485.CrossRef

14.

Mohring, H.-C., Gessler, W., Konig, A., et al. (2017). Modular intelligent fixture system for flexible clamping of large parts. Journal of Machine Engineering, 17(4), 29–39. https://doi.org/10.5604/01.3001.0010.7003.CrossRef

15.

Erdem, I., Levandowski, C., Berlin, C., et al. (2017). A novel comparative design procedure for re-configurable assembly fixtures. CIRP Journal of Manufacturing Science and Technology, 19, 93–105. https://doi.org/10.1016/j.cirpj.2017.06.004.CrossRef

16.

Gothwal, S., & Raj, T. (2018). Conceptual design and development of pneumatically controlled flexible fixture and pallets. International Journal of Services and Operations Management, 29(2), 147–162. https://doi.org/10.1504/IJSOM.2018.089246.CrossRef

17.

Ivanov, V., & Zajac, J. (2018). Flexible fixtures for CNC machining centers in multiproduct manufacturing. EAI Endorsed Transactions on Industrial Networks and Intelligent Systems, 4(12), e4. https://doi.org/10.4108/eai.10-1-2018.153552.CrossRef

18.

Liao, Y., & Hu, S. (2001). An integrated model of a fixture – workpiece system for surface quality prediction. International Journal of Advanced Manufacturing Technology, 17(11), 810–818. https://doi.org/10.1007/s001700170108.CrossRef

19.

Kumbhar, N., et al. (2012). Finite element modelling and analysis of workpiece – fixture system. International Journal of Applied Research in Mechanical Engineering, 2(2), 60–65.

20.

Kang, Y., et al. (2003). Computer-aided fixture design verification. Part 3. Stability analysis. The International Journal of Advanced Manufacturing Technology, 21(10), 842–849. https://doi.org/10.1007/s00170-002-1401-4.CrossRef

21.

Asante, J. N. (2010). Effect of fixture compliance and cutting conditions on workpiece stability. The International Journal of Advanced Manufacturing Technology, 48(1), 33–43. https://doi.org/10.1007/s00170-009-2284-4.CrossRef

22.

Cioata, V., & Kiss, I. (2009). The machining error due to contact deformation of workpiece—fixture system. Acta Technica Corviniensis – Bulletin of Engineering, 2(1), 33–36.

23.

Zheng, Y. (2005). Finite element analysis for fixture stiffness. PhD Thesis. Worcester: Worcester Polytechnic Institute.

24.

Asada, H., & By, A. (1985). Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures. IEEE Journal on Robotics and Automation, 1(2), 86–94. https://doi.org/10.1109/JRA.1985.1087007.CrossRef

25.

Rong, Y., & Bai, Y. (1997). Automated generation of fixture configuration design. Journal of Manufacturing Science and Engineering, 119(2), 208–219. https://doi.org/10.1115/1.2831097.CrossRef

26.

Chou, Y. C. (1993). Automated fixture design for concurrent manufacturing planning. Concurrent Engineering, 1(4), 219–229. https://doi.org/10.1177/1063293X9300100405.CrossRef

27.

Wu, Y., et al. (1997). Automated generation of dedicated fixture design. International Journal Computer Application in Technologies, 10(3–4), 213–235. https://doi.org/10.1504/IJCAT.1997.062249.CrossRef

28.

Trappey, A. J. C., et al. (1995). Computer-aided fixture analysis using finite element analysis and mathematical optimization modeling. Journal of Manufacturing Science and Engineering, 2-1, 777–787.

29.

Deng, H. (2006). Analysis and synthesis of fixturing dynamic stability in machining accounting for material removal effect. Ph.D. Thesis. Atlanta: Georgia Institute of Technology.

30.

Pavlenko, I., Trojanowska, J., Ivanov, V., & Liaposhchenko, O. (2019). Scientific and methodological approach for the identification of mathematical models of mechanical systems by using artificial neural networks. In: Machado J., Soares F., Veiga G. (eds.) Innovation, Engineering and Entrepreneurship. HELIX 2018. Lecture Notes in Electrical Engineering, 2019, 505, 299–306. https://doi.org/10.1007/978-3-319-91334-6_41.

31.

Slabbert, E., Walker, A., Bright, G. (2017). Modal analysis of machining processess on an automated flexible fixture for a reconfigurable manufacturing system. In: 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). IEEE. doi: https://doi.org/10.1109/M2VIP.2017.8211498.

32.

Ivanov, V., Pavlenko, I. (2018). Comprehensive approach for mathematical modeling of mechanical systems: Fixture design case study. In: Knapcikova L., Balog M. (eds.) Proceedings of 2nd EAI Int. Conf. on Management of Manufacturing Systems, MMS-2017, pp. 1–19. doi: https://doi.org/10.4108/eai.22-11-2017.2274154.

33.

Ivanov, V., & Pavlenko, I. (2018). Fundamental approach for analysis of dynamic characteristics of fixtures. EAI Endorsed Transactions on Industrial Networks and Intelligent Systems, 4(13), e1. https://doi.org/10.4108/eai.20-3-2018.154366.CrossRef

34.

Pavlenko, I., Simonovskiy, V., Ivanov, V. et al. (2019). Application of artificial neural network for identification of bearing stiffness characteristics in rotor dynamics analysis. In: Ivanov V. et al. (eds.) Advances in Design, Simulation and Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering, 2019, pp. 325–335. doi: https://doi.org/10.1007/978-3-319-93587-4_34.

Titel: Mathematical Modeling and Numerical Simulation of Fixtures for Fork-Type Parts Manufacturing
verfasst von: Vitalii Ivanov
Ivan Pavlenko
Ivan Kuric
Mykyta Kosov
Verlag: Springer International Publishing
Buch: Industry 4.0: Trends in Management of Intelligent Manufacturing Systems
Print ISBN: 978-3-030-14010-6

Electronic ISBN: 978-3-030-14011-3

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-14011-3_12

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten