nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

The Effect of Dimple Distortions on Surface Topography Analysis

verfasst von : Przemysław Podulka

Erschienen in: Advances in Manufacturing II

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper the influence of improper selection of reference plane on dimples distortions was taken into consideration. The effect of application of various procedures (cylinder fitting algorithm; polynomial approximation; digital filtering: regular Gaussian regression filter, Robust Gaussian regression filter) were compared and discussed. Plateau-honed cylinder liner surfaces were studied (more than 20 measured and/or 20 with digitally added dimples surfaces were studied). They were measured by stylus instrument Talyscan 150 or white light interferometer Talysurf CCI Lite. The influence of usage of commonly applied algorithms on surface topography parameters (from ISO 25178 standard) was also taken into account. It was assumed that dimples distortion is of a great importance for calculation of surface topography parameters (especially of Sk parameters) of plateau-honed cylinder liners with additionally added oil pockets created by burnishing techniques. False estimation of areal form removal procedure can cause of classification of properly made parts as a lack and its rejection. The dimples size (width D_W and depth D_D) was also taken into consideration for proposal of selection of areal form removal procedure.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Influence of Cutting Conditions in the Topography of Texturized Surfaces on Aluminium 7075 Plates Produced by Robot Machining

Nächstes Kapitel Errors of Surface Topography Parameter Calculation in Grinded or Turned Details Analysis

Blunt L, Jiang X (eds) (2003) Advanced techniques for assessment of surface topography. Kogan Pages, London

Podulka P, Pawlus P, Dobrzański P, Lenart A (2014) Spikes removal in surface measurement. J Phys: Conf Ser 483(1):012025

Stout KJ (ed) (1994) Three-dimensional surface topography – measurement, interpretation and application. Penton Press, London

Thomas TR (1999) Rough surfaces, 2nd edn. Imperial College Press, London

Miller T, Adamczak S, Świderski J, Wieczorowski M, Łętocha A, Gapiński B (2017) Influence of temperature gradient on surface texture measurements with the use of profilometry. Bull Pol Acad Sci Tech Sci 65(1):53–62

Magdziak M (2016) An algorithm of form deviation calculation in coordinate measurements of free-form surfaces of products. Strojniški Vestnik - J Mech Eng 62(1):51–59CrossRef

Wdowik R, Magdziak M, Porzycki J (2014) Measurements of surface roughness in ultrasonic assisted grinding of ceramic materials. Appl Mech Mater 627:191–196CrossRef

Magdziak M (2017) The influence of a number of points on results of measurements of a turbine blade. Aircr Eng Aerosp Technol 89(6):953–959CrossRef

Forbes AB (1989) Least squares best fit geometric elements. NLP report DITC 40 (89), Teddington, UK

10.

Podulka P, Dobrzański P, Pawlus P, Lenart A (2014) The effect of reference plane on values of areal surface topography parameters from cylindrical elements. Metrol Meas Syst 21(2):247–256CrossRef

11.

Janecki D (2011) Gaussian filters with profile extrapolation. Precis Eng 35(4):602–606CrossRef

12.

Brinkmann S, Bodschwinna H, Lemke H-W (2001) Accessing roughness in three-dimensions using Gaussian regression filtering. Int J Mach Tools Manuf 41(13–14):2153–2161CrossRef

13.

Brinkman S, Bodschwinna H (2000) Advanced gaussian filters. In: Advanced techniques for assessment surface topography. Elsevier

14.

Lou S, Jiang X, Scott PJ (2014) Applications of morphological operations in surface metrology and dimensional metrology. J Phys Conf Ser 483:012020CrossRef

15.

Muralikrishnan B., Raja J (2009) Computational surface and roundness metrology. Springer

16.

De Chiffre L, Lonardo P, Trumpold H, Lucca DA, Goch G, Brown CA, Raja J, Hansen HN (2000) Quantitative characterization of surface texture. CIRP Ann Manuf Technol, 49(2):635–642, 644–652

17.

Mainsah E, Greenwood JA, Chetwynd DG (2001) Metrology and properties of engineering surfaces. Springer, LondonCrossRef

18.

Brown CA, Hansen HN, Jiang XJ, Blateyron F, Berglund J, Senin N, Bartkowiak T, Dixon B, Le Goic G, Quinsat Y, Stemp WJ, Thompson MK, Ungar PS, Zahouani EH (2018) Multiscale analyses and characterizations of surface topographies. CIRP Ann 67(2):839–862CrossRef

19.

Jeng Y (1996) Impact of plateaued surfaces on tribological performance. Tribol Trans 39(2):354–356CrossRef

20.

Godi A, Grønbæk J, De Chriffre L (2017) Characterisation and full-scale production testing of multifunctional surfaces for deep drawing applications. CIRP J Manuf Sci Technol 16:64–71CrossRef

21.

Podulka P (2018) Problem of selection of reference plane with deep and wide valleys analysis. J Phys Conf Ser 1065:072017CrossRef

22.

Whitehouse DJ (2010) Handbook of surface and nanometrology. CRC Press, Boca Raton

23.

Forbes AB (2013) Areal form removal. In: Leach RK (ed) Characterisation of areal surface texture. Springer, pp 107–128

24.

Podulka P (2018) Proposal of edge-area form removal of cylindrical surfaces containing wide dimples by application of various robust processing techniques. J Phys Conf Ser 1065:072018CrossRef

25.

Podulka P (2019) Edge-area form removal of two-process surfaces with valley excluding method approach. In: MATEC web of conferences, vol 252, p 05020CrossRef

26.

Stout KJ, Sullivan PJ, Dong WP, Mainsah E, Luo N, Mathia T, Zahouani EH (1993) Publication EUR 15178 EN Commission of the European Communities

27.

Podulka P (2016) Selection of reference plane by the least squares fitting methods. Adv Sci Technol Res J 10(30):164–175CrossRef

28.

Podulka P (2018) The effect of valley location in two-process surface topography analysis. Adv Sci Technol Res J 12(4):97–102CrossRef

29.

Yuan Y-B, Qiang X-F, Song J-F, Vorburger TV (2000) A fast algorithm for determining the Gaussian filter mean line in surface metrology. Precis Eng 24(1):62–69CrossRef

30.

Dobrzański P, Pawlus P (2013) Modification of robust filtering of stratified surface topography. Metrol Meas Syst 20(1):107–118CrossRef

Titel: The Effect of Dimple Distortions on Surface Topography Analysis
verfasst von: Przemysław Podulka
Verlag: Springer International Publishing
Buch: Advances in Manufacturing II
Print ISBN: 978-3-030-18681-4

Electronic ISBN: 978-3-030-18682-1

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-18682-1_10

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht