nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

7. Future Research Direction in Friction Welding, Friction Stir Welding and Friction Stir Processing

verfasst von : Esther Titilayo Akinlabi, Rasheedat Modupe Mahamood

Erschienen in: Solid-State Welding: Friction and Friction Stir Welding Processes

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Friction welding, friction stir welding an friction stir processing have been used extensively in various applications. The areas of application of these solid-state welding and processing keep expanding with the help of research advances in the technology. For example, some of the limitation of friction stir welding, which was only used to weld low melting alloys, has been overcome to a large extent as a result of research in material development. More work is still needed in terms of research to further advance these technologies and bring about the needed improvement in each of these processes. This chapter presents the future research direction that is required to further improve friction welding, friction stir welding and friction processing. Fourth Industrial Revolution is here, a number of manufacturing processes have evolved over the years and have to position themselves for this industrial revolution and friction stir welding is one of such manufacturing processes. The role of cloud computing in friction stir welding for the Fourth Industrial Revolution is also reviewed in this section.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Friction Stir Processing Technology: A Case Study

R.S. Mishra, Z.Y. Ma, Mater. Sci. Eng., R 50, 1–78 (2005)CrossRef

P.L. Threadgill, A.J. Leonard, H.R. Shercliff, P.J. Withers, Int. Mater. Rev. 54, 49–93 (2009)CrossRef

F. Rotundo, A. Marconi, A. Morri, A. Ceschini, Dissimilar linear friction welding between a SiC particle reinforced aluminum composite and a monolithic aluminum alloy: microstructural, tensile and fatigue properties. Mater. Sci. Eng., A 559, 852–860 (2013). https://doi.org/10.1016/j.msea.2012.09.033CrossRef

M. Grujicic, G. Arakere, B. Pandurangan, C.F. Yen, B.A. Cheeseman, Process modeling of Ti-6Al-4V linear friction welding (LFW). J. Mater. Eng. Perform. 21, 2011–2023 (2011). https://doi.org/10.1007/s11665-011-0097-8?ASMCrossRef

M.Y. Xie, T.S. Jun, A.M. Korsunsky, M. Drakopoulos, Analysis of preferred orientations in linear friction welded (LFW) aluminium alloy specimens using ‘‘one-shot” multi-element energy dispersive synchrotron X-ray diffraction. Powder Diffr. 28, 327–332 (2013). https://doi.org/10.1017/S0885715613000948CrossRef

A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, S. Yue, Mechanical property and microstructure of linear friction welded WASPALOY. Metall. Mater. Trans. A 42, 729–744 (2010). https://doi.org/10.1007/s11661-010-0457-2CrossRef

P. Wanjara, E. Dalgaard, G. Trigo, C. Mandache, G. Comeau, J.J. Jonas, Linear friction welding of Al–Cu: Part 1—Process evaluation. Can. Metall. Q. 50, 350–359 (2011). https://doi.org/10.1179/000844311X13112418194644CrossRef

J.P. Bergmann, F. Petzoldt, R. Schürer, S. Schneider, Solid-state welding of aluminum to copper—case studies. Weld. World 57, 541–550 (2013). https://doi.org/10.1007/s40194-013-0049-zCrossRef

J.D. Robson, S. Cui, Z.W. Chen, Mater. Sci. Eng., A 527, 7299–7304 (2010)

10.

T.H. North, G.J. Bendzsak, A. Gerlich, P. Su, G. Cingara, Mater. Sci. Forum 539–543, 3826–3831 (2007)CrossRef

11.

S. Papaefthymiou, C. Goulas, E. Gavalas, Micro-friction stir welding of titan zinc sheets. J. Mater. Process. Technol. 216, 133–139 (2015). https://doi.org/10.1016/j.jmatprotec.2014.08.029CrossRef

12.

K. Panneerselvam, K. Lenin, Joining of Nylon 6 plate by friction stir welding process using threaded pin profile. Mater. Des. 302–307 (2014). http://dx.doi.org/10.1016/j.matdes.2013.07.017CrossRef

13.

H. Ahmadi, N.B. Mostafa Arab, F. Ashenai Ghasemi, R. Eslami Farsani, Influence of pin profile on quality of friction stir lap welds in carbon fiber reinforced polypropylene composite. Int. J. Mech. Appl. 2(3), 24–28 (2012). http://dx.doi.org/10.5923/j.mechanics.20120203.01CrossRef

14.

I. Galvão, R.M. Leal, A. Loureiro, D.M. Rodrigues, Material flow in heterogeneous friction stir welding of aluminium and copper thin sheets. Sci. Technol. Weld. Join. 654–660 (2010). http://dx.doi.org/10.1179/136217110X12785889550109CrossRef

15.

A. Scialpi, L.A.C. De Filippis, P. Cuomob, P. Di Summa, Micro friction stir welding of 2024–6082 aluminium alloys. Weld. Int. 16–22 (2008). http://dx.doi.org/10.1080/09507110801936069CrossRef

16.

R.M. Leal, C. Leitão, A. Loureiro, D.M. Rodriguesa, P. Vilaça, Material flow in heterogeneous friction stir welding of thin aluminium sheets: effect of shoulder geometry. Mater. Sci. Eng. 384–391 (2008). http://dx.doi.org/10.1016/j.msea.2008.08.018CrossRef

17.

D.M. Rodrigues, A. Loureiro, C. Leitão, R.M. Leal, B.M. Chaparro, P. Vilaça, Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds. Mater. Des. 1913–1921 (2009). http://dx.doi.org/10.1016/j.matdes.2008.09.016CrossRef

18.

C. Leitão, R.M. Leal, D.M. Rodrigues, A. Loureiro, P. Vilaça, Mechanical behaviour of similar and dissimilar AA5182-H111 and AA6016-T4 thin friction stir welds. Mater. Des. 101–108 (2009). http://dx.doi.org/10.1016/j.matdes.2008.04.045CrossRef

19.

E. Cerri, P. Leo, Warm and room temperature deformation of friction stir welded thin aluminium sheets. Mater. Des. 31, 1392–1402 (2010). https://doi.org/10.1016/j.matdes.2009.08.044CrossRef

20.

K. Sithole, V.R. Veeredhi, Recent developments in micro friction stir welding—a review, in Accepted for presentation at the 2nd International Manufacturing Engineering Conference (iMEC 2015), Kuala Lumpur, Malaysia (2015)

21.

E.T. Akinlabi, R.M. Mahamood, S.A. Akinlabi, E. Ogunmuyiwa, Processing parameters influence on wear resistance behaviour of friction stir processed Al-TiC composites. Adv. Mater. Sci. Eng. (2014). http://www.hindawi.com/journals/amse/2014/724590/

22.

A. Fehrenbacher, N.A. Duffie, N.J. Ferrier, F.E. Pfefferkorn, M.R. Zinn, Effects of tool-workpiece interface temperature on weld quality and quality improvements through temperature control in friction stir welding. Int. J. Adv. Manuf. Technol. 71, 165–179 (2014)CrossRef

23.

X. Deng, X. Shaowen, Two-dimensional finite element simulation of material flow in the friction stir welding process. J. Manuf. Process. 6, 125–133 (2004)CrossRef

24.

S. Tutunchilar, M.K. Besharati Givi, M. Haghpanahi, P. Asadi, Eutectic Al-Si piston alloy surface transformed to modified hypereutectic alloy via FSP. Mater. Sci. Eng. A 534, 557–567 (2012)CrossRef

25.

A. Dolatkhah, P. Golbabaei, M.K. Besharati Givi, F. Molaiekiya, Investigating effects of process factors on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing. Mater. Des. 37, 458–464 (2012)CrossRef

26.

M. Salehi, M. Saadatmand, J. Aghazadeh Mohandesi, Optimization of process factors for producing AA6061/SiC nanocomposites by friction stir processing. Trans. Nonfer. Met. Soc. China 22, 1055–1063 (2012)

27.

D.-H. Choi, Y.-I. Kim, D.-U. Kim, S.-B. Jung, Effect of SiC particles on microstructure and mechanical property of friction stir processed AA6061-T4. Trans. Nonfer. Met. Soc. China 22, 614–618 (2012)CrossRef

28.

D. Aruri, K. Adepu, K. Adepu, K. Bazavada, Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC + Gr) and (SiC + Al₂O₃)] fabricated by friction processing. J. Mater. Res. Technol. 362–369 (2013)

29.

R. Dhayalan, K. Kalaiselvan, R. Sathiskumar, Characterization of AA6063/SiC-Gr surface composites produced by FSP technique. Procedia Eng. 97, 625–631 (2014)CrossRef

30.

K. Schwab, The Fourth Industrial Revolution (Crown Publishing, New York, 2016)

31.

V. Smil, Creating the 20th Century: Technical Innovations of 1867–2014 and Their Lasting Impact (Oxford University Press, New York, 2005)CrossRef

32.

T. Hughes, Technology as second creation, in Human Built World (University of Chicago Press, London, 2004), pp. 17–43

33.

R. Chaâri, F. Ellouze, A. Koubâa, B. Qureshi, N. Pereira, H. Youssef, E. Tovar, Cyber-physical systems clouds: a survey. Comput. Netw. 108, 260–278 (2016)CrossRef

34.

A.W. Colombo, S. Karnouskos, Towards the factory of the future: a service-oriented cross-layer infrastructure, in ICT Shaping the World: A Scientific View. European Telecommunications Standards Institute (ETSI) (Wiley, 2009), pp. 65–81

35.

A.J.C. Trappey, C.V. Trappey, U.H. Govindarajan, J.J. Sun, A.C. Chuang, A review of technology standards and patent portfolios for enabling cyber-physical systems in advanced manufacturing. IEEE Access 4, 7356–7382 (2016)CrossRef

36.

R.M. Mahamood, E.T. Akinlabi, Achieving mass customization through additive manufacturing, in Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future, ed. by C. Schlick, S. Trzcieliński (Springer International Publishing, Switzerland, 2016), pp. 385–390CrossRef

37.

S. Karnouskos, Realising next-generation web service-driven industrial systems. Int. J. Adv. Manuf. Technol. 60(1–4), 409–419 (2011)

38.

S. Karnouskos, A.W. Colombo, T. Bangemann, K. Manninen, R. Camp, M. Tilly, M. Sikora, F. Jammes, J. Delsing, J. Eliasson, P. Nappey, J. Hu, M. Graf, The IMC-AESOP architecture for cloud-based industrial cyber-physical systems, in Industrial Cloud-Based Cyber-Physical Systems (Springer, May 2014), pp. 49–88

39.

A.W. Colombo, T. Bangemann, S. Karnouskos, J. Delsing, P. Stluka, R. Harrison, F. Jammes, J.L. Lastra (eds.), Industrial Cloud-based Cyber-Physical Systems: The IMC-AESOP Approach (Springer, 2014)

40.

S. Karnouskos, V. Somlev, Performance assessment of integration in the cloud of things via web services, in 2013 IEEE International Conference on Industrial Technology (ICIT), 25–28 February 2013, Cape Town, South Africa (2013). https://doi.org/10.1109/ICIT.2013.6505983

41.

A.D. Maynard, Navigating the fourth industrial revolution. Nat. Nanotechnol. 10, 1005–1006 (2015)CrossRef

42.

D. Mishra, R.B. Roy, S. Dutta, S.K. Pal, D. Chakravarty, A review on sensor based monitoring and control of friction stir welding process and a roadmap to Industry 4.0. J. Manuf. Process. 36, 373–397 (2018)CrossRef

43.

M. Armbrust, I. Stoica, M. Zaharia, A. Fox, R. Griffith, A.D. Joseph et al., A view of cloud computing. Commun. ACM 53, 50 (2010). https://doi.org/10.1145/1721654.1721672CrossRef

44.

B. Rossi, Why Cloud Technology is Central to Industry 4.0, pp. 6–8 (2018). http://www.information-age.com/cloud-technology-centralindustry-4-0-123462532/. Accessed 7 May 2018

45.

F. Bonomi, R. Milito, J. Zhu, S. Addepalli, Fog computing and its role in the internet of things, in Proceedings of the First Edition of the MCC Workshop on Mobile Cloud Computing (MCC ’12) (2012). https://doi.org/10.1145/2342509.2342513. 13

46.

A. Parrott, W. Lane, Industry 4.0 and the Digital Twin (Deloitte University Press, 2017), pp. 1–17

Titel: Future Research Direction in Friction Welding, Friction Stir Welding and Friction Stir Processing
verfasst von: Esther Titilayo Akinlabi
Rasheedat Modupe Mahamood
Verlag: Springer International Publishing
Buch: Solid-State Welding: Friction and Friction Stir Welding Processes
Print ISBN: 978-3-030-37014-5

Electronic ISBN: 978-3-030-37015-2

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-3-030-37015-2_7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten