nach oben

Erschienen in:

2016 | OriginalPaper | Buchkapitel

Several Issues of Tooth Generating Process by Two-Parametric Families of Generating Lines

verfasst von : E. Trubachev

Erschienen in: Theory and Practice of Gearing and Transmissions

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper describes methods of tooth generating by two-parametric families of generating lines (cutting tool edges) proposed for spiroid gears. Several general issues of tooth generating process by means of these families are considered.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Cause of Failure Beyond Conjugate Theory of Gear Meshing

Nächstes Kapitel Direct Gear Design for Asymmetric Tooth Gears

Stadtfeld HJ (1995) Gleason Bevel gear technology. In: Manufacturing, inspections and optimization: collected publications 1994/95. The Gleason Works, Rochester, 202 p

Davydov Ya S (1965) Generation of conjugation surfaces in gears by means of two curves. In: Analysis and synthesis of mechanisms and theory of gearing. Nauka, Moscow, pp 12–23 (in Russian)

Litvin FL (1968) Theory of gearing. Nauka, Moscow, 584 p (in Russian)

Erikhov ML (1972) Principles of systematization, analysis methods and questions of synthesis of gear schemes DSc (Engineering) Thesis. Khabarovsk, 373 p (in Russian)

Gulyaev KI (1964) Methods of generating the conjugated gearing of bevels gearwheels with cycloidal longitudinal tooth profile. Izvestiya vuzov. N12, Mashinostroyeniye, Moscow (in Russian)

Babichev DT Development of kinematic method of theory of gearing to determine areas of tooth flanks produced by jogs of generating solids, In the present volume

Trubachev ES, Semakin NN (2002) Development of the method of spiroid gearwheel machining by generating cutter. Innovative techniques in mechanical engineering and device manufacturing. In: Proceedings of international scientific technical conference dedicated to 50 anniversary of ISTU, part 2, Izhevsk, pp 327–336 (in Russian)

Trubachev ES, Zlobina PA, Loginov SE (2011) New scheme of spiroid gearwheel tooth generation. In: Intelligent systems in manufacturing, N3. ISTU Publications, Izhevsk, pp 178–184 (in Russian)

Trubachev ES, Loginov SE (2014) New method of spiroid gearwheel tooth cutting. In: Theory and practice of gearing: Proceedings of international symposium (January 21–23, Russia, Izhevsk). ISTU Publications, Izhevsk, 2013. 580 p, ISBN 978-5-7526-0629-8. pp 232–237 (in Russian)

10.

http://www.holroyd.com/holroyd-precision/machines/rotor-milling-machines.php

11.

Trubachev ES, Zubkova AI (2014) Method of cutting the threads of multi-thread cylindrical worms. In: Theory and practice of gearing: Proceedings of international symposium (January 21–23, Russia, Izhevsk). Izhevsk, ISTU Publications, 2013. 580 p, ISBN 978-5-7526-0629-8. pp 238–243 (in Russian)

12.

Goldfarb VI, Trubachev ES (2002) Development and application of computer-aided design and tooth contact analysis of spiral-type gears with cylindrical worms. Technical Paper for AGMA FTM, USA, p 17–21

13.

Litvin FL, Timofeyev BP, Rubtsov VN (1971) Synthesis of face-milled and Helixform bevel gears with circular teeth according to local conditions. Mechanics of machines, N31–32. Nauka, Moscow, pp 40–49 (in Russian)

14.

Segal MG (1972) To determination of boundaries of tooth contact pattern for bevel and hypoid gears, N4. Mashinovedeniye, Moscow, pp 61–68 (in Russian)

15.

Trubachev ES (2014) Synthesis of multi-pair loaded spiroid gear. In: Theory and practice of gearing: Proceedings of international symposium (January 21–23, 2014, Russia, Izhevsk). ISTU Publications, Izhevsk, 2013, 580 p. ISBN 978-5-7526-0629-8, pp 359–366 (in Russian)

16.

Sheveleva GI (1999) Theory of generation and contact of moving solids. Stankin, Moscow, 494 p (in Russian)

17.

Litvin FL, Fuentes A (2004) Gear geometry and applied theory, 2nd edn, 800 p, Cambridge University Press, New York

18.

Lagutin SA Analogs of axes of meshing in general type worm gearing. In the present volume

19.

Goldfarb VI, Trubachev ES, Puzanov V Yu (2009) New possibilities of non-orthogonal worm gears. In: Proceedings of the 3rd International Conference Power Transmissions 09. Greece, Chalkidiki, pp 139–145 (in Russian)

20.

Lagutin SA (1998) Synthesis and applications of general type worm gears with localized contact, Dresden (Germany): Preprint IOCOMO-06-1998, 16 p

21.

Babichev DT (2004) To application of multi-parametric enveloping in computer-aided simulation of generation processes in operating and machine-tool types of gearing. In: Theory and practice of gearing: proceedings of scientific-technical conference with international participation, Izhevsk, pp 302–315 (in Russian)

22.

Favar J (1960) Course of local differential geometry. Publishing of foreign literature, 559 p (in Russian)

Titel: Several Issues of Tooth Generating Process by Two-Parametric Families of Generating Lines
verfasst von: E. Trubachev
Verlag: Springer International Publishing
Buch: Theory and Practice of Gearing and Transmissions
Print ISBN: 978-3-319-19739-5

Electronic ISBN: 978-3-319-19740-1

Copyright-Jahr: 2016
DOI: https://doi.org/10.1007/978-3-319-19740-1_6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht