nach oben

Erschienen in:

2011 | OriginalPaper | Buchkapitel

5. Effect of Compatibilizers in WPC Composites

verfasst von : Jin Kuk Kim, Kaushik Pal

Erschienen in: Recent Advances in the Processing of Wood-Plastic Composites

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Wood-fiber (WF) filled plastic composites (WPC) have gained rapid growth in recent years. Such materials offer significant advantages, which justify their use. Wood fiber is obtained from natural resources, it is available in various forms in large quantities, light, cheap, and it can be added to commodity matrices in considerable amounts thus offering economically advantageous solutions [1‐4]. The main drawbacks of such composites are their poor adhesion to basically all matrix polymers [5, 6] and high density compared to natural wood and certain plastics [7].

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Recent Past about WPC Work

Nächstes Kapitel Flammability in WPC Composites

Bledzki, A.K., Gassan, J.: Composites reinforced with cellulose based fibres. Prog. Polym. Sci. 24(2), 221–274 (1999)CrossRef

Bledzki, A.K., Faruk, O., Huque, M.: Physico-mechanical studies of wood fiber reinforced composites. Polym. Plast. Technol. Eng. 41(3), 435–451 (2002)CrossRef

Bledzki, A.K., Letman, M., Viksne, A., Rence, L.: A comparison of compounding processes and wood type for wood fibre-PP composites. Composites A36(6), 789–797 (2005)

Ichazo, M.N., Albano, C., Gonzalez, J., Perera, R., Candal, M.V.: Polypropylene/wood flour composites: treatments and properties. Compos. Struct. 54(2–3), 207–214 (2001)CrossRef

Bledzki, A.K., Reihmane, S., Gassan, J.: Thermoplastics reinforced with wood fillers: a literature review. Polym. Plast. Technol. Eng. 37(4), 451–468 (1998)CrossRef

Bledzki, A.K., Letman, M., Viksne, A., Rence, L.: A comparison of compounding processes and wood type for wood fibre—PP composites. Compos. Part A Appl. Sci. Manuf. 36, 789–797 (2005)CrossRef

Matuana L.M., Heiden, P.A.: Wood composites. In: Kroschwitz J.I. (ed.) Encyclopedia of polymer science and technology. Wiley, New York (2004)

Hristov, V.N., Krumova, M., Vasileva, St., Michler, G.H.: Modified polypropylene wood flour composites. II. Fracture, deformation, and mechanical properties. J. Appl. Polym. Sci. 92(2), 1286–1292 (2004)CrossRef

GUO, C.G., Wang, Q.W.: Compatibilizing effect of maleic anhydride grafted styrene-ethylene-butylene-styrene (MAH-g-SEBS) on the polypropylene and wood fiber composites. J. Reinf. Plast. Compos. 26(17), 1743–1752 (2007)CrossRef

10.

Wu, J.S., Yu, D., Chan, C.M., Kim, J.G., Mai, Y.W.: Effect of fiber pretreatment condition on the interfacial strength and mechanical properties of wood fiber/PP composites. J. Appl. Polym. Sci. 76, 1000–1010 (2000)CrossRef

11.

Nitz, H., Reichert, P., Romling, H., Mulhaupt, R.: Influence of compatibilizers on the surface hardness, water uptake and the mechanical properties of poly(propylene) wood flour composites prepared by reactive extrusion. Macromol. Mater. Eng. 276, 51–58 (2000)CrossRef

12.

Danyadi, L., Janecska, T., Szabo, Z., Nagy, G., Moczo, J., Pukanszky, B.: Wood flour filled PP composites: compatibilization and adhesion. Compos. Sci. Technol. 67(13), 2838–2846 (2007)CrossRef

13.

Kim, M.H., White, J.L.: Modelling flow in tangential counter-rotating twin screw extruders. Int. Polym. Proc. 3, 201–207 (1990)

14.

White, J.L.: Twin screw extrusion. Hanser, Munich, New York, 1990

15.

Rauwendaal, C.: Mixing in polymer processing, Marcel Dekker, New York, 1991

16.

Kye, H.S., White, J.L.: Continuous polymerization of caprolactam in a modular intermeshing corotating twin screw extruder integrated with continuous melt spinning of polyamide 6 fiber: influence of screw design and process conditions. J. Appl. Polym. Sci. 52, 1249–1262 (1994)CrossRef

17.

Lachtermacher, M.G., Rudin, A.: Reactive processing of LLDPES in corotating intermeshing twin-screw extruder. II. Effect of peroxide treatment on processability. J. Appl. Polym. Sci. 58, 2433–2449 (1995)CrossRef

18.

Kim, P.J., White, J.L.: Transesterification of ethylene vinyl acetate copolymer in a modular intermeshing corotating twin screw extruder with different screw configurations. J. Appl. Polym. Sci. 54, 33–45 (1994)CrossRef

19.

Potente, H., Bastian, M., Gehring, A., Stephan, M., Pötschke, P.: Experimental investigation of the morphology development of polyblends in corotating twin-screw extruders. J. Appl. Polym. Sci. 76, 708–721 (2000)CrossRef

20.

Schmidt, L.R., Lovgran, E.M., Meissner, P.G.: Int. Polym. Proc. 4, 270 (1989)

21.

Lyu, M.Y., White, J.L.: Models of flow and experimental studies on a modular list/Buss Kokneter. Int. Polym. Proc. 4, 305–313 (1995)

22.

Kim, J.K., Lee, S.H. and Hwang, S.H. 2001. A study on thermoplastic elastomer blend using waste rubber powder (I): screw configurations, morphologies and mechanical properties. 2001. Elastomer 36(2), 86–93

23.

Zhang, J., Park, C.B., Rizvi,G.M., Huang, H., Guo, Q.: Investigation on the uniformity of high-density polyethylene/wood fiber composites in a twin-screw extruder. J. Appl. Polym. Sci. 113, 2081–2089 (2008)CrossRef

24.

Goel, S.K.; Beckman, E.J.: Generation of microcellular polymeric foams using supercritical carbon dioxide. II: Cell growth and skin formation. Polym. Eng. Sci. 34, 1148–1156 (1994)CrossRef

25.

Han, X., Zeng, C., Lee, L.J., Koelling, K.W., Tomasko, D.L.: Extrusion of polystyrene nanocomposite foams with supercritical CO2. Polym. Eng. Sci. 43, 1261–1275 (2003)CrossRef

26.

Shen, J., Zeng, C., Lee, L.J.: Synthesis of polystyrene–carbon nanofibers nanocomposite foams. Polymer 46, 5218–5224 (2005)CrossRef

27.

Munoz, E., Val, M.D., Ruiz-Gonzalez, M.L., et al.: Gold/carbon nanocomposite foam. Chem. Phys. Lett. 420, 86–89 (2006)CrossRef

28.

Lee, Y.H., Sain, M., Kuboki, T., Park, C.B.: Extrusion foaming of nano-clay-filled wood fiber composites for automotive applications. Int. J. Mater. Manuf. 1(1), 641–647 (2009)

29.

Lee, Y.H., Kuboki, T., Park, C.B., Sain, M.: Effect of nanoclay on extrusion foaming of WF/PP/Clay composites using N2. AIChE Annual Meeting, Philadelphia, PA, 16–21 Nov 2008

30.

De Loor, A., Cassagnau, P., Michel, A., Vergnes, B.: Morphological changes of a polymer blend into a twin-screw extruder. Int. Poylm. Process. IX(3), 211–218 (1994)

31.

Bikiaris, D.N., Papageorgiou, G.Z., Pavlidou, E., Vouroutzis, N., Palatzoglou, P., Karayannidis, G.P.: Preparation by melt xixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface-treated nanoparticles. J. Appl. Polym. Sci. 100, 2684–2696 (2006)CrossRef

32.

Lee, Y.H., Park, C.B., Wang, K.H., Lee, M.H.: HDPE-clay nanocomposite foams blown with supercritical CO2. J. Cell. Plast. 41, 487–502 (2005)CrossRef

33.

Guo, G., Wang, K.H., Park, C.B., Kim, Y.S., Li, G.: Effects of nanoparticles on the density reduction and cell morphology of extruded metallocene polyethylene/wood fiber nanocomposites. J. Appl. Polym. Sci. 104, 1058–1063 (2006)CrossRef

34.

Wee, D., Seong, D.G., Youn, J.R.: Processing of microcellular nanocomposite foams by using a supercritical fluid. Fibers Polym. 5(2), 160–169 (2004)CrossRef

35.

Doroudiani, S., Park, C.B., Kortschot, M.T.: Effect of the crystallinity and morphology on the microcellular foam structure of semicrystalline polymers. Polym. Eng. Sci. 36(21), 2645–2662 (1996)CrossRef

36.

Wong, S., Naguib, H.E., Park, C.B.: Effect of processing parameters on the cellular morphology and mechanical properties of thermoplastic polyolefin (TPO) microcellular foams. Adv. Polym. Technol. 26(4), 232–246 (2007)CrossRef

Titel: Effect of Compatibilizers in WPC Composites
verfasst von: Jin Kuk Kim
Kaushik Pal
Verlag: Springer Berlin Heidelberg
Buch: Recent Advances in the Processing of Wood-Plastic Composites
Print ISBN: 978-3-642-14876-7

Electronic ISBN: 978-3-642-14877-4

Copyright-Jahr: 2011
DOI: https://doi.org/10.1007/978-3-642-14877-4_5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht