Anzeige
Erschienen in:
2020 | OriginalPaper | Buchkapitel
Study on Indoor Combined Positioning Method Based on TDOA and IMU
verfasst von : Chaochao Yang, Jianhui Chen, Xiwei Guo, Deliang Liu, Yunfei Shi
Erschienen in: Communications, Signal Processing, and Systems
Verlag: Springer Singapore
Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Abstract
This paper studies an indoor positioning method combining wireless sensor network (WSN) and inertial navigation system (INS). Because the positioning error of INS increases with time, the long-term positioning accuracy is poor, so the combination uses the wireless sensor network to measure the distance between unknown node and base station by TDOA method. The dead-reckoning data of inertial measurement unit (IMU) and the distance information of TDOA method are transmitted to the processing terminal, and then the particle filter algorithm is used to smooth the data to obtain the position estimation. The cumulative positioning error of INS is corrected, and the non-line-of-sight (NLOS) error in TDOA positioning method is reduced. The experimental results show that compared with the single TDOA localization method, the accuracy of the combined positioning method is higher.