nach oben

European Journal of Wood and Wood Products

Erschienen in:

01.11.2012 | Originals Originalarbeiten

Study of thermal properties of wood plastic composite reinforced with cellulose micro fibril and nano inorganic fiber filler

verfasst von: Z. Farhadinejad, M. Ehsani, B. Khosravian, G. Ebrahimi

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 6/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Wood plastic composite was prepared by mixing wood fibrils into polypropylene with an internal mixer. Nano wollastonite was dispersed in the composite to compensate for the poor thermal characteristics of the product. Thermal properties of the obtained composite were studied by different techniques including thermo gravimetrical analysis, differential scanning calorimetry, limited oxygen index and oxidative induction time. It was found that introduction of nano wollastonite increased thermal stability as well as crystallinity in the composite due to high specific surface area of nano inorganic fiber filler. Also, flammability resistance and the required oxygen content to burn the composite were enhanced as wollastonite was added to the wood plastic composite. However, wollastonite increased oxidation of the sample because it is composed of metal oxides.

Vorheriger Artikel On the influence of binder content in particleboards bonded with resins of high and low molar ratio on the formaldehyde release measured by the perforator method

Nächster Artikel Detection of UF resin on wood particles and in particleboards: potential of selected methods for practice-oriented offline detection

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Allen NS, Edge M (1992) Fundamentals of polymer degradation and stabilization, 2nd edn. Elsevier Applied Science, London

Balkan O, Demirer H, Ezdesir A, Yildirim H, Yilmazer Ü (2007) Effects of SEBS and SEBS-g-MA modifications on the fracture behavior of i-PP/Glass bead and BEAD and i-PP/Wollastonite composites. In: Proceedings of 8th international fracture conference, Istanbul/Turkey, pp 351–360

Biagiotti J, Fiori S, Torre L, López-Manchado MA, Kenny JM (2004) Mechanical properties of polypropylene matrix composites reinforced with natural fibers: a statistical approach. Polym Compos 25:26–36CrossRef

Burnside SD, Giannelis EP (1995) Synthesis and properties of new poly (dimethylsiloxane) nano composite. Polym Mater 7:1597–1600

Caraschi JC, Leao AL (2002) Wood flour as reinforcement of polypropylene. Mater Res 5:405–409CrossRef

Chen M, Wan C, Shou W, Zhan Y, Zhang Y, Zhang J (2008) Effects of interfacial adhesion on properties of polypropylene/wollastonite composites. J Appl Polym Sci 107:1718–1723CrossRef

Clemons CM (2002) Wood–plastic composites in the United States: the interfacing of two industries. Forest Prod J 52:10–18

Dasari A, Misra RDK (2004) The role of micrometric wollastonite particles on stress whitening behavior of polypropylene compositesm. Acta Materialia 52:1683–1697CrossRef

Enayati AA, Hosseinaei O, Wang S, Mirshokraie SA, Tajvidi M (2009) Thermal Properties of wood–plastic composites prepared from hemicellulose-extracted wood flour. Iranian J Polym Sci Tech 3:171–181

Gao X, Meng X, Wang H, Wen B, Ding Y, Zhang S, Yang M (2008) Antioxidant behaviour of a nanosilica-immobilized antioxidant in polypropylene. J Polym Degrade Stab 93:1467–1471CrossRef

Gilman JW (1999) Flammability and thermal stability studies of polymer layered-silicate (Clay) nanocomposites. Appl Clay Sci 15:31–49CrossRef

Ismail H, Edyham MR, Wirjosentono B (2002) Bamboo fibre filled natural rubber composites: the effects of filler loading and bonding agent. Polym Test 21:139–144CrossRef

Jahani Y, Ehsani M (2009a) The rheological modification of talc-filled polypropylene by epoxy-polyester hybrid resin and its effect on morphology, crystallinity, and mechanical properties. Polym Eng Sci 49:619–629CrossRef

Jahani Y, Ehsani M (2009b) The effects of epoxy resin nano particles on shrinkage behavior and thermal stability of talc-filled polypropylene. Polym Bull 63:743–754CrossRef

Jipa S, Zaharescu T, Supaphol P (2010) Thermal stability of isotactic polypropylene modified with calcium carbonate nanoparticles. Polym Bull 64:783–790CrossRef

Joseph PV, Rabello MS, Mattoso LHC, Joseph K, Thomas S (2002) Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites. Comp Sci Tech 62:1357–1372CrossRef

Karger-Kocsis J (1995) Polypropylene: structure, blends and composites. Chapman and Hall, New YorkCrossRef

Kashiwagi T (1994) Polymer combustion and flammability role of the condensed phase. In: Twenty-fifth international symposium on combustion, The Combustion Institute, pp 1423–1437

Kim HS, Yang HS, Kim HJ, Park HJ (2004) Thermal properties of agro-flour-filled biodegradable polymer bio-composites. J Therm Anal Calorim 76:395–404CrossRef

Kim SW, Lee SH, Kang JS, Kang KH (2006) Thermal conductivity of thermoplastics reinforced with natural fibers. Int J Thermophys 27:1873–1881CrossRef

Klyosov AA (2007) Wood plastic composites. John Wiley, New JerseyCrossRef

Kokta BV, Raj RG, Daneault C (1991) Use of wood flour as a filler in polypropylene: studies on mechanical properties. Polym Plast Technol Eng 28:609–620

Lee SY, Kang IA, Doh GH, Kim WJ, Kim JS, Yoon HG, Wu Q (2008) Thermal, mechanical and morphological properties of polypropylene/clay/wood flour nanocomposites. Express Polym Lett 2:78–87CrossRef

Lei Y, Wu Q, Clemons CM, Yao F, Xu Y (2007) Influence of nanoclay on property of HDPE/Wood composites. J Appl Polym Sci 106:3958–3966CrossRef

Luyt AS, Dramicanin MD, Antic Z, Djokovic V (2009) Morphology, mechanical and thermal properties of composites of polypropylene and nanostructured wollastonite filler. Polym Test 28:348–356CrossRef

Meng MR, Dou Q (2008) Effect of pimelic acid on the crystallization, morphology and mechanical properties of polypropylene/wollastonite composites. Mater Sci Eng, A 492:177–184CrossRef

Mueller DH, Krobjilowski A (2004) Improving the impact strength of natural fiber reinforced composites by specifically designed material and process parameters. Int Nonwovens J 13(4):31–38

Ning NY, Yin QJ, Luo F, Zhang Q, Du R, Fu Q (2007) Crystallization behavior and mechanical properties of polypropylene/hallo site composites. Polymer 48:7374–7384CrossRef

Purohit V, Orzel RA (1988) Polypropylene: a literature review of the thermal decomposition products and toxicity. Int J Toxicol 7:221–242CrossRef

Qin H, Zhang S, Zhao C, Feng M, Yang M, Shu Z, Yang S (2004) Thermal stability and flammability of polypropylene/montmorillonite composites. Polym Degrad Stab 85:807–813CrossRef

Rana AK, Mandal A, Mitra BC, Jacobson R, Rowell R, Banerjee AN (1998) Effect of compatibilizer. J Appl Polym Sci 69:329–338CrossRef

Rl Virta (2007) Wollastonite. US Geological survey minerals yearbook, New York

Saujanya C, Tangirala R, Radhakrishnan S (2002) Ctystallization behavior in poly (propylene) containing wollastonite microfibrils. Macromol Mater Eng 287:272–276CrossRef

Švab I, Musil V, Leskovac M (2005) The adhesion phenomena in polypropylene/wollastonite composites. Acta Chim Slov 52:264–271

Švab I, Musil V, Pustak A, Šmit I (2009) Wollastonite-reinforced polypropylene composites modified with novel metallocene EPR copolymers. II. Mechanical properties and adhesion. Polym Compos 30:1091–1097CrossRef

Tajan M, Chaiwutthinan P, Leejarpai T (2008) Thermal and mechanical properties of wood–plastic composites from iron wood flour and recycled polypropylene foam. J Metals Mater Miner 18:53–56

Thakur VK, Singha AS (2010) Natural fibers-based polymers: part I: mechanical analysis of Pine needles reinforced biocomposites. Bull Mater Sci 33:257–264CrossRef

Thiruchitrambalam M, Alavudeen A, Athijayamani A, Venkateshwaran N, Elaya-Perumal A (2009) Improving mechanical properties of banana/kenaf polyester hybrid composite using sodium laulryl sulfate treatment. Mater Phys Mech 8:165–173

Winata H, Turng LS, Caulfield DF, Kuster T, Spindler R, Jacobson R (2003) Applications of polyamide/cellulose fiber/wollastonite composites for microcellular injection molding. Antec, Nashville

Wirawan R, Zainudin ES, Sapuan SM (2009) Mechanical properties of natural fibre reinforced PVC composites: a review. Sains Malaysiana 38:531–535

Wollerdorfer M, Bader H (1998) Influence of natural fibres on the mechanical properties of biodegradable polymers. Ind Crops Prod 8:105–112CrossRef

Yang HS, Kim HJ, Son J, Park HJ, Lee BJ, Hwang TS (2004) Rice-husk flour filled polypropylene composites; mechanical and morphological study. Compos Struct 63:305–312CrossRef

Titel: Study of thermal properties of wood plastic composite reinforced with cellulose micro fibril and nano inorganic fiber filler
verfasst von: Z. Farhadinejad
M. Ehsani
B. Khosravian
G. Ebrahimi
Publikationsdatum: 01.11.2012
Verlag: Springer-Verlag
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 6/2012
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-012-0630-y

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2012

The significance of lap-shear testing of wood adhesive bonds by means of Volkersen’s shear lag model

XRF examination of matrix uniqueness in chosen deciduous wood species

Macroscopic and microscopic monitoring of swelling of beech wood after impregnation with furfuryl alcohol

Modelling of the mechanical properties of Castanea sativa Mill. structural timber by a combination of non-destructive variables and visual grading parameters

Analysing orthotropy in the core layer of wood based panels by means of fracture mechanics

FTIR examination of preservative retention in beech wood (Fagus sylvatica L.)