Anzeige
Erschienen in:
01.01.2016 | Brief Original
Use of wood powder and adhesive as a mixture for 3D printing
Erschienen in: European Journal of Wood and Wood Products | Ausgabe 1/2016
EinloggenAktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Abstract
In recent years there has been much development in the field of additive manufacturing technologies, but only a few attempts have been made to use natural materials like wood for 3D printing. In this research different ratios of wood powder were used as a component in adhesive mixtures for 3D printing. Polyvinyl acetate and urea–formaldehyde adhesives were used as binders, and the optimum mixture was determined by measuring the corresponding extrusion forces. Simple blocks were 3D printed and the bending properties of these blocks were investigated. The bending strength depended on the amount of wood powder in the mixture and on the type of adhesive.