Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
The International Journal of Advanced Manufacturing Technology
Erschienen in: The International Journal of Advanced Manufacturing Technology 5-6/2019

26.10.2019 | ORIGINAL ARTICLE

Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a review

verfasst von: Muhammad Aamir, Majid Tolouei-Rad, Khaled Giasin, Ataollah Nosrati

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 5-6/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Drilling is considered as one of the most challenging problems in aerospace structures where stringent tolerances are required for fasteners such as rivets and bolts to join the mating parts for final assembly. Fiber-reinforced polymers are widely used in aeronautical applications due to their superior properties. One of the major challenges in machining such polymers is the poor drilled-hole quality which reduces the strength of the composite and leads to part rejection at the assembly stage. In addition, rapid tool wear due to the abrasive nature of composites requires frequent tool change which results in high tooling and machining costs. This review intended to give in-depth details on the progress of drilling of fiber-reinforced polymers with special attention given to carbon fiber–reinforced polymers. The objective is to give a comprehensive understanding of the role of drilling parameters and composite properties on the drilling-induced damage in machined holes. Additionally, the review examines the drilling process parameters and its optimization techniques, and the effects of dust particles on human health during the machining process. This review will provide scientific and industrial communities with advantages and disadvantages through better drilled-hole quality inspection.
Vorheriger Artikel Optimization and prediction of surface quality and cutting forces in the milling of aluminum alloys using ANFIS and interval type 2 neuro fuzzy network coupled with population-based meta-heuristic learning methods
Nächster Artikel Mechanism study of sinking electrical discharge machining using water-in-oil nanoemulsion

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Davim JP (2009) Machining composites materials. Wiley-ISTE, London
2.
Callister WD, Rethwisch DG (2007) Materials science and engineering: an introduction, vol 7. John wiley & sons New York, USA
3.
Callister DW Jr (2007) Materials science and engineering: an introduction. John Wiley & Sons Inc–New York, New York
4.
Mallick PK (2007) Fiber-reinforced composites: materials, manufacturing, and design. CRC press, Boca Raton
5.
Harris M, Qureshi MAM, Saleem MQ, Khan SA, Bhutta MMA (2017) Carbon fiber-reinforced polymer composite drilling via aluminum chromium nitride-coated tools: Hole quality and tool wear assessment. J Reinf Plast Compos 36(19):1403–1420
6.
Vankanti VK, Ganta V (2014) Optimization of process parameters in drilling of GFRP composite using Taguchi method. J Mater Res Technol 3(1):35–41
7.
Giasin K, Ayvar-Soberanis S (2017) Microstructural investigation of drilling induced damage in fibre metal laminates constituents. Compos A: Appl Sci Manuf 97:166–178
8.
Soutis C (2005) Fibre reinforced composites in aircraft construction. Prog Aerosp Sci 41(2):143–151
9.
Jerome P (2001) Composite materials in the airbus A380-from history to future. In: Beijing: Proceedings 13th International Conference on Composite Materials (ICCM-13).
10.
Mouritz AP (2012) Introduction to aerospace materials. Woodhead Publishing, Sawston
11.
Che D, Saxena I, Han P, Guo P, Ehmann KF (2014) Machining of carbon fiber reinforced plastics/polymers: a literature review. J Manuf Sci Eng 136(3):034001
12.
Giasin K, Ayvar-Soberanis S (2017) An investigation of burrs, chip formation, hole size, circularity and delamination during drilling operation of GLARE using ANOVA. Compos Struct 159:745–760
13.
Giasin K, Ayvar-Soberanis S, French T, Phadnis V (2017) 3d finite element modelling of cutting forces in drilling fibre metal laminates and experimental hole quality analysis. Appl Compos Mater 24(1):113–137
14.
Giasin K, Hodzic A, Phadnis V, Ayvar-Soberanis S (2016) Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study. Int J Adv Manuf Technol 87(5-8):2041–2061
15.
Liu D, Tang Y, Cong W (2012) A review of mechanical drilling for composite laminates. Compos Struct 94(4):1265–1279
16.
Giasin K, Ayvar-Soberanis S, Hodzic A (2015) An experimental study on drilling of unidirectional GLARE fibre metal laminates. Compos Struct 133:794–808
17.
Feito N, Díaz-Álvarez J, Díaz-Álvarez A, Cantero JL, Miguélez MH (2014) Experimental analysis of the influence of drill point angle and wear on the drilling of woven CFRPs. Materials 7(6):4258–4271
18.
Gaitonde V, Karnik S, Rubio JC, Correia AE, Abrao A, Davim JP (2008) Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites. J Mater Process Technol 203(1-3):431–438
19.
Arul S, Vijayaraghavan L, Malhotra S, Krishnamurthy R (2006) The effect of vibratory drilling on hole quality in polymeric composites. Int J Mach Tools Manuf 46(3-4):252–259
20.
Khashaba U (2013) Drilling of polymer matrix composites: a review. J Compos Mater 47(15):1817–1832
21.
M'Saoubi R, Axinte D, Soo SL, Nobel C, Attia H, Kappmeyer G, Engin S, Sim W-M (2015) High performance cutting of advanced aerospace alloys and composite materials. CIRP Ann 64(2):557–580
22.
Xu J, Mkaddem A, El Mansori M (2016) Recent advances in drilling hybrid FRP/Ti composite: a state-of-the-art review. Compos Struct 135:316–338
23.
Panchagnula KK, Palaniyandi K (2018) Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review. J Mater Res Technol 7(2):180–189
24.
25.
Vigneshwaran S, Uthayakumar M, Arumugaprabu V (2018) Review on Machinability of Fiber Reinforced Polymers: A Drilling Approach. Silicon 10(5):2295–2305
26.
Karataş MA, Gökkaya H (2018) A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials. Defence Technol 14(4):318–326
27.
Strong AB (2008) Fundamentals of composites manufacturing: materials, methods and applications. Society of Manufacturing Engineers, USA
28.
Wang G-D, Kirwa MS (2018) Comparisons of the use of twist, pilot-hole and step-drill on influence of carbon fiber-reinforced polymer drilling hole quality. J Compos Mater 52(11):1465–1480
29.
Niu C (1988) Airframe structural design: practical design information and data on aircraft structures. Conmilit Press, Hong Kong
30.
Wang X, Kwon PY, Sturtevant C, Lantrip J (2013) Tool wear of coated drills in drilling CFRP. J Manuf Process 15(1):127–135
31.
Turki Y, Habak M, Velasco R, Aboura Z, Khellil K, Vantomme P (2014) Experimental investigation of drilling damage and stitching effects on the mechanical behavior of carbon/epoxy composites. Int J Mach Tools Manuf 87:61–72
32.
Ramirez C, Poulachon G, Rossi F, M'Saoubi R (2014) Tool wear monitoring and hole surface quality during CFRP drilling. Procedia CIRP 13:163–168
33.
Wei YY, Xu JY, Cai XJ, An QL, Chen M (2014) Effect of drills with different drill bits on delamination in drilling composite materials. In: Key Engineering Materials. Trans Tech Publ, pp 173-178
34.
Abhishek K, Datta S, Mahapatra SS (2015) Optimization of thrust, torque, entry, and exist delamination factor during drilling of CFRP composites. Int J Adv Manuf Technol 76(1-4):401–416
35.
Gaugel S, Sripathy P, Haeger A, Meinhard D, Bernthaler T, Lissek F, Kaufeld M, Knoblauch V, Schneider G (2016) A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers (CFRP). Compos Struct 155:173–183
36.
Fernández-Pérez J, Cantero J, Díaz-Álvarez J, Miguelez M (2017) Influence of cutting parameters on tool wear and hole quality in composite aerospace components drilling. Compos Struct 178:157–161
37.
Qiu X, Li P, Niu Q, Chen A, Ouyang P, Li C, Ko TJ (2018) Influence of machining parameters and tool structure on cutting force and hole wall damage in drilling CFRP with stepped drills. Int J Adv Manuf Technol 97(1–4):857–865 1-9
38.
Xu J, Li C, Mi S, An Q, Chen M (2018) Study of drilling-induced defects for CFRP composites using new criteria. Compos Struct 201:1076–1087
39.
Hocheng H, Puw H, Huang Y (1993) Preliminary study on milling of unidirectional carbon fibre-reinforced plastics. Compos Manuf 4(2):103–108
40.
Sheikh-Ahmad JY (2009) Machining of polymer composites. Springer, Boston
41.
Wang X, Zhang L (2003) An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics. Int J Mach Tools Manuf 43(10):1015–1022
42.
Ghafarizadeh S, Lebrun G, Chatelain J-F (2016) Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic. J Compos Mater 50(8):1059–1071
43.
Gao C, Xiao J, Xu J, Ke Y (2016) Factor analysis of machining parameters of fiber-reinforced polymer composites based on finite element simulation with experimental investigation. Int J Adv Manuf Technol 83(5-8):1113–1125
44.
45.
Gao H, Bao Y, Feng Z (2011) A study of drilling uni-directional carbon/epoxy composites. Int J Abras Technol 4(1):1–13
46.
Alberdi A, Artaza T, Suárez A, Rivero A, Girot F (2016) An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations. Int J Adv Manuf Technol 86(1-4):691–704
47.
Mk NK, Ch CH, Jaharah A, AKM NA (2012) Tool wear and surface roughness on milling carbon fiber-reinforced plastic using chilled air. J Asian Sci Res 2(11):593
48.
Sreejith P, Krishnamurthy R, Malhotra S, Narayanasamy K (2000) Evaluation of PCD tool performance during machining of carbon/phenolic ablative composites. J Mater Process Technol 104(1-2):53–58
49.
Krishnaraj V, Zitoune R, Davim JP (2013) Drilling of polymer-matrix composites. Springer
50.
Khan ZM (1991) A study of the drilling of advanced carbon fibre composites. University of Salford, Salford
51.
Giasin K (2017) Machining fibre metal laminates and Al2024-T3 aluminium alloy, Doctoral dissertation, University of Sheffield, UK
52.
Davim JP (2009) Drilling of Composite Materials. NOVA Publishers, New York
53.
Latha B, Senthilkumar V, Palanikumar K (2011) Modeling and optimization of process parameters for delamination in drilling glass fiber reinforced plastic (GFRP) composites. Mach Sci Technol 15(2):172–191
54.
Caggiano A, Angelone R, Teti R (2017) Image Analysis for CFRP Drilled Hole Quality Assessment. Procedia CIRP 62:440–445
55.
Melentiev R, Priarone PC, Robiglio M, Settineri L (2016) Effects of tool geometry and process parameters on delamination in CFRP drilling: An overview. Procedia CIRP 45:31–34
56.
Kavad B, Pandey A, Tadavi M, Jakharia H (2014) A review paper on effects of drilling on glass fiber reinforced plastic. Procedia Technology 14:457–464
57.
Azmi A (2012) Machinability study of fibre-reinforced polymer matrix composites, Doctoral dissertation, ResearchSpace@ Auckland, New Zealand
58.
Srinivasan T, Palanikumar K, Rajagopal K, Latha B (2017) Optimization of delamination factor in drilling GFR–polypropylene composites. Mater Manuf Process 32(2):226–233
59.
Chen W-C (1997) Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. Int J Mach Tools Manuf 37(8):1097–1108
60.
de Silva DNR (2013) Image processing methodology for assessment of drilling induced damage in CFRP, Thesis 2013, Faculdade de Ciencias e Tecnologia, Universidade Nova de Lisboa
61.
El-Sonbaty I, Khashaba U, Machaly T (2004) Factors affecting the machinability of GFR/epoxy composites. Compos Struct 63(3-4):329–338
62.
Faraz A, Biermann D, Weinert K (2009) Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates. Int J Mach Tools Manuf 49(15):1185–1196
63.
Mehta M, Reinhart T, Soni A (1992) Effect of fastener hole drilling anomalies on structural integrity of PMR-15/Gr composite laminates. Machining of composite materials(A 95-15178 02-37), Materials Park, OH. ASM Int 1992:113–126
64.
Mohan N, Kulkarni S, Ramachandra A (2007) Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials. J Mater Process Technol 186(1-3):265–271
65.
Davim JP, Rubio JC, Abrao A (2007) A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates. Compos Sci Technol 67(9):1939–1945
66.
Tsao C, Kuo K, Hsu I (2012) Evaluation of a novel approach to a delamination factor after drilling composite laminates using a core–saw drill. Int J Adv Manuf Technol 59(5-8):617–622
67.
68.
Scott I, Scala C (1982) A review of non-destructive testing of composite materials. NDT Int 15(2):75–86
69.
70.
Seif M, Khashaba U, Rojas-Oviedo R (2007) Measuring delamination in carbon/epoxy composites using a shadow moiré laser based imaging technique. Compos Struct 79(1):113–118
71.
Meola C, Carlomagno GM, Squillace A, Prisco U, Morace RE (2005) Analysis of composites with infrared thermography. In. Wiley Online Library, pp 273-286
72.
Durão LM, Magalhães AG, Tavares JMRS, Marques AT (2008) Analyzing objects in images for estimating the delamination influence on load carrying capacity of composite laminates. ELCVIA: Electronic letters on computer vision and image analysis 7(2):11–21
73.
Marques AT, Durão LM, Magalhães AG, Silva JF, Tavares JMRS (2009) Delamination analysis of carbon fibre reinforced laminates: evaluation of a special step drill. Compos Sci Technol 69(14):2376–2382
74.
Durao L, MA, Marques A, Tavares JMRS (2007) Effect of drilling parameters on composite plates damage.In: High Speed Industrial Manufacturing Processes (HSIMP), Senlis (France), p 08
75.
Favro L, Han X, Ouyang Z, Sun G, Thomas R (2001) Sonic IR imaging of cracks and delaminations. Anal Sci 17:451
76.
Kurt M, Kaynak Y, Bagci E (2008) Evaluation of drilled hole quality in Al 2024 alloy. Int J Adv Manuf Technol 37(11-12):1051–1060
77.
Vorburger T, Raja J (1990) Surface finish metrology tutorial. National Inst. of Standards and Technology, U.S. Department of Commerce, Gaithersburg, MD 20899
78.
79.
Sureshkumar M, Lakshmanan D, Murugarajan A (2014) Experimental investigation and mathematical modelling of drilling on GFRP composites. Mater Res Innov 18(S1):S1-94–S91-97
80.
Zitoune R, Krishnaraj V, Collombet F (2010) Study of drilling of composite material and aluminium stack. Compos Struct 92(5):1246–1255
81.
Van Gestel N (2011) Determining measurement uncertainties of feature measurements on CMMs, these of Doctorate, Katholieke Universiteit Leuven – Faculteit Ingenieurs wetens chappen Kasteel park Arenberg 1-bus 2200, B-3001 Heverlee
82.
Krishnaraj V, Zitoune R, Davim JP (2013) Drilling of Polymer-Matrix Composites. Springer, Berlin Heidelberg
83.
Davim JP, Reis P (2003) Drilling carbon fiber reinforced plastics manufactured by autoclave—experimental and statistical study. Mater Des 24(5):315–324
84.
Abrão AM, Faria PE, Rubio JC, Reis P, Davim JP (2007) Drilling of fiber reinforced plastics: A review. J Mater Process Technol 186(1-3):1–7
85.
Davim JP, Reis P (2003) Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments. Compos Struct 59(4):481–487
86.
Abrao A, Rubio JC, Faria P, Davim J (2008) The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite. Mater Des 29(2):508–513
87.
Shyha I, Aspinwall D, Soo SL, Bradley S (2009) Drill geometry and operating effects when cutting small diameter holes in CFRP. Int J Mach Tools Manuf 49(12-13):1008–1014
88.
Palanikumar K (2011) Experimental investigation and optimisation in drilling of GFRP composites. Measurement 44(10):2138–2148
89.
Rajakumar IPT, Hariharan P, Srikanth I (2013) A study on monitoring the drilling of polymeric nanocomposite laminates using acoustic emission. J Compos Mater 47(14):1773–1784
90.
Tsao C (2008) Investigation into the effects of drilling parameters on delamination by various step-core drills. J Mater Process Technol 206(1-3):405–411
91.
Quan Y, Zhong W (2009) Investigation on drilling-grinding of CFRP. Front Mech Eng China 4(1):60–63
92.
Durão LMP, Gonçalves DJ, Tavares JMR, de Albuquerque VHC, Vieira AA, Marques AT (2010) Drilling tool geometry evaluation for reinforced composite laminates. Compos Struct 92(7):1545–1550
93.
Grilo T, Paulo R, Silva C, Davim J (2013) Experimental delamination analyses of CFRPs using different drill geometries. Compos Part B 45(1):1344–1350
94.
Rubio JC, Abrao A, Faria P, Correia AE, Davim JP (2008) Effects of high speed in the drilling of glass fibre reinforced plastic: evaluation of the delamination factor. Int J Mach Tools Manuf 48(6):715–720
95.
Campos Rubio JC, Abrão AM, Eustaquio Faria P, Correia AE, Davim JP (2008) Delamination in high speed drilling of carbon fiber reinforced plastic (CFRP). J Compos Mater 42(15):1523–1532
96.
97.
Davim JP, Reis P, António CC (2004) Drilling fiber reinforced plastics (FRPs) manufactured by hand lay-up: influence of matrix (Viapal VUP 9731 and ATLAC 382-05). J Mater Process Technol 155:1828–1833
98.
Hocheng H, Tsao C (2006) Effects of special drill bits on drilling-induced delamination of composite materials. Int J Mach Tools Manuf 46(12-13):1403–1416
99.
Feito N, Milani A, Muñoz-Sánchez A (2016) Drilling optimization of woven CFRP laminates under different tool wear conditions: a multi-objective design of experiments approach. Struct Multidiscip Optim 53(2):239–251
100.
Youssef HA, El-Hofy HA (2008) Machining technology: machine tools and operations. CRC Press, Boca Raton
101.
102.
Feito N, Díaz-Álvarez J, López-Puente J, Miguelez M (2018) Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs. Compos Struct 184:1147–1155
103.
Xu J, An Q, Chen M (2014) A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP. Compos Struct 117:71–82
104.
Tsao C, Chiu Y (2011) Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills. Int J Mach Tools Manuf 51(9):740–744
105.
Lazar M-B, Xirouchakis P (2011) Experimental analysis of drilling fiber reinforced composites. Int J Mach Tools Manuf 51(12):937–946
106.
Babu J, Basavarajappa S, Blass D, Blümel S, Chatelain J-F, Cong W, Díaz-Álvarez J, Dilger K, Feito N, Fischer F (2015) Machinability of fibre-reinforced plastics, vol 4. Walter de Gruyter GmbH & Co KG,
107.
108.
Groover MP (2007) Fundamentals of modern manufacturing: materials processes, and systems. John Wiley & Sons, USA
109.
El Bouami S, Habak M, Franz G, Velasco R, Vantomme P Effect of tool geometry and cutting parameters on delamination and thrust forces in drilling CFRP/Al-Li. In: AIP Conference Proceedings, 2016. vol 1. AIP Publishing, p 080012
110.
Rimpault X, Chatelain J-F, Klemberg-Sapieha JE, Balazinski M (2017) Burr height monitoring while drilling CFRP/titanium/aluminium stacks. Mech Indu 18(1):114
111.
Zitoune R, Krishnaraj V, Collombet F, Le Roux S (2016) Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks. Compos Struct 146:148–158
112.
Xu J, El Mansori M (2016) Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks. Compos Struct 157:461–482
113.
Xu W, Zhang L (2018) Tool wear and its effect on the surface integrity in the machining of fibre-reinforced polymer composites. Compos Struct 188:257–265
114.
115.
Trent EEM (2000) Metal cutting [electronic resource]. Butterworth-Heinemann, UK
116.
Ozkan D, Panjan P, Gok MS, Karaoglanli AC (2019) Investigation of machining parameters that affects surface roughness and cutting forces in milling of CFRPs with TiAlN and TiN coated carbide cutting tools. Mater Res Express 6(9):095616
117.
Hanif MI, Aamir M, Ahmed N, Maqsood S, Muhammad R, Akhtar R, Hussain I (2019) Optimization of facing process by indigenously developed force dynamometer. Int J Adv Manuf Technol 100(5-8):1893–1905
118.
Arun Ramnath R, Thyla P, Mahendra Kumar N, Aravind S (2018) Optimization of machining parameters of composites using multi-attribute decision-making techniques: A review. J Reinf Plast Compos 37(2):77–89
119.
Turki Y, Habak M, Velasco R, Laurent JN, Vantomme P (2013) An experimental study of drilling parameters effect on composite carbon/epoxy damage. In: Key Engineering Materials. Trans Tech Publ, pp 2038-2046
120.
Enemuoh EU, El-Gizawy AS, Okafor AC (2001) An approach for development of damage-free drilling of carbon fiber reinforced thermosets. Int J Mach Tools Manuf 41(12):1795–1814
121.
Sardinas RQ, Reis P, Davim JP (2006) Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms. Compos Sci Technol 66(15):3083–3088
122.
Tsao C, Hocheng H (2008) Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network. J Mater Process Technol 203(1-3):342–348
123.
Shyha I, Soo SL, Aspinwall D, Bradley S (2010) Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites. J Mater Process Technol 210(8):1023–1034
124.
Krishnamoorthy A, Boopathy SR, Palanikumar K, Davim JP (2012) Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics. Measurement 45(5):1286–1296
125.
Abhishek K, Datta S, Mahapatra SS (2016) Multi-objective optimization in drilling of CFRP (polyester) composites: Application of a fuzzy embedded harmony search (HS) algorithm. Measurement 77:222–239
126.
Rao S, Sethi A, Das AK, Mandal N, Kiran P, Ghosh R, Dixit A, Mandal A (2017) Fiber laser cutting of CFRP composites and process optimization through response surface methodology. Mater Manuf Process 32(14):1612–1621
127.
Vijayan D, Abhishek P, Kumar YM, Balaji P, Kumar Reddy PS (2018) Optimization of Drilling Parameters of Carbon Fiber Composites Using RSM based Desirability Function. In: IOP Conference Series: Materials Science and Engineering. vol 1. IOP Publishing, p 012076
128.
129.
Thakur P, Teli S, Lad S (2019) Multiobjective Optimization in Drilling of Composites. In: Proceedings of International Conference on Intelligent Manufacturing and Automation. Springer, pp 279-286
130.
131.
Shunmugesh K, Panneerselvam K (2017) Optimization of Machining Process Parameters in Drilling of CFRP Using Multi-Objective Taguchi Technique, TOPSIS and RSA Techniques. Polym Polym Compos 25(3):185–192
132.
Arul S, Samuel Raj D, Vijayaraghavan L, Malhotra S, Krishnamurthy R (2006) Modeling and optimization of process parameters for defect toleranced drilling of GFRP composites. Mater Manuf Process 21(4):357–365
133.
134.
Malik J, Mishra R, Singh I (2011) PSO-ANN approach for estimating drilling induced damage in CFRP laminates. Adv Prod Eng Manag 6(2):95–104
135.
136.
137.
Pignatiello JJ Jr, Ramberg JS (1991) Top ten triumphs and tragedies of Genichi Taguchi. Qual Eng 4(2):211–225
138.
Iyer AK (2015) Characterization of Composite Dust generated during Milling of Uni-Directional and Random fiber composites. University of Washington, Washington
139.
Kwan JK-C (1990) Health hazard evaluation of the postcuring phase of graphite composite operations at the Lawrence Livermore National Laboratory, Livermore, California. Lawrence Livermore National Lab, CA (USA)
140.
Haddad M, Zitoune R, Eyma F, Castanie B (2014) Study of the surface defects and dust generated during trimming of CFRP: influence of tool geometry, machining parameters and cutting speed range. Compos A: Appl Sci Manuf 66:142–154
141.
Haddad M, Zitoune R, Eyma F, Castanié B, Bougherara H (2012) Surface quality and dust analysis in high speed trimming of CFRP. In: Applied Mechanics and Materials. Trans Tech Publ, pp 57-62
142.
Ngoc Nguyen-Dinh RZ, Bouvet C, Leroux S (2018) Experimental study of dust emission during trimming of CFRP structures with PCD tool. Paper presented at the ECCM18 - 18th European Conference on Composite Materials, Athens
143.
Ramulu M, Kramlich J (2004) Machining of fiber reinforced composites: review of environmental and health effects. Int J Environ Conscious Design Manuf 11 (4)
144.
Koenig FKW, Wuertz C, Dietz C (1999) Environmental effects and safety in machining fibrous composites. Mach Ceram Comp 53:411
145.
Piquet R, Ferret B, Lachaud F, Swider P (2000) Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills. Compos A: Appl Sci Manuf 31(10):1107–1115
146.
Murphy C, Byrne G, Gilchrist M (2002) The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials. Proc Inst Mech Eng B J Eng Manuf 216(2):143–152
147.
Feito N, Diaz-Alvarez A, Cantero JL, Rodríguez-Millán M, Miguelez H (2016) Experimental analysis of special tool geometries when drilling woven and multidirectional CFRPs. J Reinf Plast Compos 35(1):33–55
Metadaten
Titel
Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a review
verfasst von
Muhammad Aamir
Majid Tolouei-Rad
Khaled Giasin
Ataollah Nosrati
Publikationsdatum
26.10.2019
Verlag
Springer London
Erschienen in
The International Journal of Advanced Manufacturing Technology / Ausgabe 5-6/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-019-04348-z

Weitere Artikel der Ausgabe 5-6/2019

The International Journal of Advanced Manufacturing Technology 5-6/2019 Zur Ausgabe

ORIGINAL ARTICLE

Optimization and prediction of surface quality and cutting forces in the milling of aluminum alloys using ANFIS and interval type 2 neuro fuzzy network coupled with population-based meta-heuristic learning methods

ORIGINAL ARTICLE

Study on turning force of γ-TiAl alloy

ORIGINAL ARTICLE

Stability prediction in milling based on linear multistep method

ORIGINAL ARTICLE

Fabrication of deep and small holes by synchronized laser and shaped tube electrochemical machining (Laser-STEM) hybrid process

ORIGINAL ARTICLE

Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing

Correction

Correction to: CFD research on particle movement and nozzle wear in the abrasive water jet cutting head

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise