Solid transport measurements through image processing

The paper describes a novel technique which enables evaluation of sediment fluxes on the upper layer of a granular bed by means of separate measurements of concentration and velocity of the moving particles. Specific elaboration techniques based on digital image processing were applied to films of the solid fluxes, allowing for automatic measurement. Sediment concentration was measured via a technique based on image subtraction and following proper filtering procedures, while grain velocity was measured by Particle Image Velocimetry. The method was applied in laboratory experiments of one dimensional bed load; the solid discharges measured by the proposed image processing technique were compared to those obtained by manual count of the grains passing over a fixed plate used as a sight. After calibration of the automatic technique, dimensionless solid discharges ranging from 1.0 × 10⁻³ to 1.2 × 10⁻¹ were measured with a maximum error as large as 25%. The technique proposed also enables measurement of the time variation of the quantities and the two dimensional direction of sediment motion, for a complete characterization of grain kinematics in solid transport processes.