nach oben

Cellulose

Erschienen in:

27.05.2021 | Original Research

The fluorine-free coating has excellent hydrophobic and oleophobic properties for porous cellulose-based materials

verfasst von: Peng Du, Qijun Ding, Chuanshan Zhao, Yifei Jiang, Wenjia Han, Xia Li

Erschienen in: Cellulose | Ausgabe 10/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Nanofibrillated cellulose is obtained from cellulose resources (e.g., Natural cellulose, bacterial cellulose) and is deemed to be environmentally friendly, green, and inexhaustible. Accordingly, we reported an innovative method for fluorine-free water- and oil/grease-repellent surface based on porous cellulose-based materials. In order to improve oil/grease resistance, sulfonated nanofibrillated cellulose (SNFC) was coated on the surface to fill the porous, the obtained paper was soaked in chitosan aqueous solution as the second layer. The-SNFC-chitosan-coated paper was applied with modified polyvinyl alcohol (MPVA) as the third layer to increase water resistance and water vapour transmittance. The experimental results showed 5.2 g/m² SNFC, 2.5 g/m² chitosan and 7% MPVA demonstrated excellent kit rating value of 12/12 (maximum grease resistance) (oil resistance contact angle is 103.93°), good water resistance (water contact angle is 108.6°) and high water vapour transmission rate (4.8 × 10^–14 g cm/cm² s Pa) under the condition of 90% relative humidity. This non-fluorinated and practical method is an excellent alternative to existing fluorinated materials, which will further promote the development of cellulose-based packaging.

Graphic abstract

Vorheriger Artikel Synthesis of optically inactive cellulose via cationic ring-opening polymerization

Nächster Artikel Cellulose nanocrystal extraction from rice straw using a chlorine-free bleaching process

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Afanas’Eva NV, Petrova VA, Vlasova EN, Gladchenko SV, Bochek AM (2014) Molecular mobility of chitosan and its interaction with montmorillonite in composite films: dielectric spectroscopy and FTIR studies. Polym Sci Ser 55:738–748. https://doi.org/10.1134/S0965545X13120018CrossRef

Bierhalz ACK, Silva MAD, Kieckbusch TG (2012) Natamycin release from alginate/pectin films for food packaging applications. J Food Eng 110:18–25. https://doi.org/10.1016/j.jfoodeng.2011.12.016CrossRef

Bormashenko E, Gendelman O, Whyman G (2012) Superhydrophobicity of lotus leaves versus birds wings: different physical mechanisms leading to similar phenomena. Langmuir ACS J Surf Colloids 28:14992–14997. https://doi.org/10.1021/la303340xCrossRef

Cazon P, Velazquez G, Ramirez JA, Vazquez M (2017) Polysaccharide-based films and coatings for food packaging: A review. Food Hydrocolloids 68:136–148. https://doi.org/10.1016/j.foodhyd.2016.09.009CrossRef

Cheng DDF, Urata DC, Yagihashi DM, Hozumi DA (2012) A statically oleophilic but dynamically oleophobic smooth nonperfluorinated surface. Angew Chem 51:2956–2959. https://doi.org/10.1002/anie.201108800CrossRef

Dallemand J, Monforti-Ferrario F, Linus FM, Scarlat N, Motola V (2015) Evaluation of energy potential of municipal solid waste from African urban areas. Renew Sustain Energy Rev 50:1269–1286. https://doi.org/10.1016/j.rser.2015.05.067CrossRef

Ding Q, Zeng J, Wang B, Gao W, Xu J (2017) Influence of binding mechanism on labeling efficiency and luminous properties of fluorescent cellulose nanocrystals. Carbohydr Polym 175:105–113. https://doi.org/10.1016/j.carbpol.2017.07.068CrossRefPubMed

Henrik K, Gällstedt M, Engström G, Järnström L (2009) Barrier and surface properties of chitosan-coated greaseproof paper. Carbohydr Polym 65:453–460. https://doi.org/10.1016/j.carbpol.2006.02.005CrossRef

Institution BS (2000) Methods of analysis of fats and fatty oils. Other methods. Determination of unsaponifiable matter. www.baidu.com/ISO 662:1998—Identical

Keskin G, Kızıl G, Bechelany M, Pochat-Bohatier C, Öner M (2018) Potential of polyhydroxyalkanoate (PHA) polymers family as substitutes of petroleum based polymers for packaging applications and solutions brought by their composites to form barrier materials. Pure Appl Chem 89:1841–1848. https://doi.org/10.1515/pac-2017-0401CrossRef

Koppolu R, Lahti J, Abitbol T, Swerin A, Kuusipalo J, Toivakka M (2019) Continuous processing of nanocellulose and polylactic acid into multilayer barrier coatings. ACS Appl Mater Interfaces 66:11920–11927. https://doi.org/10.1021/acsami.9b00922CrossRef

Li S, Pan X (2012) Hydrolysis of cellulose by cellulase-mimetic solid catalyst. Energy Environ Sci 5:6889–6894. https://doi.org/10.1039/C2EE03373ACrossRef

Li Z, Rabnawaz M (2019) Oil- and water-resistant coatings for porous cellulosic substrates. ACS Appl Polym Mater 1:103–111. https://doi.org/10.1021/acsapm.8b00106CrossRef

Ljungberg N, Bonini C, Bortolussi F, Boisson C, Heux L, Cavaillé JY (2016) New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: effect of surface and dispersion characteristics. Biomacromol 6:2732–2739. https://doi.org/10.1021/bm050222vCrossRef

Lu Y, Sathasivam S, Song J, Crick CR, Carmalt CJ, Parkin IP (2018) Robust self-cleaning surfaces that function when exposed to either air or oil. Science 347:1132–1135. https://doi.org/10.1126/science.aaa0946CrossRef

Mishra SP, Thirree J, Manent AS, Chabot B, Daneault C (2011) Ultrasound-catalyzed TEMPO-mediated oxidation of native cellulose for the production of nanocellulose: effect of process variables. BioResources 6:121–143. https://doi.org/10.1515/HF.2010.121CrossRef

Nandane AS, Dave RK, Ramana Rao TV (2017) Optimization of edible coating formulations for improving postharvest quality and shelf life of pear fruit using response surface methodology. J Food Sci Technol 54:1–8. https://doi.org/10.1007/s13197-016-2359-9CrossRefPubMed

Nouri L, Mohammadi Nafchi A (2014) Antibacterial, mechanical, and barrier properties of sago starch film incorporated with betel leaves extract. Int J Biol Macromol 66:254–259. https://doi.org/10.1016/j.ijbiomac.2014.02.044CrossRefPubMed

Paul UC et al (2017) Mineral oil barrier sequential polymer treatment for recycled paper products in food packaging. Mater Res Express. https://doi.org/10.1088/2053-1591/4/1/015501CrossRef

Qijun D, Jinsong Z, Bin W, Wenhua G, Kefu C (2018) Effect of retention rate of fluorescent cellulose nanofibrils on paper properties and structure. Carbohydr Polym Sci Technol Asp Ind Important Polysacch 186:73–81. https://doi.org/10.1016/j.carbpol.2018.01.040CrossRef

Qijun D, Jinsong Z, Bin W, Wenhua G, Kefu C (2019) Effect of nanocellulose fiber hornification on water fraction characteristics and hydroxyl accessibility during dehydration. Carbohydr Polym 207:44–51. https://doi.org/10.1016/j.carbpol.2018.11.075CrossRef

Qin ZY, Tong GL, Chin YCF, Zhou JC (2011) Preparation of ultrasonic-assisted high carboxylate content cellulose nanocrystals by TEMPO oxidation. BioResources 6:1136–1146. https://doi.org/10.15376/biores.6.2.1136-1146CrossRef

Saito T, Isogai A (2006) Introduction of aldehyde groups on surfaces of native cellulose fibers by TEMPO-mediated oxidation. Colloids Surf A Physicochem Eng Asp 289:219–225. https://doi.org/10.1016/j.colsurfa.2006.04.038CrossRef

Schaider LA et al (2017) Fluorinated compounds in U.S. fast food packaging. Environ Sci Technol Lett 4:105–111. https://doi.org/10.1021/acs.estlett.6b00435CrossRefPubMedPubMedCentral

Segal L, Creely JJ, Martin Jr AE, Conrad CM, (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794. https://doi.org/10.1177/004051755902901003CrossRef

Spoljaric S, Salminen A, Dang Luong N, Lahtinen P, Vartiainen J, Tammelin T, Seppälä J (2014) Nanofibrillated cellulose, poly(vinyl alcohol), montmorillonite clay hybrid nanocomposites with superior barrier and thermomechanical properties. Polym Compos 35:1117–1131. https://doi.org/10.1002/pc.22759CrossRef

Wang S, Gao W, Chen K, Xiang Z, Zeng J, Wang B, Xu J (2018) Deconstruction of cellulosic fibers to fibrils based on enzymatic pretreatment. Bioresour Technol 267:426–430. https://doi.org/10.1016/j.biortech.2018.07.067CrossRefPubMed

Wong TS, Kang SH, Tang SKY, Smythe EJ, Hatton BD, Grinthal A, Aizenberg J (2011) Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity. Nature 477:443–447. https://doi.org/10.1038/nature10447CrossRefPubMed

Wong TS, Kang SH, Tang SKY, Smythe EJ, Hatton BD, Grinthal A, Aizenberg J (2012) Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity. Nature 477:443–447. https://doi.org/10.1038/nature10447CrossRef

Yang CQ, Xu G (2004) Polymer-aldehyde additives to improve paper properties. US. https://US6379499 B1

Yoo SR, Lau SH, Krochta JM (2012) Grease penetration and browning resistance of pulpboard and paperboard coated with whey protein. Packag Technol Sci 25:259–270. https://doi.org/10.1002/pts.977CrossRef

Zeng J, Hu F, Cheng Z, Wang B, Chen K (2021) Isolation and rheological characterization of cellulose nanofibrils (CNFs) produced by microfluidic homogenization, ball-milling, grinding and refining. Cellulose 28:1–20. https://doi.org/10.1007/s10570-021-03702-3CrossRef

Zhang J, Wu J, Cao Y, Sang S, Zhang J, He J (2009) Synthesis of cellulose benzoates under homogeneous conditions in an ionic liquid. Cellulose 16:299–308. https://doi.org/10.1007/s10570-008-9260-2CrossRef

Titel: The fluorine-free coating has excellent hydrophobic and oleophobic properties for porous cellulose-based materials
verfasst von: Peng Du
Qijun Ding
Chuanshan Zhao
Yifei Jiang
Wenjia Han
Xia Li
Publikationsdatum: 27.05.2021
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 10/2021
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-021-03959-8

Springer Professional

Abstract

Graphic abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 10/2021

In-situ synthesis and immobilization of silver nanoparticles on microfibrillated cellulose for long-term antibacterial applications

Comparative study of electrically conductive cotton fabric prepared through the in situ synthesis of different conductive materials

Recrystallization and size distribution of dislocated segments in cellulose microfibrils—a molecular dynamics perspective

Mechanical enhancement of cellulose nanofibril (CNF) films through the addition of water-soluble polymers

Biosafety evaluation and quantitative determination of poly(hexamethylene biguanide) (PHMB) coated on cellulosic fabrics by Kubelka–Munk equation

One step in situ synthesis of Ag/AgCl nanoparticles in a cellulose nanofiber matrix for the development of energy storage paper