nach oben

Journal of Intelligent Manufacturing

Erschienen in:

14.02.2020

Towards an automated decision support system for the identification of additive manufacturing part candidates

verfasst von: Sheng Yang, Thomas Page, Ying Zhang, Yaoyao Fiona Zhao

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 8/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

As additive manufacturing (AM) continues to mature, an efficient and effective method to identify parts which are eligible for AM as well as gaining insight on what values it may add to a product is needed. Prior methods are naturally developed and highly experience-dependent, which falls short for its objectiveness and transferability. In this paper, a decision support system (DSS) framework for automatically determining the candidacy of a part or assembly for AM applications is proposed based on machine learning (ML) and carefully selected candidacy criteria. With the goal of supporting efficient candidate screening in the early conceptual design stage, these criteria are further individually decoded to decisive parameters which can be extracted from digital models or resource planning databases. Over 200 existing industrial examples are manually collected and labelled as training data; meanwhile, multiple regression algorithms are tested against each AM potential to find better predictive performance. The proposed DSS framework is implemented as a web application with integrated cloud-based database and ML service, which allows advantages of easy maintenance, upgrade, and retraining of ML models. Two case studies of a hip implant and a throttle pedal are used as demonstrating examples. This preliminary work provides a promising solution for lowering the requirements of non-AM experts to find suitable AM candidates.

Vorheriger Artikel Unsupervised rotating machinery fault diagnosis method based on integrated SAE–DBN and a binary processor

Nächster Artikel Nonlinear time-series modeling of feed drive system based on motion states classification

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

ADML (Additive Design and Manufacturing Laboratory) (2019a). ADML website app. GitHub. Retrieved September 9, 2019, from https://github.com/adml-mcgill/website/tree/master/app.

ADML (Additive Design and Manufacturing Laboratory) (2019b). Automated candidate detection for additive manufacturing (BETA). ADML. Retrieved September 9, 2019, from http://adml.lab.mcgill.ca/app/.

Aoyagi, K., Wang, H., Sudo, H., & Chiba, A. (2019). Simple method to construct process maps for additive manufacturing using a support vector machine. Additive Manufacturing, 27, 353–362.

ASTM International F42.91. (2015). Standard terminology for additive manufacturing—general principles—terminology. West Conshohocken: ASTM International.

Babic, B., Nesic, N., & Miljkovic, Z. (2008). A review of automated feature recognition with rule-based pattern recognition. Computers in Industry, 59(4), 321–337.

Baumers, M., Tuck, C., Wildman, R., Ashcroft, I., & Hague, R. (2017). Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? Journal of Industrial Ecology, 21(S1), 157–167.

Bogers, M., Hadar, R., & Bilberg, A. (2016). Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing. Technological Forecasting and Social Change, 102, 225–239.

Booth, J. W., Alperovich, J., Chawla, P., Ma, J., Reid, T. N., & Ramani, K. (2017). The design for additive manufacturing worksheet. Journal of Mechanical Design, 139(10), 100904.

Caligiana, G., Liverani, A., Francia, D., Frizziero, L., & Donnici, G. (2017). Integrating QFD and TRIZ for innovative design. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 11(2), JAMDSM0015-JAMDSM0015.

Chaturved, A. R., Hutchinson, G. K., & Nazareth, D. L. (1992). A synergistic approach to manufacturing systems control using machine learning and simulation. Journal of Intelligent Manufacturing, 3(1), 43–57. https://doi.org/10.1007/BF01471750.CrossRef

Coadou, Y. (2013). Boosted decision trees and applications. EPJ Web of Conferences (EDP Sciences), 55, 02004.

Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., et al. (2014). Making sense of 3-D printing: creating a map of additive manufacturing products and services. Additive Manufacturing, 1, 64–76.

Dalkir, K. (2013). Knowledge management in theory and practice. Cambridge: The MIT Press.

Deppe, C., Lindemann, C., & Koch, R. (2015). Development of an economic decision support for the application of additive manufacturing in aerospace. In 2015 Annual international solid freeform fabrication symposium, Austin, Texas, USA, August 10–12.

Doubrovski, Z., Verlinden, J. C., & Geraedts, J. M (2011). Optimal design for additive manufacturing: Opportunities and challenges. In ASME 2011 international design engineering technical conferences and computers and information in engineering conference (pp. 635–646). August 28–31, 2011. Washington, DC, USA.

Dvorak, F., Micali, M., & Mathieug, M. (2018). Planning and scheduling in additive manufacturing. Inteligencia Artificial, 21(62), 40–52.

Elith, J., Leathwick, J. R., & Hastie, T. (2008). A working guide to boosted regression trees. Journal of Animal Ecology, 77(4), 802–813.

Facebook OpenSource (2019). React: A JavaScript library for building user interfaces. Faceook. Retrieved September 10, 2019, from https://reactjs.org/.

Fera, M., Macchiaroli, R., Fruggiero, F., & Lambiase, A. (2018). A new perspective for production process analysis using additive manufacturing—complexity vs production volume. The International Journal of Advanced Manufacturing Technology, 95(1), 673–685. https://doi.org/10.1007/s00170-017-1221-1.CrossRef

Fontana, F., Klahn, C., & Meboldt, M. (2019). Value-driven clustering of industrial additive manufacturing applications. Journal of Manufacturing Technology Management, 30(2), 366–390.

Francis, J., & Bian, L. (2019). Deep learning for distortion prediction in laser-based additive manufacturing using big data. Manufacturing Letters, 20, 10–14.

Fraunhofer IWU (2017). Design for additive manufacturing-guidelines and case studies for metal applications. Presented in Canadian manufacturing technology show. September 25–28, 2017. Toronto, Canada.

Fuentes, E. (2012). Hip replacement prosthesis. GrabCAD. Retrieved September 10, 2019 from https://grabcad.com/library/hip-replacementprosthesis.

Géron, A. (2019). Hands-on machine learning with scikit-learn, keras, and tensorflow: concepts, tools, and techniques to build intelligent systems. Sebastopol: O’Reilly Media.

Ghani, K. A., Jayabalan, V., & Sugumar, M. (2002). Impact of advanced manufacturing technology on organizational structure. The Journal of High Technology Management Research, 13(2), 157–175.

Hamel, C. M., Roach, D. J., Long, K. N., Demoly, F., Dunn, M. L., & Qi, H. J. (2019). Machine-learning based design of active composite structures for 4D printing. Smart Materials and Structures, 28(6), 065005.

Hartmann, T., Moawad, A., Fouquet, F., Nain, G., Klein, J., Traon, Y. L., et al. (2017). Model-driven analytics: Connecting data, domain knowledge, and learning. arXiv preprint arXiv:1704.01320.

Hasan, S., & Rennie, A. (2008). The application of rapid manufacturing technologies in the spare parts industry. In: Nineteenth annual international solid freeform fabrication (SFF) symposium, August 4–8 2008, Austin, TX, USA.

Hastie, T., Tibshirani, R., Friedman, J., & Franklin, J. (2005). The elements of statistical learning: Data mining, inference and prediction. The Mathematical Intelligencer, 27(2), 83–85.

Holmström, J., Partanen, J., Tuomi, J., & Walter, M. (2010). Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment. Journal of manufacturing technology management, 21(6), 687–697.

Huang, S. H., Dismukes, J. P., Shi, J., & Su, Q. (2002). Manufacturing system modeling for productivity improvement. Journal of Manufacturing Systems, 21(4), 249.

Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013). Additive manufacturing and its societal impact: A literature review. The International Journal of Advanced Manufacturing Technology, 67(5–8), 1191–1203.

Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., et al. (2016). Energy and emissions saving potential of additive manufacturing: The case of lightweight aircraft components. Journal of Cleaner Production, 135, 1559–1570.

ICTC (Information and Communications Technology Council of Canada) (2017). Additive manufacturing in Canada: the impending talent paradigm. Canada Makes. Retrieved September 9, 2019, from https://www.ictc-ctic.ca/wp-content/uploads/2017/07/ICTC-Additive-Manufacturing-ENG-Final.pdf.

Joshi, D., & Ravi, B. (2010). Quantifying the shape complexity of cast parts. Computer-Aided Design and Applications, 7(5), 685–700.

Jurkovic, Z., Cukor, G., Brezocnik, M., & Brajkovic, T. (2018). A comparison of machine learning methods for cutting parameters prediction in high speed turning process. Journal of Intelligent Manufacturing, 29(8), 1683–1693. https://doi.org/10.1007/s10845-016-1206-1.CrossRef

Kellens, K., Mertens, R., Paraskevas, D., Dewulf, W., & Duflou, J. (2016). Environmental impact of additive manufacturing processes: Does AM contribute to a more sustainable way of part manufacturing? Procedia CIRP, 61, 582–587.

Klahn, C., Leutenecker, B., & Meboldt, M. (2014). Design for additive manufacturing–supporting the substitution of components in series products. Procedia CIRP, 21, 138–143.

Knofius, N., van der Heijden, M. C., & Zijm, W. (2016). Selecting parts for additive manufacturing in service logistics. Journal of Manufacturing Technology Management, 27(7), 915–931.

Knofius, N., van der Heijden, M. C., & Zijm, W. H. (2019). Consolidating spare parts for asset maintenance with additive manufacturing. International Journal of Production Economics, 208, 269–280.

Kruse, A., Reiher, T., & Koch, R. (2017). Integrating AM into existing companies-selection of existing parts for increase of acceptance. In Austin: 28th annual international solid freeform fabrication symposium proceedings (pp. 2575–2585). August 7–9 2017, Austin, Texas, USA.

Laverne, F., Segonds, F., Anwer, N., & Marc, L. (2015). Assembly-based methods to support product innovation in design for additive manufacturing: An exploratory case study. Journal of Mechanical Design, 137(12), 121701.

Leutenecker-Twelsiek, B., Ferchow, J., Klahn, C., & Meboldt, M (2017). The experience transfer model for new technologies-application on design for additive manufacturing. In International conference on additive manufacturing in products and applications (pp. 337–346). September 13–15, Zurich, Switzerland.

Li, Z., Zhang, Z., Shi, J., & Wu, D. (2019). Prediction of surface roughness in extrusion-based additive manufacturing with machine learning. Robotics and Computer-Integrated Manufacturing, 57, 488–495.

Lindemann, C., Reiher, T., Jahnke, U., & Koch, R. (2015). Towards a sustainable and economic selection of part candidates for additive manufacturing. Rapid Prototyping Journal, 21(2), 216–227.

Lovatt, A. M., & Shercliff, H. R. (1998). Manufacturing process selection in engineering design. Part 1: The role of process selection. Materials and Design, 19(5), 205–215. https://doi.org/10.1016/S0261-3069(98)00038-7.CrossRef

Lu, T. (2016). Towards a fully automated 3D printability checker. In 2016 IEEE International Conference on Industrial Technology (ICIT) (pp. 922–927). March 14–17, Taibei, Taiwan.

Materialise (2014). 3D Print Barometer: 5 parameters that decide the success of your 3D Printing project. Materialise. Retrieved August 29, 2019, from http://3dprintbarometer.com/.

Matos, F., Godina, R., Jacinto, C., Carvalho, H., Ribeiro, I., & Peças, P. (2019). Additive manufacturing: Exploring the social changes and impacts. Sustainability, 11(14), 3757.

Merkt, S., Hinke, C., Schleifenbaum, H., & Voswinckel, H. (2012). Geometric complexity analysis in an integrative technology evaluation model (ITEM) for selective laser melting (SLM). South African Journal of Industrial Engineering, 23(2), 97–105.

Microsoft Azure (2014a). Azure Machine Learning Studio: algorithm and module help. Microsoft Azure. Retrieved September 9, 2019, from https://docs.microsoft.com/en-us/azure/machine-learning/studio-module-reference/.

Microsoft Azure (2014b). Microsoft azure machine learning studio. Microsoft. Retrieved September 7, 2019, from https://studio.azureml.net/.

Miessner, H. (2015). Throttle pedal design challenge. GrabCAD. Retrieved September 9, 2019, from https://grabcad.com/library/pedal-one-microtechnologies-1.

Page, T. D., Yang, S., & Zhao, Y. F (2019). Automated candidate detection for additive manufacturing: a framework proposal. In Proceedings of the design society: international conference on engineering design (pp. 679–688). August 5–8, Delft, The Netherlands.

Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M., & Ituarte, I. F. (2016). Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Annals-Manufacturing Technology, 65(1), 29–32.

Patel, L. (2015). What are the main differences between TensorFlow and SciKit Learn? Quora. Retrieved December 10, 2019, https://www.quora.com/What-are-the-main-differences-between-TensorFlow-and-SciKit-Learn.

Pedregosa, F., Varoquaux, G., Gramfort, A., Michel, V., Thirion, B., Grisel, O., et al. (2011). Scikit-learn: Machine learning in Python. Journal of machine learning research, 12, 2825–2830.

Penumuru, D. P., Muthuswamy, S., & Karumbu, P. (2019). Identification and classification of materials using machine vision and machine learning in the context of industry 4.0. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-019-01508-6.CrossRef

Priarone, P. C., & Ingarao, G. (2017). Towards criteria for sustainable process selection: On the modelling of pure subtractive versus additive/subtractive integrated manufacturing approaches. Journal of Cleaner Production, 144, 57–68. https://doi.org/10.1016/j.jclepro.2016.12.165.CrossRef

Raudys, S. J., & Jain, A. K. (1991). Small sample size effects in statistical pattern recognition: Recommendations for practitioners. IEEE Transactions on Pattern Analysis and Machine Intelligence, 3, 252–264.

Reiher, T., Lindemann, C., Jahnke, U., Deppe, G., & Koch, R. (2017). Holistic approach for industrializing AM technology: From part selection to test and verification. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-017-0018-y.CrossRef

Report, Wohlers. (2018). Additive manufacturing and 3D printing state of the industry: annual worldwide progress report. Colorado: Fort Collins.

Rodríguez, G. G., Gonzalez-Cava, J. M., & Pérez, J. A. M. (2019). An intelligent decision support system for production planning based on machine learning. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-019-01510-y.CrossRef

Roe, B. P., Yang, H.-J., Zhu, J., Liu, Y., Stancu, I., & McGregor, G. (2005). Boosted decision trees as an alternative to artificial neural networks for particle identification. Nuclear Instruments & Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment, 543(2–3), 577–584.

Rozvany, G. I. (2009). A critical review of established methods of structural topology optimization. Structural and Multidisciplinary Optimization, 37(3), 217–237.

Ryan, G., Pandit, A., & Apatsidis, D. P. J. B. (2006). Fabrication methods of porous metals for use in orthopaedic applications. Biomaterials, 27(13), 2651–2670.

Senvol LLC. (2017). 7 scenarios table to adopt additive manufacturing. Senvol. Retrieved August 29, 2019, from http://senvol.com/additive-manufacturing/7-scenarios-table/.

Tang, Y., Kurtz, A., & Zhao, Y. F. (2015). Bidirectional evolutionary structural optimization (BESO) based design method for lattice structure to be fabricated by additive manufacturing. Computer-Aided Design, 69, 91–101.

Tang, Y., Mak, K., & Zhao, Y. F. (2016a). A framework to reduce product environmental impact through design optimization for additive manufacturing. Journal of Cleaner Production, 137, 1560–1572.

Tang, Y., Yang, S., & Zhao, Y. F. (2016b). Sustainable design for additive manufacturing through functionality integration and part consolidation. In S. S. Muthu & M. M. Savalani (Eds.), Handbook of sustainability in additive manufacturing (pp. 101–144). Singapore: Springer.

Tedia, S., & Williams, C. B. Manufacturability analysis tool for additive manufacturing using voxel-based geometric modeling. In 27th annual international solid freeform fabrication (SFF) symposium (pp. 3–22). August 8–10 2016, Austin, TX, USA.

TensorFlow (2020). An end-to-end open source machine learning platform. TensorFlow Org. Retrieved January 20, 2020, from https://www.tensorflow.org/.

Thomas, D. (2016). Costs, benefits, and adoption of additive manufacturing: a supply chain perspective. The International Journal of Advanced Manufacturing Technology, 85(5–8), 1857–1876.

Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., et al. (2016). Design for additive manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals-Manufacturing Technology, 65(2), 737–760.

Tuck, C. J., Hague, R. J., Ruffo, M., Ransley, M., & Adams, P. (2008). Rapid manufacturing facilitated customization. International Journal of Computer Integrated Manufacturing, 21(3), 245–258.

Valentan, B., Brajlih, T., Drstvensek, I., & Balic, J. (2008). Basic solutions on shape complexity evaluation of STL data. Journal of Achievements in Materials and Manufacturing Engineering, 26(1), 73–80.

Watson, J. K., & Taminger, K. M. B. (2015). A decision-support model for selecting additive manufacturing versus subtractive manufacturing based on energy consumption. Journal of Cleaner Production, 176, 1316–1322. https://doi.org/10.1016/j.jclepro.2015.12.009.CrossRef

Xia, Y., Liu, C., Li, Y., & Liu, N. (2017). A boosted decision tree approach using Bayesian hyper-parameter optimization for credit scoring. Expert Systems with Applications, 78, 225–241.

Xometry (2017). Instant quoting add-in for SOLIDWORKS and Autodesk Inventor. Retrieved September 7, 2019, from https://www.xometry.com/cad-add-in-downloads.

Yang, S., Min, W., Ghibaudo, J., & Zhao, Y. F. (2019a). Understanding the sustainability potential of part consolidation design supported by additive manufacturing. Journal of Cleaner Production, 232, 722–738.

Yang, S., Page, T., & Zhao, Y. F. (2019b). Understanding the role of additive manufacturing knowledge in stimulating design innovation for novice designers. Journal of Mechanical Design, 141(2), 021703.

Yang, S., Santoro, F., Sulthan, M. A., & Zhao, Y. F. (2019c). A numerical-based part consolidation candidate detection approach with modularization considerations. Research in Engineering Design, 30(1), 63–83. https://doi.org/10.1007/s00163-018-0298-3.CrossRef

Yang, S., Santoro, F., & Zhao, Y. F. (2018). Towards a numerical approach of finding candidates for additive manufacturing-enabled part consolidation. Journal of Mechanical Design, 140(4), 041701–041713. https://doi.org/10.1115/1.4038923.CrossRef

Yang, S., & Zhao, Y. F. (2018). Additive manufacturing-enabled part count reduction: a lifecycle perspective. Journal of Mechanical Design, 140(3), 031702–031712. https://doi.org/10.1115/1.4038922.CrossRef

Yang, W. A. (2016). Simultaneous monitoring of mean vector and covariance matrix shifts in bivariate manufacturing processes using hybrid ensemble learning-based model. Journal of Intelligent Manufacturing, 27(4), 845–874. https://doi.org/10.1007/s10845-014-0920-9.CrossRef

Yao, X., Moon, S. K., & Bi, G. (2017). A hybrid machine learning approach for additive manufacturing design feature recommendation. Rapid Prototyping Journal, 23(6), 983–997.

Zhang, Y., Jedeck, S., Yang, L., & Bai, L. (2018). Modeling and analysis of the on-demand spare parts supply using additive manufacturing. Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-01-2018-0027.CrossRef

Titel: Towards an automated decision support system for the identification of additive manufacturing part candidates
verfasst von: Sheng Yang
Thomas Page
Ying Zhang
Yaoyao Fiona Zhao
Publikationsdatum: 14.02.2020
Verlag: Springer US
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 8/2020
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-020-01545-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2020

Swarm intelligence based centralized clustering: a novel solution

Design optimization by integrating limited simulation data and shape engineering knowledge with Bayesian optimization (BO-DK4DO)

Two-sided matching decision-making model with hesitant fuzzy preference information for configuring cloud manufacturing tasks and resources

Activation functions selection for BP neural network model of ground surface roughness

Nonlinear time-series modeling of feed drive system based on motion states classification

Pricing strategy and system performance in a cloud-based manufacturing system built on blockchain technology

Premium Partner

Marktübersichten