nach oben

Journal of Materials Science

Erschienen in:

14.03.2020 | Polymers & biopolymers

Reduced fire hazards of expandable polystyrene building materials via intumescent flame-retardant coatings

verfasst von: Xiaoming Shao, Yuqian Du, Xingfu Zheng, Jingchao Wang, Yuchao Wang, Shuai Zhao, Zhenxiang Xin, Lin Li

Erschienen in: Journal of Materials Science | Ausgabe 17/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Despite great advances, fire safety is a permanent challenge in expanded polystyrene (EPS) foam specially used as the thermal insulating external wall in buildings and constructions. Herein, an effective flame-retardant architecture consisting of phenolic epoxy resin (PER), ammonium polyphosphate (APP) and tannic acid functionalized graphene (TGE) was successfully fabricated and coated on the surface of EPS foam plate (EPS/ATG) to achieve excellent flame retardancy and thermally insulating properties. This surface coating is equivalent to protective “shield” for expanded polystyrene foam plate. The PER/APP/TGE paintcoat with a ratio of 20:20:0.65 imparted superior fire safety to EPS foam, exhibiting a high limiting oxygen index value of 35.50%, and a UL-94 V-0 classification was achieved with only 300 um of flame-retardant layer thickness. Cone calorimeter test results showed that EPS/ATG20 foam plate was more efficient in decreasing the peak heat release rate by 53.8% and prolonging ignition time by 75.7 times in comparison with the EPS foam plate. Thermal conductivity of the EPS/ATG20 foam plate just increased from 0.048 W/m K of EPS foam plate to 0.053 W/m K. The PER/APP/TGE paintcoat not only endowed excellent flame retardancy to EPS/ATG foam plates, but maintained desirable thermal insulation properties.

Vorheriger Artikel Effect of La addition on microstructure evolution of hypoeutectic Al–6Si alloys

Nächster Artikel Correction to: Maturation process of natural resins recorded in their thermal properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Wang JL, Zhang DC, Zhang Y, Cai W, Yao CX, Hu Y, Hu WZ (2019) Construction of multifunctional boron nitride nanosheet towards reducing toxic volatiles (CO and HCN) generation and fire hazard of thermoplastic polyurethane. J Hazard Mater 362:482–494CrossRef

Wang JL, Ma C, Mu XW, Cai W, Liu LX, Zhou X, Hu WZ, Hu Y (2018) Construction of multifunctional MoSe₂ hybrid towards the simultaneous improvements in fire safety and mechanical property of polymer. J Hazard Mater 352:36–46. https://doi.org/10.1016/j.jhazmat.2018.03.003 CrossRef

Yuan BH, Sun YR, Chen XF, Shi YQ, Dai HM, He S (2018) Poorly-well-dispersed graphene: abnormal influence on flammability and fire behavior of intumescent flame retardant. Compos A Appl Sci Manuf 109:345–354CrossRef

Jiao CM, Wang HZ, Li SX, Chen XL (2017) Fire hazard reduction of hollow glass microspheres in thermoplastic polyurethane composites. J Hazard Mater 332:176–184CrossRef

Shi YQ, Yu B, Zhou KQ, Yuen RKK, Gui Z, Hu Y, Jiang SH (2015) Novel CuCo₂O₄/graphitic carbon nitride nanohybrids: Highly effective catalysts for reducing CO generation and fire hazards of thermoplastic polyurethane nanocomposites. J Hazard Mater 293:87–96. https://doi.org/10.1016/j.jhazmat.2015.03.041 CrossRef

Chen XL, Jiang YF, Jiao CM (2014) Smoke suppression properties of ferrite yellow on flame retardant thermoplastic polyurethane based on ammonium polyphosphate. J Hazard Mater 266:114–121. https://doi.org/10.1016/j.jhazmat.2013.12.025 CrossRef

Xiao YL, Jin ZY, He LX, Ma SC, Wang CY, Mu XW, Song L (2020) Synthesis of a novel graphene conjugated covalent organic framework nanohybrid for enhancing the flame retardancy and mechanical properties of epoxy resins through synergistic effect. Compos B Eng 182:107616–107626. https://doi.org/10.1016/j.compositesb.2019.107616 CrossRef

Demirel B (2013) Optimization of the composite brick composed of expanded polystyrene and pumice blocks. Constr Build Mater 40:306–313. https://doi.org/10.1016/j.conbuildmat.2012.11.008 CrossRef

Raps D, Hossieny N, Park CB, Altstädt V (2015) Past and present developments in polymer bead foams and bead foaming technology. Polymer 56:5–19. https://doi.org/10.1016/j.polymer.2014.10.078 CrossRef

10.

Schellenberg J, Wallis M (2010) Dependence of properties of expandable polystyrene particle foam on degree of fusion. J Appl Polym Sci 115:2986–2990. https://doi.org/10.1022/app.31397 CrossRef

11.

Hong Y, Fang X, Yao D (2015) Processing of composite polystyrene foam with a honeycomb structure. Polym Eng Sci 55:1494–1503. https://doi.org/10.1002/pen.24099 CrossRef

12.

Wang S, Chen H, Liu N (2015) Ignition of expandable polystyrene foam by a hot particle: an experimental and numerical study. J Hazard Mater 283:536–543. https://doi.org/10.1016/j.jhazmat.2014.09.033 CrossRef

13.

Heibl J, Vetter W (2007) Detection of hexabromocyclododecane and its metabolite pentabromocyclodedecane in chicken egg and fish from the official food control. J Agric Food Chem 55:3319–3324. https://doi.org/10.1021/jf063428b CrossRef

14.

Covaci A, Gerecke AC, Law RJ, Voorspoels S, Kohler M, Heeb NV, Leslie H, Allchin CR, De Boer J (2006) Hexabromocyclododecanes (HBCDs) in the environment and humans: a review. Environ Sci Technol 40:3679–3688. https://doi.org/10.1021/es0602492 CrossRef

15.

Shaw SD, Blum A, Weber R, Kannan K, Rich D, Lucas D, Koshland CP, Dobraca D, Hanson S, Birnbaum LS (2010) Halogenated flame retardants: do the fire safety benefits justify the risks. Rev Environ Health 25:261–305. https://doi.org/10.1515/reveh.2010.25.4.261 CrossRef

16.

Wu D, Zhao P, Zhang M, Liu Y (2013) Preparation and properties of flame retardant rigid polyurethane foam with phosphorus-nitrogen intumescent flame retardant. High Perform Polym 25:868–875. https://doi.org/10.1177/0954008313489997 CrossRef

17.

Chen X, Liu Y, Bai S, Wang Q (2014) Macromolecular nitrogen-phosphorous compound/expandable graphite synchronous expansion flame retardant polystyrene foam. Polym Plast Technol Eng 53:1402–1407. https://doi.org/10.1080/03602559.2014.909473 CrossRef

18.

Wang LY, Wang C, Liu PW, Jing ZJ, Ge XS, Jiang YJ (2018) The flame resistance properties of expandable polystyrene foams coated with a cheap and effective barrier layer. Constr Build Mater 176:403–414. https://doi.org/10.1016/j.conbuildmat.2018.05.023 CrossRef

19.

Zhu ZM, Xu YJ, Liao W, Xu SM, Wang YZ (2017) Highly flame retardant expanded polystyrene foams from phosphorus-nitrogen-silicon synergistic adhesives. Ind Eng Chem Res 56:4649–4658. https://doi.org/10.1021/acs.iecr.6b05065 CrossRef

20.

Kandola BK, Krishnan L, Ebdon JR (2014) Blends of unsaturated polyester and phenolic resins for application as fire-resistant matrices in fire-reinforced composites: effects of added flame retardants. Polym Degrad Stabil 106:129–137. https://doi.org/10.1016/j.polymdegradstab.2013.12.021 CrossRef

21.

Holder KM, Smith RJ, Grunlan JC (2017) A review of flame retardant nanocoatings prepared using layer-by-layer assembly of polyelectrolytes. J Mater Sci 52:12923–12959. https://doi.org/10.1007/s10853-017-1390-1 CrossRef

22.

Richardson JJ, Bjornmalm M, CarusoMultilayer F (2015) Assembly, Technology-driven layer-by-layer assembly of nanofilms. Science 348:2491–2501. https://doi.org/10.1126/science.aaa2491 CrossRef

23.

Li L, Liu XL, Shao XM, Jiang LC, Huang K, Zhao S (2020) Synergistic effects of a highly effective intumescent flame retardant based on tannic acid functionalized graphene on the flame retardancy and smoke suppression properties of natural rubber. Compos A 129:105715–105725. https://doi.org/10.1016/j.compositesa.2019.105715 CrossRef

24.

Gu J, Yang X, Li C, Kou K (2016) Synthesis of cyanate ester microcapsules via solvent evaporation technique and its application in epoxy resins as a healing agent. Ind Eng Chem Res 55:10941–10946. https://doi.org/10.1021/acs.iecr.6b03093 CrossRef

25.

Shi YQ, Yu B, Zheng YY, Yang J, Duan ZP, Hu Y (2018) Design of reduced graphene oxide decorated with DOPO phosphanomidate for enhanced fire safety of epoxy resin. J Colloid Interface Sci 521:160–171. https://doi.org/10.1016/j.jcis.2018.02.054 CrossRef

26.

Zhao S, Xie SC, Zhao Z, Zhang JL, Li L, Xin ZX (2018) Green and high-efficiency production of graphene by tannic acid assisted exfoliation of graphite in water. ACS Sustain Chem Eng 6:7652–7661. https://doi.org/10.1021/acssuschemeng.8b00497 CrossRef

27.

Zhao Z, Li L, Shao XM, Liu XL, Zhao S, Xie SC, Xin ZX (2018) Tannic acid-assisted green fabrication of functionalized graphene towards its enhanced compatibility in NR nanocomposite. Polym Test 70:396–402. https://doi.org/10.1016/j.polymertesting.2018.07.020 CrossRef

28.

Kim YO, Cho J, Yeo H, Lee BW, Moon BJ, Ha YM, Jung YC (2019) Flame retardant epoxy derived from tannic acid as bio-based hardener. ACS Sustain Chem Eng 7:3858–3865. https://doi.org/10.1021/acssuschemeng.8b04851 CrossRef

29.

Liu G, Chen W, Yu J (2010) A novel process to prepare ammonium polyphosphate with crystalline form II and its comparison with melamine polyphosphate. Ind Eng Chem Res 49:12148–12155. https://doi.org/10.1021/ie1014102 CrossRef

30.

Laoutid F, Karaseva V, Costes L, Brohez S, Mincheva R, Dubois P (2018) Novel bio-based flame retardant systems derived from tannic acid. J Renew Mater 6:559–572. https://doi.org/10.32604/jrm.2018.00004 CrossRef

31.

Shao ZB, Deng C, Tan Y, Yu L, Chen MJ (2014) Ammonium polyphosphate chemically-modified with ethanolamine as an efficient intumescent flame retardant for polypropylene. J Mater Chem A 2:13955–13965. https://doi.org/10.1039/c4ta02778g CrossRef

32.

Schartel B, Hull TR (2007) Development of fire-retarded materials-interpretation of cone calorimeter data. Fire Mater 31:327–354. https://doi.org/10.1002/fam.949 CrossRef

33.

Bourbigot S, Bras ML, Delobel R, Bréant P, Trémillon JM (1995) Carbonization mechanisms resulting from intumescence-part II. Association with an ethylene terpolymer and the ammonium polyphosphate-pentaerythritol fire retardant system. Carbon 33:283–294. https://doi.org/10.1016/0008-6223(94)00131-I CrossRef

34.

Lewin M (2001) Synergism and catalysis in flame retardancy of polymers. Polym Adv Technol 12:215–222. https://doi.org/10.1002/pat.132 CrossRef

35.

Horrocks AR, Smart G, Nazare S, Kandola B, Price D (2009) Quantification of zinc hydroxystannate and stannate synergies in halogen-containing flame-retardant olymeric formulations. J Fire Sci 28:217–248. https://doi.org/10.1177/0734904109344302 CrossRef

36.

Li ME, Yan YW, Zhao HB, Jian RK, Wang YZ (2020) A facile and efficient flame-retardant and smoke-suppressant resin coating for expanded polystyrene foams. Compos B 185:107797–107803. https://doi.org/10.1016/j.compositesb.2020.107797 CrossRef

37.

Jing J, Zhang Y, Fang ZP, Wang DY (2018) Core-shell flame retardant/graphene oxide hybrid: a self-assembly strategy towards reducing fire hazard and improving toughness of polylactic acid. Compos Sci Technol 165:161–167. https://doi.org/10.1016/j.compscitech.2018.06.024 CrossRef

38.

Guo WW, Yu B, Yuan Y, Song L, Hu Y (2017) In situ preparation of reduced graphene oxide/DOPO-based phosphonamidate hybrids towards high-performance epoxy nanocomposites. Compos B 123:154–164. https://doi.org/10.1016/j.compositesb.2017.05.024 CrossRef

39.

Xu WZ, Wang XL, Wu Y, Li W, Chen CY (2019) Functionalized graphene with Co-ZIF adsorbed borate ions as an effective flame retardant and smoke suppression agent for epoxy resin. J Hazard Mater 363:138–151. https://doi.org/10.1016/j.jhazmat.2018.09.086 CrossRef

40.

Khalili P, Liu XL, Kim YT, Rudd C, Yi XS, Kong I (2019) Development of fire retardancy of natural fiber composite encouraged by a synergy between zinc borate and ammonium polyphosphate. Compos Part B 159:165–172. https://doi.org/10.1016/j.compositesb.2018.09.036 CrossRef

41.

Zhao HB, Chen MJ, Chen HB (2017) Thermally insulating and flame-retardant polyaniline/pectin aerogels. ACS Sustain Chem Eng 5:7012–7019. https://doi.org/10.1021/acssuschemeng.7b01247 CrossRef

42.

Urquiaga I, Leighton F (2000) Plant polyphenol antioxidants and oxidative stress. Biol Res 33:55–64. https://doi.org/10.4067/s0716-97602000000200004 CrossRef

43.

Dresselhaus M, Dresselhaus G, Jorio A, Souza Filho A, Saito R (2002) Raman spectroscopy on isolated single wall carbon nanotubes. Carbon 40:2043–2061. https://doi.org/10.1016/S0008-6223(02)00066-0 CrossRef

44.

Tuinstra F, Koening JL (1970) Raman spectrum of graphite. J Chem Phys 53:1126–1130. https://doi.org/10.1063/1.1674108 CrossRef

45.

Ferrari AC, Robertson J (2000) Interpretation of Raman spectra of disordered and amorphous carbon. Phys Rev B 61:14095–14107. https://doi.org/10.1103/PhysRevB.61.14095 CrossRef

46.

Bourbigot S, Le Bras M, Delobel R, Decressain R, Amoureux JP (1996) Synergistic effect of zeolite in an intumescence process: study of the carbonaceous structures using solid-state NMR. J Chem Soc Faraday Trans 92:149–158. https://doi.org/10.1039/FT9969200149 CrossRef

47.

Hu S, Song L, Pan HF, Hu Y (2012) Thermal properties and combustion behaviors of chitosan based flame retardant combining phosphorus and nickel. Ind Eng Chem Res 51:3663–3669. https://doi.org/10.1021/ie2022527 CrossRef

48.

Song L, Wu K, Wang Y, Wang Z, Hu Y (2009) Flammability and thermo-oxidative decomposition of epoxy resin containing ammonium polyphosphate and metallic oxide. J Macromol Sci Pure Appl Chem 46:290–295. https://doi.org/10.1080/10601320802637359 CrossRef

49.

Guo W, Yu B, Yuan Y, Song L, Hu Y (2017) In situ preparation of reduced graphene oxide/DOPO-based phosphonamidate hybrids towards high-performance epoxy nanocomposites. Compos Part B Eng 123:154–164. https://doi.org/10.1016/j.compositesb.2017.05.024 CrossRef

50.

Wang W, Yuan Y, Yu B, Liew KM, Yuen RKK, Liu J, Hu Y (2020) Controlled self-template synthesis of manganese-based cuprous oxide nanoplates towards improved fire safety properties of epoxy composites. J Hazard Mater 387:122006–122013. https://doi.org/10.1016/j.jhazmat.2019.122006 CrossRef

51.

Chiang CL, Ma CCM (2004) Synthesis, characterization, thermal properties and flame retardance of novel phenolic resin/silica nanocomposites. Polym Degrad Stab 83:207–214. https://doi.org/10.1016/s0141-3910(03)00262-3 CrossRef

52.

Isitman NA, Kaynak C (2012) Effect of partial substitution of aluminum hydroxide with colemanite in fire retarded low-density polyethylene. J Fire Sci 31:73–84. https://doi.org/10.1177/0734904112454835 CrossRef

53.

Zhong H, Lukes JR (2006) Interfacial thermal resistance between carbon nanotubes: molecular dynamics simulations and analytical thermal modeling. Phys Rev B Condens Matter 74:125403–125412. https://doi.org/10.1103/PhysRevB.74.125403 CrossRef

54.

Kim H, Abdala AA, Macosko CW (2010) Graphene/polymer nanocomposites. Macromolecules 43:6515–6530. https://doi.org/10.1021/ma100572e CrossRef

55.

Yang ZJ, Liu J, Liao RJ, Yang GW, Wu XH, Tang ZH, Guo BC, Zhang LQ, Ma Y, Nie QH, Wang F (2016) Rational design of covalent interfaces for graphene/elastomer nanocomposites. Compos Sci Technol 132:68–75. https://doi.org/10.1016/j.compscitech.2016.06.015 CrossRef

56.

Shenogin S, Bodapati A, Xue L, Ozisik R, Keblinski P (2004) Effect of chemical functionalization on thermal transport of carbon nanotube composites. Appl Phys Lett 85:2229–2231. https://doi.org/10.1063/1.1794370 CrossRef

57.

Tributsch H, Fiechter S (2008) The material strategy of fire-resistant tree barks. In: De Wilde WP, Brebbia CA (eds) High performance structures and materials IV. WIT Press, Ashurst, pp 43–52

Titel: Reduced fire hazards of expandable polystyrene building materials via intumescent flame-retardant coatings
verfasst von: Xiaoming Shao
Yuqian Du
Xingfu Zheng
Jingchao Wang
Yuchao Wang
Shuai Zhao
Zhenxiang Xin
Lin Li
Publikationsdatum: 14.03.2020
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 17/2020
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-020-04548-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 17/2020

Dislocation-controlled microscopic mechanical phenomena in single crystal silicon under bending stress at room temperature

Characterization of amino-crosslinked hypromellose and its adsorption characteristics for methyl orange from water

Thermally activated structural transformations in manganese oxide nanoparticles under air and argon atmospheres

Correction to: Maturation process of natural resins recorded in their thermal properties

Imidazole-loaded microcapsules as latent curing agent with superior solvent stability and shelf life

Emerging energy and environmental application of graphene and their composites: a review

Premium Partner

Marktübersichten