nach oben

Journal of Materials Science

Erschienen in:

15.09.2021 | Polymers & biopolymers

Cellulose film with air barrier and moisture-conducting character fabricated by NMMO

verfasst von: Junwu Peng, Yanan Li, Xinglin Liu, Guizhen Ke, Dengpeng Song, Shuangquan Wu, Weilin Xu, Kunkun Zhu

Erschienen in: Journal of Materials Science | Ausgabe 32/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The use of natural polymer to prepare degradable films is a sustainable production concept that can improve resource utilization and reduce the environmental pollution caused by traditional packaging waste or another field. Here, a regenerated cellulose film was prepared through the N-methylmorpholine-N-oxide (NMMO) cellulose system. The most important advantage of the developed film is that it has air barrier and moisture conduction character, because the surface of films is dense and does not allow small molecules like oxygen to pass through, but water molecules can move freely in the film by means of hydrogen bonds. This shows that the cellulose film has applications in textiles, food preservation, medicine and other fields. Significantly, the film has good tensile strength (maximum strength reaches 149.5 MPa) and light transmittance (more than 80% at 600 nm). Moreover, the effect of coagulation bath concentration, temperature and the content of glycerin on film strength was discussed.

Vorheriger Artikel Size and shape effects on the strength of platinum nanoparticles

Nächster Artikel Saturated and unsaturated aliphatic side chain-appended naphthalenediimide derivatives: synthesis and structure property relationship

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Raghuwanshi VS, Garnier G (2019) Cellulose nano-films as bio-interfaces. Front Chem 7:535. https://doi.org/10.3389/fchem.2019.00535CrossRef

Alexandridis P, Ghasemi M, Furlani EP, Tsianou M (2018) Solvent processing of cellulose for effective bioresource utilization. Curr Opin Green Sustain Chem 14:40–52. https://doi.org/10.1016/j.cogsc.2018.05.008CrossRef

Rabideau BD, Ismail AE (2015) Effect of water content in N-methylmorpholine N-oxide/cellulose solutions on thermodynamics, structure, and hydrogen bonding. J Phys Chem B 119(48):15014–15022. https://doi.org/10.1021/acs.jpcb.5b07500CrossRef

Mao Z, Cao Y, Jie X, Kang G, Zhou M, Yuan Q (2010) Dehydration of isopropanol–water mixtures using a novel cellulose membrane prepared from cellulose/N-methylmorpholine-N-oxide/H₂O solution. Sep Purif Technol 72(1):28–33. https://doi.org/10.1016/j.seppur.2010.01.002CrossRef

Wei Y, Wu K, Liu N, Zhang Y, Wang H (2018) Cellulose acetate fibers with improved mechanical strength prepared with aqueous NMMO as solvent. Cellulose 25(11):6395–404. https://doi.org/10.1007/s10570-018-2032-8CrossRef

Duan J, Liang X, Cao Y, Wang S, Zhang L (2015) High strength chitosan hydrogels with biocompatibility via new avenue based on constructing nanofibrous architecture. Macromolecules 48(8):2706. https://doi.org/10.1021/acs.macromol.5b00117CrossRef

Trygg J, Fardim P (2011) Enhancement of cellulose dissolution in water-based solvent via ethanol–hydrochloric acid pretreatment. Cellulose 18(4):987–94. https://doi.org/10.1007/s10570-011-9550-yCrossRef

Fukaya Y, Hayashi K, Wada M (2008) Cellulose dissolution with polar ionic liquids under mild conditions: required factors for anions. Green Chem 10(1):44–6. https://doi.org/10.1039/B713289ACrossRef

Ahmed ASS, Alloin F, Dufresne A (2005) Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules 6(2):612–26. https://doi.org/10.1021/bm0493685CrossRef

10.

Heinze T, Koschella A (2005) Solvents applied in the field of cellulose chemistry: a mini review. Polímeros 15(2):84–90. https://doi.org/10.1590/S0104-14282005000200005CrossRef

11.

Swatloski RP, Spear SK, Holbrey JD (2002) Dissolution of cellulose [correction of cellose] with ionic liquids. J Am Chem Soc 124(18):4974–5. https://doi.org/10.1021/ja025790mCrossRef

12.

Matsumoto T, Tatsumi D, Tamai N, Takaki T (2001) Solution properties of celluloses from different biological origins in LiCl DMAc. Cellulose 8(4):275–82. https://doi.org/10.1023/A:1015162027350CrossRef

13.

Heinze T, Dicke R, Koschella A, Henning Kull A, Klohr E-A, Koch W (2000) Effective preparation of cellulose derivatives in a new simple cellulose solvent %J macromolecular chemistry and physics. Macromol Chem Phys 201(6):627–31. https://doi.org/10.1002/(SICI)1521-3935(20000301)201:6CrossRef

14.

Xie W, Li T, Tiraferri A et al (2021) Toward the next generation of sustainable membranes from green chemistry principles. ACS Sustain Chem Eng 9(1):50–75. https://doi.org/10.1021/acssuschemeng.0c07119CrossRef

15.

Nunes SP, Zeynep Culfaz-Emecen P, Ramon GZ et al (2020) Thinking the future of membranes: perspectives for advanced and new membrane materials and manufacturing processes. J Membr Sci 598:117761. https://doi.org/10.1016/j.memsci.2019.117761CrossRef

16.

Xu Z, Liao J, Tang H, Efome JE, Li N (2018) Preparation and antifouling property improvement of Tröger’s base polymer ultrafiltration membrane. J Membr Sci 561:59–68. https://doi.org/10.1016/j.memsci.2018.05.042CrossRef

17.

Zhang Y, Tong X, Zhang B, Zhang C, Zhang H, Chen Y (2018) Enhanced permeation and antifouling performance of polyvinyl chloride (PVC) blend Pluronic F127 ultrafiltration membrane by using salt coagulation bath (SCB). J Membr Sci 548:32–41. https://doi.org/10.1016/j.memsci.2017.11.003CrossRef

18.

Qi Y, Lin S, Lan J, Zhan Y, Guo J, Shang J (2021) Fabrication of super-high transparent cellulose films with multifunctional performances via postmodification strategy. Carbohydr Polym 260:117760. https://doi.org/10.1016/j.carbpol.2021.117760CrossRef

19.

Wan J, Diao H, Yu J, Song G, Zhang J (2021) A biaxially stretched cellulose film prepared from ionic liquid solution. Carbohydr Polym 260:117816. https://doi.org/10.1016/j.carbpol.2021.117816CrossRef

20.

Zhang Y, Tian Z, Fu Y, Wang Z, Qin M, Yuan Z (2020) Responsive and patterned cellulose nanocrystal films modified by N-methylmorpholine-N-oxide. Carbohydr Poly 228:115387. https://doi.org/10.1016/j.carbpol.2019.115387CrossRef

21.

Zhang L, Zhou J, Zhang L (2013) Structure and properties of β-cyclodextrin/cellulose hydrogels prepared in NaOH/urea aqueous solution. Carbohydr Poly 94(1):386–393. https://doi.org/10.1016/j.carbpol.2012.12.077CrossRef

22.

Zheng B, Luo Y, Liao H, Zhang C (2017) Investigation of the crystallinity of suspension plasma sprayed hydroxyapatite coatings. Eur Ceram Soc 37(15):5017–5021. https://doi.org/10.1016/j.jeurceramsoc.2017.07.007CrossRef

23.

Yuping Z, Xiao C (2010) Discussion on crystallinity calculated by the technology of peak separation. Res Explor Lab 29(03):41–43

24.

Sayyed AJ, Deshmukh NA, Pinjari DV (2019) A critical review of manufacturing processes used in regenerated cellulosic fibres: viscose, cellulose acetate, cuprammonium, LiCl/DMAc, ionic liquids, and NMMO based lyocell. Cellulose 26(5):2913–2940. https://doi.org/10.1007/s10570-019-02318-yCrossRef

25.

Cheng LP, Soh Y, Dwan AH, Gryte C (1994) An improved model for mass transfer during the formation of polymeric membranes by the immersion-precipitation process. J Poly Sci Part B: Poly Phys 32:1413–1425. https://doi.org/10.1002/polb.1994.090320813CrossRef

26.

Cheng L-P, Dwan A-H, Gryte CC (1995) Membrane formation by isothermal precipitation in polyamide-formic acid-water systems II. Precipitation dynamics. J Poly Sci Part B: Poly Phys 33(2):223–225. https://doi.org/10.1002/polb.1995.090330207CrossRef

27.

Ilyas A, Gebreyohannes AY, Qian J, Reynaerts D, Kuhn S, Vankelecom IFJ (2021) Micro-patterned membranes prepared via modified phase inversion: effect of modified interface on water fluxes and organic fouling. J Colloid Interface Sci 585:490–504. https://doi.org/10.1016/j.jcis.2020.10.031CrossRef

28.

Reuvers AJ, van den Berg JWA, Smolders CA (1987) Formation of membranes by means of immersion precipitation: Part I. A model to describe mass transfer during immersion precipitation. J Membr Sci 34(1):45–65. https://doi.org/10.1016/S0376-7388(00)80020-4CrossRef

29.

Reuvers AJ, Smolders CA (1987) Formation of membranes by means of immersion precipitation: Part II. the mechanism of formation of membranes prepared from the system cellulose acetate-acetone-water. J Membr Sci 34(1):67–86. https://doi.org/10.1016/S0376-7388(00)80021-6CrossRef

30.

Shahbazi H, Tataei M, Enayati MH, Shafeiey A, Azizi Malekabadi M (2019) Structure-transmittance relationship in transparent ceramics. J Alloy Comp 785:260–285. https://doi.org/10.1016/j.jallcom.2019.01.124CrossRef

31.

Gobrecht A, Bendoula R, Roger J-M, Bellon-Maurel V (2015) Combining linear polarization spectroscopy and the representative layer theory to measure the beer-lambert law absorbance of highly scattering materials. Anal Chim Acta 853:486–494. https://doi.org/10.1016/j.aca.2014.10.014CrossRef

32.

Tang C, Liu H (2008) Cellulose nanofiber reinforced poly(vinyl alcohol) composite film with high visible light transmittance. Compos Part A: Appl Sci Manuf 39(10):1638–1643. https://doi.org/10.1016/j.compositesa.2008.07.005CrossRef

33.

Shandilya M, Thakur S, Thakur S (2020) Magnetic amendment in the fabrication of environment friendly and biodegradable iron oxide/ethyl cellulose nanocomposite membrane via electrospinning. Cellulose 27(17):10007–10017. https://doi.org/10.1007/s10570-020-03455-5CrossRef

34.

Zhang Y (2002) Dong Hua University,

35.

van de Witte P, Dijkstra PJ, van den Berg JWA, Feijen J (1996) Phase separation processes in polymer solutions in relation to membrane formation. J Membr Sci 117(1):1–31. https://doi.org/10.1016/0376-7388(96)00088-9CrossRef

36.

Bang YH, Lee S, Park JB, Cho HH (1999) Effect of coagulation conditions on fine structure of regenerated cellulosic films made from cellulose/N-methylmorpholine-N-oxide/H2O systems. J Appl Polym Sci 73(13):2681–2690. https://doi.org/10.1002/(SICI)1097-4628(19990923)73:13CrossRef

37.

Ichwan M, Son T-W (2012) Preparation and characterization of dense cellulose film for membrane application. J Appl Polym Sci 124(2):1409–1418. https://doi.org/10.1002/app.35104CrossRef

38.

Laity PR, Glover PM, Hay JN (2002) Composition and phase changes observed by magnetic resonance imaging during non-solvent induced coagulation of cellulose. Polymer 43(22):5827–5837. https://doi.org/10.1016/S0032-3861(02)00531-1CrossRef

39.

Lee S, Kim J, Lee C-H (1999) Analysis of CaSO4 scale formation mechanism in various nanofiltration modules. J Membr Sci 163(1):63–74. https://doi.org/10.1016/S0376-7388(99)00156-8CrossRef

40.

Shi S, Zhu K, Chen X, Hu J, Zhang L (2019) Cross-linked cellulose membranes with robust mechanical property, self-adaptive breathability, and excellent biocompatibility. ACS Sustain Chem Eng 7(24):19799–19806. https://doi.org/10.1021/acssuschemeng.9b05092CrossRef

41.

Duan Bo, Chang C, Na Zhang (2014) Structure and properties of films fabricated from chitin solution by coagulating with heating. J Appl Polym Sci. 131(4):1001–1007 https://doi.org/10.1002/app.39538CrossRef

42.

Jianqing W, Li Z (2008) Preparation of cellulose films and mechanical properties by NMMO. J Tianjin Univ SciTechnol 23(04):9–13

43.

Yaopeng Z, HuiliXinyuan SS, Xuechao H (2002) Morphology, permeation and cutoff properties of cellulose membranes prepared by NMMO method. Memb Sci Technol 22(4):13–20

44.

Zheng X, Huang F, Chen L, Huang L, Cao S, Ma X (2019) Preparation of transparent film via cellulose regeneration: correlations between ionic liquid and film properties. Carbohy Poly 203:214–218. https://doi.org/10.1016/j.carbpol.2018.09.060CrossRef

45.

Yan C, Wang R, Wan J et al (2016) Cellulose/microalgae composite films prepared in ionic liquids. Algal Res 20:135–141. https://doi.org/10.1016/j.algal.2016.09.024CrossRef

46.

Pang J, Wu M, Zhang Q et al (2015) Comparison of physical properties of regenerated cellulose films fabricated with different cellulose feedstocks in ionic liquid. Carbohydr Poly 121:71–78. https://doi.org/10.1016/j.carbpol.2014.11.067CrossRef

47.

Qi H, Cai J, Zhang L, Kuga S (2009) Properties of films composed of cellulose nanowhiskers and a cellulose matrix regenerated from alkali/urea solution. Biomacromolecules 10:1597–1602. https://doi.org/10.1021/bm9001975CrossRef

48.

Wang C, Shi J, He M et al (2018) High strength cellulose/ATT composite films with good oxygen barrier property for sustainable packaging applications. Cellulose 25(7):4145–4154. https://doi.org/10.1007/s10570-018-1855-7CrossRef

49.

Liu Y, Xu S, Jing M, Wei Y, Deng H, Fu Q (2019) Preparation of high-performance cellulose composite membranes from LiOH/urea solvent system. Nanocomposites 5(2):49–60. https://doi.org/10.1080/20550324.2019.1619962CrossRef

50.

Khare VP, Greenberg AR, Kelley SS, Pilath H, Juhn Roh I, Tyber J (2007) Synthesis and characterization of dense and porous cellulose films. J Appl Polym Sci. 105(3):1228–1236. https://doi.org/10.1002/app.25888CrossRef

51.

Kim C-J, Khan W, Kim D-H, Cho K-S, Park S-Y (2011) Graphene oxide/cellulose composite using NMMO monohydrate. Carbohydr Polym 86(2):903–909. https://doi.org/10.1016/j.carbpol.2011.05.041CrossRef

52.

Niu X, Huan S, Li H, Pan H, Rojas OJ (2021) Transparent films by ionic liquid welding of cellulose nanofibers and polylactide: enhanced biodegradability in marine environments. J Hazard Mater 402:124073. https://doi.org/10.1016/j.jhazmat.2020.124073CrossRef

53.

Wang Y, Yuan L, Tian H, Zhang L, Lu A (2019) Strong, transparent cellulose film as gas barrier constructed via water evaporation induced dense packing. J Membr Sci 585:99–108. https://doi.org/10.1016/j.memsci.2019.04.059CrossRef

54.

Li R, Zhang L, Xu M (2012) Novel regenerated cellulose films prepared by coagulating with water: structure and properties. Carbohydr Polym 87(1):95–100. https://doi.org/10.1016/j.carbpol.2011.07.023CrossRef

55.

Zhu K, Shi S, Cao Y, Lu A, Hu J, Zhang L (2019) Robust chitin films with good biocompatibility and breathable properties. Carbohydr Polym 212:361–367. https://doi.org/10.1016/j.carbpol.2019.02.054CrossRef

56.

Yue Y, Gong X, Jiao W et al (2021) In-situ electrospinning of thymol-loaded polyurethane fibrous membranes for waterproof, breathable, and antibacterial wound dressing application. J Colloid Interface Sci 592:310–318. https://doi.org/10.1016/j.jcis.2021.02.048CrossRef

57.

Patil PP, Reagan MR, Bohara RA (2020) Silk fibroin and silk-based biomaterial derivatives for ideal wound dressings. Int J Biol Macromol 164:4613. https://doi.org/10.1016/j.ijbiomac.2020.08.041CrossRef

58.

Hu J, Mondal S (2006) In: Mattila HR (ed) Intelligent Textiles and ClothingWoodhead Publishing, 9 - Study of shape memory polymer films for breathable textiles, 143–164, https://doi.org/10.1533/9781845691622.2.143.CrossRef

59.

Tehrani-Bagha AR (2019) Waterproof breathable layers – A review. Adv Colloid Interface Sci 268:114–135. https://doi.org/10.1016/j.cis.2019.03.006CrossRef

60.

Zhou Z, Ma J, Li K et al (2021) A plant leaf-mimetic membrane with controllable gas permeation for efficient preservation of perishable products. ACS Nano 15(5):8742-8752. https://doi.org/10.1021/acsnano.1c00997CrossRef

Titel: Cellulose film with air barrier and moisture-conducting character fabricated by NMMO
verfasst von: Junwu Peng
Yanan Li
Xinglin Liu
Guizhen Ke
Dengpeng Song
Shuangquan Wu
Weilin Xu
Kunkun Zhu
Publikationsdatum: 15.09.2021
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 32/2021
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-021-06499-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 32/2021

A facile patterning preparation of barnacle-like polypyrrole on sandpaper for flexible electronics

Determination of the elastic modulus of adherent cells using spherical atomic force microscope probe

Influence of material and process parameters on microstructure evolution during the fabrication of carbon–carbon composites: a review

Comparison of the electrochemical performance of self-cross-linked and free-standing polyaniline electrodes

A fluorescent probe based on visible light-emitting functionalized Graphene Quantum dots for the sensitive and selective detection of Pb (II) ions

Size and shape effects on the strength of platinum nanoparticles

Premium Partner

Marktübersichten