Anzeige
Erschienen in:
01.06.2014
Fabrication of conductive copper-coated glass fibers through electroless plating process
Erschienen in: Journal of Materials Science: Materials in Electronics | Ausgabe 6/2014
EinloggenAktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Abstract
A simple electroless copper plating process was employed to prepare copper-coated glass fibers with excellent conductivity. The glass fibers were pretreated by etching, sensitizing, and activating procedures. Disodium ethylenediamine tetra acetate (EDTA-2Na) and hydrazine hydrate (N2H4·H2O) were employed as complex reagent and reductant, respectively. It was found that the copper deposition was greatly influenced by dosage of EDTA-2Na, concentration of sodium hydroxide (NaOH), temperature, and volume of N2H4·H2O. The optimal temperature for electroless copper plating ranged from 40 to 60 °C. The composites were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy techniques. The result showed that the minimum volume resistivity of 0.0010 Ω cm was obtained for the sample with perfect copper coatings on the surface of glass fibers. This method is simple, low-cost, and large production, and can be extended to fabricate other metal-coated glass fibers with distinct conductivity.