Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
Journal of Sol-Gel Science and Technology
Erschienen in: Journal of Sol-Gel Science and Technology 3/2015

01.09.2015 | Review Paper

Mechanical properties of sol–gel coatings on polycarbonate: a review

verfasst von: Nicolas Le Bail, Stéphane Benayoun, Bérangère Toury

Erschienen in: Journal of Sol-Gel Science and Technology | Ausgabe 3/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Organic/inorganic hybrid coatings prepared via the sol–gel process have received lot of interests during the early twenty-first century. Devices obtained thanks to this low-temperature route display a large panel of bulk and surface properties that can be modulated according to the target. Moreover, this versatility enables to offer solutions in various domains and industrial applications such as microelectronics, optic, aeronautic, automotive, health. When the aimed application required polymer as substrate, the use of sol–gel process takes its full interest as soft chemistry. This review is dedicated to mechanical properties improvement of a common polymer substrate, e.g., polycarbonate, when a transparent sol–gel coating recovered it.

Graphical Abstract

Vorheriger Artikel Effects of seed layer and crystallization process on crystal orientation and properties of NKBT thin films

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Diepens M, Gijsman P (2007) Photodegradation of bisphenol A polycarbonate. Polym Degrad Stab 92:397–406CrossRef
2.
Fabbri P, Leonelli C, Messori M et al (2008) Improvement of the surface properties of polycarbonate by organic–inorganic hybrid coatings. J Appl Polym Sci 108:1426–1436CrossRef
3.
Xia H, Suo ZY, Qiang GJ, Chang CJ (2008) Synthesis, characterization, and degradation of a novel l-tyrosine-derived polycarbonate for potential biomaterial applications. J Appl Polym Sci 110:2168–2178CrossRef
4.
Karatas S, Hosgor Z, Kayaman-Apohan N, Gungor A (2009) Preparation and characterization of phosphine oxide containing organosilica hybrid coatings by photopolymerization and sol–gel process. Prog Org Coat 65:49–55CrossRef
5.
6.
Fateh R, Dillert R, Bahnemann D (2014) Self-Cleaning properties, mechanical stability, and adhesion strength of transparent photocatalytic TiO2–ZnO coatings on polycarbonate. ACS Appl Mater Interfaces 6:2269–2277CrossRef
7.
Yavas H, Selcuk CDO, Ozhan AES, Durucan C (2014) A parametric study on processing of scratch resistant hybrid sol–gel silica coatings on polycarbonate. Thin Solid Films 556:112–119CrossRef
8.
Chen DG (2001) Anti-reflection (AR) coatings made by sol–gel processes: a review. Sol Energy Mater Sol Cells 68:313–336CrossRef
9.
Wu LYL, Chwa E, Chen Z, Zeng XT (2008) A study towards improving mechanical properties of sol–gel coatings for polycarbonate. Thin Solid Films 516:1056–1062CrossRef
10.
Yahyaei H, Mohseni M (2013) Use of nanoindentation and nanoscratch experiments to reveal the mechanical behavior of sol–gel prepared nanocomposite films on polycarbonate. Tribol Int 57:147–155CrossRef
11.
Sanchez C, Livage J (1990) Sol–gel chemistry from metal alkoxide precursors. New J Chem 14:513–521
12.
Sanchez C, Belleville P, Popall M, Nicole L (2011) Applications of advanced hybrid organic-inorganic nanomaterials: from laboratory to market. Chem Soc Rev 40:696–753CrossRef
13.
Lionti K, Toury B, Boissiere C et al (2013) Hybrid silica coatings on polycarbonate: enhanced properties. J Sol-Gel Sci Technol 65:52–60CrossRef
14.
Chang C-C, Oyang T-Y, Hwang F-H et al (2012) Preparation of polymer/silica hybrid hard coatings with enhanced hydrophobicity on plastic substrates. J Non-Cryst Solids 358:72–76CrossRef
15.
Zhang S, Chen Z, Guo M et al (2014) Waterborne UV-curable polycarbonate polyurethane nanocomposites based on polydimethylsiloxane and colloidal silica with enhanced mechanical and surface properties. RSC Adv 4:30938–30947CrossRef
16.
Han Y-H, Taylor A, Knowles KM (2009) Scratch resistance and adherence of novel organic–inorganic hybrid coatings on metallic and non-metallic substrates. Surf Coat Technol 203:2871–2877CrossRef
17.
Gururaj T, Subasri R, Raju KRCS, Padmanabham G (2011) Effect of plasma pretreatment on adhesion and mechanical properties of UV-curable coatings on plastics. Appl Surf Sci 257:4360–4364CrossRef
18.
Sowntharya L, Lavanya S, Chandra GR et al (2012) Investigations on the mechanical properties of hybrid nanocomposite hard coatings on polycarbonate. Ceram Int 38:4221–4228CrossRef
19.
Li CH, Wilkes GL (1998) The mechanism for 3-aminopropyltriethoxysilane to strengthen the interface of polycarbonate substrates with hybrid organic–inorganic sol–gel coatings. J Inorg Organomet Polym 8:33–45CrossRef
20.
Philipp G, Schmidt H (1986) The reactivity of TiO2 and ZrO2 in organically modified silicates. J Non-Cryst Solids 82:31–36CrossRef
21.
Kiruthika P, Subasri R, Jyothirmayi A et al (2010) Effect of plasma surface treatment on mechanical and corrosion protection properties of UV-curable sol–gel based GPTS-ZrO2 coatings on mild steel. Surf Coat Technol 204:1270–1276CrossRef
22.
Basturk E, Inan T, Gungor A (2013) Flame retardant UV-curable acrylated epoxidized soybean oil based organic–inorganic hybrid coating. Prog Org Coat 76:985–992CrossRef
23.
Altintas Z, Karatas S, Kayaman-Apohan N, Gungor A (2011) The maleimide modified epoxy resins for the preparation of UV-curable hybrid coatings. Polym Adv Technol 22:270–278CrossRef
24.
Wouters MEL, Wolfs DP, van der Linde MC et al (2004) Transparent UV curable antistatic hybrid coatings on polycarbonate prepared by the sol–gel method. Prog Org Coat 51:312–320CrossRef
25.
Belon C, Chemtob A, Croutxe-Barghorn C et al (2011) A simple method for the reinforcement of UV-cured coatings via sol–gel photopolymerization. Macromol Mater Eng 296:506–516CrossRef
26.
Buckle H (1971) Use the hardness test to determine other material properties. In: Westbrook JH, Conrad ASM (eds) Science of hardness testing and its research applications, vol 27. Metals Park, Ohio, pp 453–491
27.
Iost A, Bigot R (1996) Hardness of coatings. Surf Coat Technol 80:117–120CrossRef
28.
Landel RF, Nielsen LE (1993) Mechanical properties of polymers and composites, 2nd edn. CRC Press, Boca Raton
29.
Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583CrossRef
30.
Doerner MF, Nix WD (1986) A method for interpreting the data from depth-sensing indentation instruments. J Mater Res 1:601–609CrossRef
31.
VanLandingham MR, Villarrubia JS, Guthrie WF, Meyers GF (2001) Nanoindentation of polymers: an overview. Macromol Symp 167:15–43CrossRef
32.
Martens A (1898) Handbuch der materialienkunde für den maschinenbau: Materialprüfungswesen, probirmaschinen und messinstrumente. Springer, Berlin
33.
Pethicai JB, Hutchings R, Oliver WC (1983) Hardness measurement at penetration depths as small as 20 nm. Philos Mag A 48:593–606CrossRef
34.
Loubet J, Georges J, Marchesini O, Meille G (1984) Vickers indentation curves of magnesium-oxide (Mgo). J Tribol Trans ASME 106:43–48CrossRef
35.
Bec S, Tonck A, Loubet JL (2006) A simple guide to determine elastic properties of films on substrate from nanoindentation experiments. Philos Mag 86:5347–5358CrossRef
36.
Han SM, Saha R, Nix WD (2006) Determining hardness of thin films in elastically mismatched film-on-substrate systems using nanoindentation. Acta Mater 54:1571–1581CrossRef
37.
Li XD, Bhushan B (2002) A review of nanoindentation continuous stiffness measurement technique and its applications. Mater Charact 48:11–36CrossRef
38.
Bull SJ (1997) Failure mode maps in the thin film scratch adhesion test. Tribol Int 30:491–498CrossRef
39.
Hedenqvist P, Hogmark S (1997) Experiences from scratch testing of tribological PVD coatings. Tribol Int 30:507–516CrossRef
40.
Benayoun S, Fouilland-Paille L, Hantzpergue JJ (1999) Microscratch test studies of thin silica films on stainless steel substrates. Thin Solid Films 352:156–166CrossRef
41.
Archard J (1953) Contact and rubbing of flat surfaces. J Appl Phys 24:981–988CrossRef
42.
Magnee A (1993) Modelization of damage by abrasion. Wear 162:848–855CrossRef
43.
Bull SJ (1999) Can scratch testing be used as a model for the abrasive wear of hard coatings? Wear 233:412–423CrossRef
44.
Kato K (1995) Microwear mechanisms of coatings. Surf Coat Technol 76–77:469–474CrossRef
45.
Leyland A, Matthews A (2000) On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour. Wear 246:1–11CrossRef
46.
Musil J, Kunc F, Zeman H, Polakova H (2002) Relationships between hardness, Young’s modulus and elastic recovery in hard nanocomposite coatings. Surf Coat Technol 154:304–313CrossRef
47.
Tsui TY, Pharr GM, Oliver WC et al (1995) Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks. In: Symposium I—Mechanical Behavior of Diamond and Forms of Carbon
48.
Pharr GM (1998) Measurement of mechanical properties by ultra-low load indentation. Mater Sci Eng, A 253:151–159CrossRef
49.
Tsui TY, Pharr GM (1999) Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates. J Mater Res 14:292–301CrossRef
50.
Lionti K, Cui L, Volksen W et al (2013) Independent control of adhesive and bulk properties of hybrid silica coatings on polycarbonate. ACS Appl Mater Interfaces 5:11276–11280CrossRef
51.
Cui L, Ranade AN, Matos MA et al (2012) Atmospheric plasma deposited dense silica coatings on plastics. ACS Appl Mater Interfaces 4:6587–6598CrossRef
52.
Le Houérou V, Gauthier C, Schirrer R (2010) Mechanical analysis of the blistering of a thin film deposited on a glassy polymer. Tribol Int 43:129–135CrossRef
53.
Mizuta Y, Daiko Y, Mineshige A et al (2011) Phase-separation and distribution of phenyl groups for PhTES-TEOS coatings prepared on polycarbonate substrate. J Sol-Gel Sci Technol 58:80–84CrossRef
54.
Lee CH, Lee SG, Lee JD (2012) Preparation and characterization of photochromic organic–inorganic hybrid coating using 1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)3,3,4,4,5,5-hexafluoro-1-cyclope ntene. Polym Korea 36:16–21CrossRef
55.
Trabelsi O, Tighzert L, Jbara O, Hadjadj A (2011) Synthesis via sol–gel process and characterization of novel organic–inorganic coatings. J Non-Cryst Solids 357:3910–3916CrossRef
56.
57.
Mulazim Y, Kahraman MV, Apohan NK et al (2011) Preparation and characterization of UV-curable, boron-containing, transparent hybrid coatings. J Appl Polym Sci 120:2112–2121CrossRef
58.
Kahraman MV, Bayramoglu G, Boztoprak Y et al (2009) Synthesis of fluorinated/methacrylated epoxy based oligomers and investigation of its performance in the UV curable hybrid coatings. Prog Org Coat 66:52–58CrossRef
59.
Gilberts J, Tinnemans AHA, Hogerheide MP, Koster TPM (1998) UV curable hard transparent hybrid coating materials on polycarbonate prepared by the sol–gel method. J Sol-Gel Sci Technol 11:153–159CrossRef
60.
Shin YJ, Yang DH, Oh MH et al (2009) Hard coatings on polycarbonate plate by sol–gel reactions of melamine derivative, poly(vinyl alcohol), and silicates. J Ind Eng Chem 15:238–242CrossRef
61.
Chen Z, Wu LYL, Chwa E, Tham O (2008) Scratch resistance of brittle thin films on compliant substrates. Mater Sci Eng, A 493:292–298CrossRef
62.
Sowntharya L, Gundakaram RC, Raju K, Subasri R (2013) Effect of addition of surface modified nanosilica into silica-zirconia hybrid sol–gel matrix. Ceram Int 39:4245–4252CrossRef
63.
Dinelli M, Fabbri E, Bondioli F (2011) TiO2–SiO2 hard coating on polycarbonate substrate by microwave assisted sol–gel technique. J Sol-Gel Sci Technol 58:463–469CrossRef
64.
Hwang DK, Moon JH, Shul YG et al (2003) Scratch resistant and transparent UV-protective coating on polycarbonate. J Sol-Gel Sci Technol 26:783–787CrossRef
65.
Del Angel-Lopez D, Dominguez-Crespo MA, Torres-Huerta AM et al (2013) Analysis of degradation process during the incorporation of ZrO2: SiO2 ceramic nanostructures into polyurethane coatings for the corrosion protection of carbon steel. J Mater Sci 48:1067–1084CrossRef
66.
Le Bail N, Lionti K, Benayoun S et al (2015) Scratch resistant sol–gel coatings on pristine polycarbonate. New J Chem (accepted manuscript)
67.
Innocenzi P, Esposto M, Maddalena A (2001) Mechanical properties of 3-glycidoxypropyltrimethoxysilane based hybrid organic-inorganic materials. J Sol-Gel Sci Technol 20:293–301CrossRef
68.
Blanc D, Last A, Franc J et al (2006) Hard UV-curable organo-mineral coatings for optical applications. Thin Solid Films 515:942–946CrossRef
69.
Kessman AJ, Huckaby DKP, Snyder CR et al (2009) Tribology of water and oil repellent sol–gel coatings for optical applications. Wear 267:614–618CrossRef
70.
Robertson MA, Rudkin RA, Parsonage D, Atkinson A (2003) Mechanical and thermal properties of organic/inorganic hybrid coatings. J Sol-Gel Sci Technol 26:291–295CrossRef
71.
Hu L, Zhang X, Sun Y, Williams RJJ (2005) Hardness and elastic modulus profiles of hybrid coatings. J Sol-Gel Sci Technol 34:41–46CrossRef
72.
Fabbri P, Messori M, Toselli M et al (2008) Enhancing the scratch resistance of polycarbonate with poly(ethylene oxide)-silica hybrid coatings. Adv Polym Technol 27:117–126CrossRef
73.
Raju KRCS, Sowntharya L, Lavanya S, Subasri R (2012) Effect of plasma pretreatment on adhesion and mechanical properties of sol–gel nanocomposite coatings on polycarbonate. Compos Interfaces 19:259–270CrossRef
74.
Li CH, Jordens K, Wilkes GL (2000) Abrasion-resistant coatings for plastic and soft metallic substrates by sol–gel reactions of a triethoxysilylated diethylenetriamine and tetramethoxysilane. Wear 242:152–159CrossRef
75.
Oktay B, Kayaman-Apohan N (2013) Maleimide containing UV-cured hybrid coatings. Adv Polym Technol 32:21341CrossRef
76.
Tsukakoshi S, Itatani K, Koda S (2011) Properties of silicious film on polycarbonate substrate prepared by vacuum ultraviolet irradiation: effect of intermediate silane layer. J Eur Ceram Soc 31:2489–2496CrossRef
77.
Han Y-H, Taylor A, Mantle MD, Knowles KM (2007) UV curing of organic–inorganic hybrid coating materials. J Sol-Gel Sci Technol 43:111–123CrossRef
Metadaten
Titel
Mechanical properties of sol–gel coatings on polycarbonate: a review
verfasst von
Nicolas Le Bail
Stéphane Benayoun
Bérangère Toury
Publikationsdatum
01.09.2015
Verlag
Springer US
Erschienen in
Journal of Sol-Gel Science and Technology / Ausgabe 3/2015
Print ISSN: 0928-0707
Elektronische ISSN: 1573-4846
DOI
https://doi.org/10.1007/s10971-015-3781-6

Weitere Artikel der Ausgabe 3/2015

Journal of Sol-Gel Science and Technology 3/2015 Zur Ausgabe

Original Paper

Effects of residual stress on the electrical properties in PbZr0.52Ti0.48O3 thin films

Original Paper

Sol–gel synthesis and characterization of the delafossite CuAlO2

Original Paper

Synthesis and characterizations of large surface tungsten oxide nanoparticles as a novel counter electrode for dye-sensitized solar cell

Original Paper

Applications of inorganic–organic mesoporous materials constructed by self-assembly processes for removal of benzo[k]fluoranthene and benzo[b]fluoranthene

Original Paper

Preparation and light-controlled resistive switching memory behavior of CuCr2O4

Original Paper

Synthesis of Zn2+-doped MgO nanoparticles using substituted brucite precursors and studies on their optical properties

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise