nach oben

Metal Science and Heat Treatment

Erschienen in:

13.11.2017

Transformations of Supercooled Austenite in a Promising High-Strength Steel Grade Under Continuous Cooling Conditions

verfasst von: M. V. Maisuradze, M. A. Ryzhkov, Yu. V. Yudin, A. A. Kuklina

Erschienen in: Metal Science and Heat Treatment | Ausgabe 7-8/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Special features of the transformations of supercooled austenite occurring under continuous cooling of a promising high-strength steel grade not standardized in the Russian Federation are determined. A method for evaluating the volume fractions of structure constituents formed in the steel as a result of cooling from 925°C at various constant rates within 0.025 – 75 K/sec is proposed and tested. The results are generalized in the form of a thermokinetic diagram of transformations of supercooled austenite.

Vorheriger Artikel Martensitic Transformation in Low-Carbon Steels

Nächster Artikel Effect of Homogenizing Heat Treatment of Liquid Aluminum–Copper Alloys on the Structure of Rapidly Crystallized Specimens

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

V. M. Farber, O. V. Selivanova, A. B. Arabey, et al., “Effect of heat treatment on mechanical properties of steels of strength class K65 (X80),” Met. Sci. Heat Treat., 56, 454 – 456 (2014); DOI https://doi.org/10.1007/s11041-014-9781-2.CrossRef

A. A. Popov, A. G. Illarionov, S. I. Stepanov, et al., “Effect of quenching temperature on structure and properties of titanium alloy: Structure and phase composition,” Phys. Met. Metallogr., 115, 507 – 516 (2014); DOI https://doi.org/10.1134/S0031918X14050068.CrossRef

A. Kumar, A. Sharma, and S. K. Goel, “Effect of heat treatment on microstructure, mechanical properties and erosion resistance of cast 23-8-N nitronic steel,” Mater. Sci. Eng. A, 637, 56 – 62 (2015); DOI https://doi.org/10.1016/j.msea.2015.04.031.CrossRef

M. V. Maisuradze, M. A. Ryzhkov, Yu. V. Yudin, et al., “Heat treatment technology for high-strength engineering steel variable cross-section components,” Metallurgist, 58, 712 – 716 (2014); DOI https://doi.org/10.1007/s11015-014-9982-3.CrossRef

M. A. Ryzhkov, I. N. Veselov, I. Yu. Pyshmintsev, et al., “Pilot production of casing tubes from 20Kh1MFA steel resistant to media containing hydrogen sulfide,” Metallurgist, 52, 238 – 243 (2008); DOI https://doi.org/10.1007/s11015-008-9039-6.CrossRef

I. N. Ashikhmina, A. I. Stepanov, S. V. Belikov, et al., “Optimizing the heat treatment of steel of 20X1MFA type,” Steel in Transl., 38, 407 – 410 (2008); DOI: https://doi.org/10.3103/s096709120805015X.CrossRef

J. Hu, W. Cao, C. Wang, et al., “Phase transformation behavior of cold rolled 0.1C – 5Mn steel during heating process studied by differential scanning calorimetry,” Mater. Sci. Eng. A, 636, 108 – 116 (2015); DOI https://doi.org/10.1016/j.msea.2015.03.080.CrossRef

K. N. Vdovin, K. G. Pivovarova, and M. A. Lisovskaya, “The use of thermal analysis to study the structure and properties of roll steels,” Met. Sci. Heat Treat., 56, 302 – 305 (2014); DOI: https://doi.org/10.1007/s11041-014-9750-9.CrossRef

F. Hahnenberger, M. Smaga, and D. Eifler, “Microstructural investigation of the fatigue behavior and phase transformation in metastable austenitic steels at ambient and lower temperatures,” Int. J. Fatigue, 69, 36 – 48 (2014); DOI: https://doi.org/10.1016/j.ijfatigue.2012.07.004.CrossRef

10.

M. A. Ryzhkov and A. A. Popov, “Methodological aspects of plotting thermokinetic diagrams of transformation of supercooled austenite in low-alloy steels,” Met. Sci. Heat Treat., 52, 612 – 616 (2011); DOI: https://doi.org/10.1007/s11041-011-9329-7.

11.

A. N. Makovetskii, T. I. Tabachnikova, I. L. Yakovleva, et al., “Dilatometry investigation of austenite dissociation for low-alloyed pipe steel on cooling from intercritical temperature range,” Phys. Met. Metallogr., 113, 982 – 991 (2012); DOI: https://doi.org/10.1134/s0031918X12100067.CrossRef

12.

S. H. M. Azghandi, V. G. Ahmadabadi, I. Raoofian, et al., “Investigation on decomposition behavior of austenite under continuous cooling in vanadium microalloyed steel (30MSV6),” Mater. Des., 88, 751 – 758 (2015); DOI: https://doi.org/10.1016/j.matdes.2015.09.046.CrossRef

13.

T. A. Kop, J. Sietsma, and S. Van Der Zwaag, “Dilatometric analysis of phase transformations in hypo-eutectoid steels,” J. Mater. Sci., 36, 519 – 526 (2001); DOI: https://doi.org/10.1023/A:1004805402404.CrossRef

14.

M. V. Maisuradze, Yu. V. Yudin, and M. A. Ryzhkov, “Numerical simulation of pearlitic transformation in steel 45Kh5MF,” Met. Sci. Heat Treat., 56, 512 – 516 (2015); DOI: https://doi.org/10.1007/s11041-015-9791-8.CrossRef

15.

P. V. Romanov and V. P. Radchenko, “Transformation of austenite during continuous cooling of steel,” in: Atlas of Thermokinetic Diagrams, Part I [in Russian], Sib. Otd. AN SSSR, Novosibirsk (1960), 51 p.

16.

L. E. Popova and A. A. Popov, Diagrams of Austenite Transformation in Steels and Beta-Solution in Titanium Alloys [in Russian], Metallurgiya, Moscow (1991), 503 p.

17.

K. Abbaszadeh, H. Sagha, and Sh. Kheirandish, “Effect of bainite morphology on mechanical properties of the mixed bainitemartensite microstructure in D6AC steel,” J. Mater. Sci. Technol., 28(4), 336 – 342 (2012); DOI: https://doi.org/10.1016/s1005-0302(12)60065-6.CrossRef

18.

L. M. Utevskii, Electron Diffraction Microscopy in Metallography [in Russian], Metallurgiya, Moscow (2001), 672 p.

19.

A. S. Zubchenko, Index of Steels and Alloys [in Russian], Mashinostroenie, Moscow (2001).

20.

C. R. N. Nunura, C. A. dos Santos, and J. A. Spim, “Numerical–experimental correlation of microstructures, cooling rates and mechanical properties of AISI 1045 steel during the Jominy end-quench test,” Mater. Des., 76, 230 – 244 (2015); DOI: https://doi.org/10.1016/j.matdes.2015.03.031.CrossRef

21.

G. E. Totten, Steel Heat Treatment, Metallurgy and Technologies, CRC Press, Boca Raton (2007), 834 p.

22.

L. Huiping, Z. Guoqun, N. Shanting, et al., “FEM simulation of quenching process and experimental verification of simulation result,” Mater. Sci. Eng. A, 452 – 453, 705 – 714 (2007); DOI: https://doi.org/10.1016/j.msea.2006.11.023.CrossRef

23.

J. C. Ion, K. E. Easterling, and M. F. Ashby, “Second report on diagrams of microstructure and hardness for heat-affected zones in welds,” Acta Metall., 32(11), 1949 – 1962 (1984).CrossRef

24.

M. A. Ryzhkov, M. V. Maisuradze, Yu. V. Yudin, et al., “Experience in improving silicon steel component heat treatment quality,” Metallurgist, 59, 401 – 405 (2015); DOI: https://doi.org/10.1007/s11015-015-0117-2.CrossRef

Titel: Transformations of Supercooled Austenite in a Promising High-Strength Steel Grade Under Continuous Cooling Conditions
verfasst von: M. V. Maisuradze
M. A. Ryzhkov
Yu. V. Yudin
A. A. Kuklina
Publikationsdatum: 13.11.2017
Verlag: Springer US
Erschienen in: Metal Science and Heat Treatment / Ausgabe 7-8/2017
Print ISSN: 0026-0673
Elektronische ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-017-0176-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2017

Effect of the Fractional Composition of Filler Powder and Parameters of Laser Coaxial Surfacing on Formation of Beads

Effect of Zircon Particle Size on Age Hardening Behavior of A356 Alloy Based Composites

Effect of REE on the Phase Composition and Properties of a New Refractory Magnesium Alloy of the Mg – Zn – Zr – REE System

Effect of Neodymium and Zirconium on the Structure of Castable Magnesium Alloy ML10 (NZ30K)

Softening and Hardening of Alloys of the Al – Zn System Under Plastic Deformation

A Study of the Structure of Steel – Titanium Joints Formed by Diffusion Welding with the Use of Ultrafine Nickel Powder

Premium Partner

Marktübersichten