Mg(OH)₂ Films Prepared by Ink-Jet Printing and Their Photocatalytic Activity in CO₂ Reduction and H₂O Conversion

Mg(OH)₂ films on Al substrates were fabricated by ink-jet printing, and they were applied as photocatalysts in solar fuels production (H₂ and CH₃OH) from CO₂ and H₂O conversion. The films were fabricated by means of a deposition of a solution composed of magnesium complex nanoparticles over aluminum foils, which were submitted to a heat treatment to promote the crystallization of Mg(OH)₂. The films were characterized by razing incidence X-ray diffraction (GZXD), Fourier-transform infrared spectroscopy (FTIR), Scanning electronic microscopy, X-ray photoelectron spectroscopy (XPS), and N₂ physisorption by BET method. The Mg(OH)₂ was detected in all the samples synthesized with 1 to 40 layers. According to XPS and FTIR analysis, it was detected the presence of carbonates related to Mg₃O(CO₃)₂ and Al⁰ and Al³⁺ due to the substrate. The highest photocatalytic activity was reached using 30 layers of Mg(OH)₂ for H₂ and CH₃OH generation, which it was 268 and 15 µmol g^− 1h^− 1, respectively. These results were associated to the presence of adequate amounts of MgO and Al₂O₃ that promote an efficient transfer of the photogenerated electrons between them. Furthermore, the formation of porous structures with high surface area and relative high roughness promoted an increase in the mass transport between the gas and liquid phase, which increase the effectiveness of the photocatalysts.