Conformation and Fundamental Properties of Novel Lubricant TA-30 for Near Contact Magnetic Recording

A novel perfluoropolyether (PFPE) lubricant called TA-30 has been developed recently. We investigate the conformation of TA-30 on diamond-like carbon (DLC) thin films, by attempting the direct observation of a lubricant film by atomic force microscopy (AFM) using a fluoride probe. We investigate the fundamental properties of a TA-30 lubricant film, such as its spreading characteristics, and the film thickness dependence of surface energy. Considering these experimental results, we conclude that the conformation of TA-30 is considerably different from that of conventional Z-tetraol2000 whose molecular height is 1.7 nm and which was adsorbed on the DLC surface with the random coil. The TA-30 molecules are adsorbed rigidly to the DLC surface with double layers. The thickness of the first TA-30 layer is ~0.9 nm (similar to diameter of the PFPE backbone) and that of the second layer from the DLC surface is 1.4 nm. Since TA-30 has a lower film thickness than Z-tetraol2000 on the DLC surface, it can have two layers, even if the film thickness is approximately of the order of 1 nm, whereas Z-tetraol2000 does not cover the DLC surface and does not form the complete first layer. In addition, we conduct slider touchdown and takeoff hysteresis tests by using TA-30 and Z-tetraol2000. It is confirmed that the use of TA-30 can improve the head–disk interface (HDI) reliability at low-fly-height conditions.