nach oben

Tribology Letters

Erschienen in:

01.03.2020 | Original Paper

Optimization and Validation of a Load-Controlled Numerical Model for Single Asperity Scratch

verfasst von: Kannaki Pondicherry, Dhanraj Rajaraman, Timothy Galle, Stijn Hertelé, Dieter Fauconnier, Patrick De Baets

Erschienen in: Tribology Letters | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Abrasive wear due to particles sliding along a surface (two-body abrasion) or in between two surfaces (three-body abrasion) often leads to early failure of machine components exposed to, e.g., slurry, sand, wear debris, and so on. The primary cause for failure due to abrasive wear is the interaction between abrasive particles and the material surface. Simulation of an entire abrasive system is complicated and involves several challenges. Therefore, a single scratch test is the most fundamental and simplest abstraction of abrasive wear that can be simulated using finite-element modeling (FEM). A novel load-controlled quasi-static explicit three-dimensional (3D) scratch model has been developed using ABAQUS (6.14) for the current study. The FE model was validated using experimentally performed scratch tests on an abrasion-resistant martensitic steel. The influence of load and indenter geometry on scratch geometry was studied in detail. Future work will focus on introducing damage and strain rate dependent material behavior into the model in order to deepen the understanding of the interaction between an abrasive and the material.

Vorheriger Artikel Numerical Simulation of Thermal Fly-Height Control Slider Touchdown Test for Achieving Ideal Subnanometer Clearance Head Slider Touchdown Behaviors

Nächster Artikel Nanowear Mechanisms of Mg Alloyed with Al and Y at Elevated Temperatures

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

International, A.: Annual book of ASTM standards. In: Annual book of ASTM standards. ASTM International, West Conshohocken (2002)

Hokkirigawa, K., Kato, K., Li, Z.Z.: The effect of hardness on the transition of the abrasive wear mechanism of steels. Wear 123(2), 241–251 (1988). https://doi.org/10.1016/0043-1648(88)90102-0 CrossRef

Masen, M.A., de Rooij, M.B., Schipper, D.J., Adachi, K., Kato, K.: Single asperity abrasion of coated nodular cast iron. Tribol. Int. 40(2), 170–179 (2007). https://doi.org/10.1016/j.triboint.2005.11.023 CrossRef

Colaço, R.: An AFM study of single-contact abrasive wear: The Rabinowicz wear equation revisited. Wear 267(11), 1772–1776 (2009). https://doi.org/10.1016/j.wear.2008.12.024 CrossRef

Xu, X., van der Zwaag, S., Xu, W.: A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels. Wear 322–323, 51–60 (2015). https://doi.org/10.1016/j.wear.2014.10.011 CrossRef

Xu, X., van der Zwaag, S., Xu, W.: Prediction of the abrasion resistance of construction steels on the basis of the subsurface deformation layer in a multi-pass dual-indenter scratch test. Wear 338–339, 47–53 (2015). https://doi.org/10.1016/j.wear.2015.05.012 CrossRef

Ben Tkaya, M., Zidi, M., Mezlini, S., Zahouani, H., Kapsa, P.: Influence of the attack angle on the scratch testing of an aluminium alloy by cones: experimental and numerical studies. Mater. Des. 29(1), 98–104 (2008). https://doi.org/10.1016/j.matdes.2006.11.021 CrossRef

Elwasli, F., Zemzemi, F., Mkaddem, A., Mzali, S., Mezlini, S.: A 3D multi-scratch test model for characterizing material removal regimes in 5083-Al alloy. Mater. Des. 87, 352–362 (2015). https://doi.org/10.1016/j.matdes.2015.07.121 CrossRef

Mezlini, S., Tkaya, M.B., Mansori, M.E., Zahouani, H., Kapsa, P.J.T.L.: Correlation between tribological parameters and wear mechanisms of homogeneous and heterogeneous material. Tribol. Lett. 33(2), 153–159 (2009). https://doi.org/10.1007/s11249-008-9403-5 CrossRef

10.

Woldman, M., Van Der Heide, E., Tinga, T., Masen, M.A.: The influence of abrasive body dimensions on single asperity wear. Wear 301(1), 76–81 (2013). https://doi.org/10.1016/j.wear.2012.12.009 CrossRef

11.

Li, J., Beres, W.: Three-dimensional finite element modelling of the scratch test for a TiN coated titanium alloy substrate. Wear 260(11), 1232–1242 (2006). https://doi.org/10.1016/j.wear.2005.08.008 CrossRef

12.

Subhash, G., Zhang, W.: Investigation of the overall friction coefficient in single-pass scratch test. Wear 252(1), 123–134 (2002). https://doi.org/10.1016/S0043-1648(01)00852-3 CrossRef

13.

International, A.: ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials. In West Conshohocken, PA (2016)

14.

Akyuz, F.A., Merwin, J.E.: Solution of nonlinear problems of elastoplasticity by finite elementmethod. AIAA J. 6(10), 1825–1831 (1968). https://doi.org/10.2514/3.4887 CrossRef

15.

Kral, E.R., Komvopoulos, K., Bogy, D.B.: Elastic-plastic finite element analysis of repeated indentation of a half-space by a rigid sphere. J. Appl. Mech. 60(4), 829–841 (1993). https://doi.org/10.1115/1.2900991 CrossRef

16.

Stephens, L.S., Liu, Y., Meletis, E.I.: Finite element analysis of the initial yielding behavior of a hard coating/substrate system with functionally graded interface under indentation and friction. J. Tribol. 122(2), 381–387 (1999). https://doi.org/10.1115/1.555373 CrossRef

17.

Komvopoulos, K.: Elastic-plastic finite element analysis of indented layered media. J. Tribol. 111(3), 430–439 (1989)CrossRef

18.

Tian, H., Saka, N.: Finite element analysis of an elastic-plastic two-layer half-space: normal contact. Wear 148(1), 47–68 (1991). https://doi.org/10.1016/0043-1648(91)90206-A CrossRef

19.

Montmitonnet, P., Edlinger, M., Felder, E.: Finite element analysis of elastoplastic indentation: Part II—Application to hard coatings. J. Tribol 115(1), 15–19 (1993)CrossRef

20.

Djabella, H., Arnell, R.D.: Finite element comparative study of elastic stresses in single, double layer and multilayered coated systems. Thin Solid Films 235(1), 156–162 (1993). https://doi.org/10.1016/0040-6090(93)90259-R CrossRef

21.

Bucaille, J.L., Felder, E., Hochstetter, G.: Mechanical analysis of the scratch test on elastic and perfectly plastic materials with the three-dimensional finite element modeling. Wear 249(5), 422–432 (2001). https://doi.org/10.1016/S0043-1648(01)00538-5 CrossRef

22.

Barge, M., Kermouche, G., Gilles, P., Bergheau, J.M.: Experimental and numerical study of the ploughing part of abrasive wear. Wear 255(1), 30–37 (2003). https://doi.org/10.1016/S0043-1648(03)00159-5 CrossRef

23.

Fang, L., Cen, Q., Sun, K., Liu, W., Zhang, X., Huang, Z.: FEM computation of groove ridge and Monte Carlo simulation in two-body abrasive wear. Wear 258(1), 265–274 (2005). https://doi.org/10.1016/j.wear.2004.09.024 CrossRef

24.

Woldman, M., Van Der Heide, E., Tinga, T., Masen, M.A.: A finite element approach to modeling abrasive wear modes. Tribol Trans 60(4), 711–718 (2017). https://doi.org/10.1080/10402004.2016.1206647 CrossRef

25.

de Borst, R., Crisfield, M.A., Remmers, J.J.C., Verhoosel, C.V.: Nonlinear Finite Element Analysis of Solids and Structures. Wiley, New York (2012)CrossRef

26.

Chapra, S.C., Canale, R.P.: Numerical Methods for Engineers: With Programming and Software Applications, 3rd edn. WCB/McGraw-Hill, Boston (1998)

27.

Abaqus 6.14 User Documentation. Simulia. (2014)

28.

Bhushan, B.: Modern Tribology Handbook. CRC Press, Boca Raton (2001)

29.

Klein, C.A., Cardinale, G.F.: Young's modulus and Poisson's ratio of CVD diamond. Diam. Relat. Mater. 2(5), 918–923 (1993). https://doi.org/10.1016/0925-9635(93)90250-6 CrossRef

30.

Tabor, D.: The hardness of solids. Rev. Phys. Technol. 1(3), 145–179 (1970). https://doi.org/10.1088/0034-6683/1/3/i01 CrossRef

31.

Smith, M.: ABAQUS/Standard User's Mavual, Version 6.14. Simulia, Providence, RI (2014)

32.

Ichimura, H., Ishii, Y.: Effects of indenter radius on the critical load in scratch testing. Surf. Coat. Technol. 165(1), 1–7 (2003). https://doi.org/10.1016/S0257-8972(02)00718-1 CrossRef

33.

Sin, H., Saka, N., Suh, N.P.: Abrasive wear mechanisms and the grit size effect. Wear 55(1), 163–190 (1979). https://doi.org/10.1016/0043-1648(79)90188-1 CrossRef

Titel: Optimization and Validation of a Load-Controlled Numerical Model for Single Asperity Scratch
verfasst von: Kannaki Pondicherry
Dhanraj Rajaraman
Timothy Galle
Stijn Hertelé
Dieter Fauconnier
Patrick De Baets
Publikationsdatum: 01.03.2020
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 1/2020
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-020-1283-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2020

Tribological Behavior of Film Forming Organosilane/-Siloxane Oil Additives: Film Characterization and Influences on Lubrication

Nanowear Mechanisms of Mg Alloyed with Al and Y at Elevated Temperatures

The Relation Between Subsurface Stresses and Useful Wear Life in Sliding Contacts

Interdependence of Amplitude Roughness Parameters on Rough Gaussian Surfaces

Friction–Load Relationship in the Adhesive Regime Revealing Potential Incapability of AFM Investigations

Angular Particle Impact on Metallic Surfaces with Dynamic Refinement SPH

Premium Partner

Marktübersichten