nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.06.2012

Cavitation Erosion Behavior of HPDL-Treated TWAS-Coated Ti6Al4V Alloy and Its Similarity with Water Droplet Erosion

verfasst von: B. S. Mann, Vivek Arya, B. K. Pant

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 6/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Twin wire arc-sprayed (TWAS) coating of commercially available SHS 7170-cored wire was obtained on Ti6AL4V alloy, and to improve its properties, it was further surface treated with high-power diode laser (HPDL). The cavitation erosion (CE) resistance of TWAS-coated samples was evaluated as per ASTM G-32-2003 and it was compared with laser-treated and untreated Ti6Al4V alloys. The CE resistance of TWAS-coated SHS 7170 samples after HPDL treatment has improved significantly. The main reasons for its improvement are elimination of pores, increased fracture toughness, reduced hardness, and brittleness. The CE resistance of HPDL-treated TWAS coating is compared with water droplet erosion resistance. It is observed that there is a similarity in the both the phenomenon.

Vorheriger Artikel A Computational Investigation of the Multi-Hit Ballistic-Protection Performance of Laminated Transparent-armor Systems

Nächster Artikel Resistivity Distribution of Multicrystalline Silicon Ingot Grown by Directional Solidification

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

W.F. Adler, Ed., Erosion: Prevention and Useful Applications, ASTM STP 664, Philadelphia, PA, 1979, 643 pp.

M. Lesser, Thirty Years of Liquid Impact Research: A Tutorial Review, Wear, 1995, 186-187, p 28–34CrossRef

J.E. Field, J.P. Dear, and J.E. Ogren, The Effects of Target Compliance on Liquid Drop Impact, J. Appl. Phys., 1989, 65, p 540–553CrossRef

M.B. Lesser and J.E. Field, The Impact of Compressible Liquids, Annu. Rev. Fluid Mech., 1983, 15, p 97–122CrossRef

J.E. Field, ELSI, Conference: Invited Lecture Liquid Impact: Theory, Experiment, Applications, Wear, 1999, 233-235, p 1–12CrossRef

H.C. Man, Z.D. Cui, T.M. Yue, and F.T. Cheng, Cavitation Erosion Behavior of Laser Gas Nitrided Ti and Ti6Al4V Alloy, Mater. Sci. Eng. A, 2003, 355, p 167–173CrossRef

B.S. Mann, V. Arya, B.K. Pant, and M. Agarwal, High-Power Diode Laser Surface Treatment to Minimize Droplet Erosion of Low-Pressure Steam Turbine Moving Blades, J. Mater. Eng. Perform., 2009, 18(7), p 990–998CrossRef

B.S. Mann, V. Arya, and B.K. Pant, Enhanced Erosion Protection of TWAS Coated Ti6Al4V Alloy Using Boride Bond Coat and Subsequent Laser Treatment, J. Mater. Eng. Perform., 2010. doi:10.1007/s11665-010-9735-9

B.S. Mann, V. Arya, and B.K. Pant, Influence of Laser Power on the Hardening of Ti6Al4V Low Pressure Steam Turbine Blade Material for Enhancing the Water Droplet Erosion Resistance, J. Mater. Eng. Perform., 2011, 20(2), p 213–218CrossRef

10.

L. Gerke, J. Stella, J.C. Schauer, M. Pohl, and J. Winter, Cavitation Erosion Resistance of a-C:H Coatings Produced by PECVD on Stainless Steel and NiTi Substrates, Surf. Coat. Technol., 2010, 204, p 3418–3424CrossRef

11.

C.P. Qin, Y.G. Zheng, and R. Wei, Cavitation Erosion Behavior of Nanocomposite Ti-Si-C-N and Ti/Ti-Si-C-N Coatings Deposited on 2Cr13 Stainless Steel Using a Plasma Enhanced Magnetron Sputtering Process, Surf. Coat. Technol., 2010, 204, p 3530–3538CrossRef

12.

B.K. Pant, V. Arya, and B.S. Mann, Enhanced Droplet Erosion Resistance of Laser Treated Nano Structured TWAS and Plasma Ion-Nitro Carburized Coatings for High Rating Steam Turbine Components, J. Therm. Spray Technol., 2010, 19(5), p 884–892CrossRef

13.

Y.I. Oka and H. Miyata, Erosion Behaviour of Ceramic Bulk and Coating Materials Caused by Water Droplet Impingement, Wear, 2009, 267, p 1804–1810CrossRef

14.

M. Ahmad, M. Casey, and N. Surken, Experimental Assessment of Droplet Impact Erosion Resistance of Steam Turbine Blade Materials, Wear, 2009, 267, p 1605–1618CrossRef

15.

Y.I. Oka, S. Mihara, and H. Miyata, Effective Parameters for Erosion Caused by Water Droplet Impingement and Applications to Surface Treatment Technology, Wear, 2007, 263, p 386–394CrossRef

16.

F.T. Cheng, K.H. Lo, and H.C. Man, NiTi Cladding on Stainless Steel by TIG Surfacing Process Part I. Cavitation Erosion Behavior, Surf. Coat. Technol., 2003, 172, p 308–315CrossRef

17.

F.T. Cheng, K.H. Lo, and H.C. Man, NiTi Cladding on Stainless Steel by TIG Surfacing Process Part II. Corrosion Behavior, Surf. Coat. Technol., 2003, 172, p 316–321CrossRef

18.

K.H. Lo, F.T. Cheng, C. Kwok, and H.C. Man, Improvement of Cavitation Erosion Resistance of AISI, 316 Stainless Steel by Laser Surface Alloying Using Fine WC Power, Surf. Coat. Technol., 2003, 165, p 258–267CrossRef

19.

C.T. Kwok, F.T. Cheng, and H.C. Man, Laser-Fabricated Fe-Ni-Co-Cr-B Austenitic Alloy on Steels. Part I. Microstructures and Cavitation Erosion Behaviour, Surf. Coat. Technol., 2001, 145, p 194–205CrossRef

20.

C.T. Kwok, F.T. Cheng, and H.C. Man, Laser-Fabricated Fe-Ni-Co-Cr-B Austenitic Alloy on Steels. Part II. Corrosion Behaviour and Corrosion-Erosion, Surf. Coat. Technol., 2001, 145, p 206–214CrossRef

21.

R.J. Hand and J.E. Field, Liquid Impact on Toughened Glasses, Eng. Fract. Mech., 1990, 37(2), p 293–311CrossRef

22.

M. Duraiselvam, R. Galun, S. Siegmann, V. Wesling, and B.L. Mordik, Liquid Impact Erosion Characteristics of Martensitic Stainless Steel Laser Clad with Ni-Based Intermetallic Composites and Matrix Composites, Wear, 2006, 261, p 1140–1149CrossRef

23.

J. Steller, International Cavitation Erosion Test and Quantitative Assessment of Material Resistance to Cavitation, Wear, 1999, 233-235, p 51–64CrossRef

24.

W.F. Adler, The Mechanisms of Liquid Impact, Erosion, C.M. Preece, Ed., Academic Press, New York, 1979, p 127–184

25.

J.H. Brunton and M.C. Rochester, Erosion of Solid Surfaces by the Impact of Liquid Drops, Erosion, C.M. Preece, Ed., Academic Press, New York, 1979, p 185–248

26.

F.J. Heymann, On Shock Wave Velocity and Impact Pressure in High Speed Liquid-Solid Impact, Trans. ASME J. Basic Eng., 1968, 90, p 400–402CrossRef

27.

S. Hattori and M. Takinami, Comparison of Cavitation Erosion Rate with Liquid Impingement Erosion Rate, Wear, 2010, 269, p 310–316CrossRef

28.

A. Krella, The Experimental Resistance Parameter for TiN Coating to Cavitation Action, Adv. Mater. Sci., 2010, 10(1), p 4–18

29.

A. Krella, Cavitation Resistance of TiN Nanocrystalline Coatings with Various Thickness, Adv. Mater. Sci., 2009, 9(2), p 12–24

30.

R. Hiking, Transient, High-Pressure Solidification Associated with Cavitation in Water, Phys. Rev. Lett., 1994, 73, p 2853–2856CrossRef

Titel: Cavitation Erosion Behavior of HPDL-Treated TWAS-Coated Ti6Al4V Alloy and Its Similarity with Water Droplet Erosion
verfasst von: B. S. Mann
Vivek Arya
B. K. Pant
Publikationsdatum: 01.06.2012
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 6/2012
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-011-9949-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2012

Molecular-Level Analysis of Shock-Wave Physics and Derivation of the Hugoniot Relations for Fused Silica

Multi-Response Optimization of Friction-Stir-Welded AA1100 Aluminum Alloy Joints

The Kinetics of Phase Transformations During Tempering in Laser Melted High Chromium Cast Steel

Influence of Cell Shape Anisotropy on the Compressive Property of Closed-Cell Al-Si Alloy Foam

Thermal Relaxation of Residual Stresses in Shot Peened Surface Layer of SiCw/Al Composite

Inhibition of Zinc Corrosion by Some Benzaldehyde Derivatives in HCl Solution

Premium Partner

Marktübersichten