nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.11.2012

Parametric Study of Friction Stir Processing of Magnesium-Based AE42 Alloy

verfasst von: H. S. Arora, H. Singh, B. K. Dhindaw

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Friction stir processing (FSP) is one of the severe plastic deformation processes which can significantly affect the material properties. The friction stir processed (FSPed) zone is extremely sensitive to the FSP parameters. The main aim of the current investigation is to analyze the simultaneous influence of the major FSP parameters on the mechanical behavior of a magnesium-based AE42 alloy. In this investigation, Taguchi’s experimental design approach was utilized to determine the optimized set of investigated FSP parameters for processing the AE42 alloy. Hardness of the FSPed specimens was considered as the output response of the experimental design. Cooling temperature during FSP, FSP tool rotational speed, and number of FSP passes were found to be the most influential FSP parameters in the current investigation. A nonlinear regression equation for the output response and the FSP process parameters was also developed using MINITAB 16 software. The developed equation was found to accurately predict the output response of the FSPed AE42 alloy

Vorheriger Artikel Microwave Synthesis of Cadmium and Zinc Tungstates

Nächster Artikel Influence of De-icers on the Corrosion and Fatigue Behavior of 4140 Steel

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

G.V. Raynor, The Physical Metallurgy of Magnesium and its Alloys, Pergamon Press, Amsterdam, 1959, p 254

R.W. Cahn, P. Haasan, and E.J. Kramer, Material Science Technology, Vol 8, VCH-Verlagsgesellschaft, Weinheim, 1996

Z. Liu and W. Gao, Electroless Nickel Plating on AZ91Mg Alloy Substrate, Surf. Coat. Technol., 2006, 200, p 5087–5093CrossRef

P.J. Blau and M. Walukas, Sliding Friction and Wear of Magnesium Alloy AZ91D Produced by Two Different Methods, Tribol. Int., 2000, 33, p 573–579CrossRef

H. Hoche, C. Rosenkranz, A. Delp, M.M. Lohrengel, E. Broszeit, and C. Berger, Investigation of the Macroscopic and Microscopic Electrochemical Corrosion Behaviour of PVD-Coated Magnesium Die Cast Alloy AZ91, Surf. Coat. Technol., 2005, 193(1–3), p 178–184CrossRef

S.K. Wu, S.C. Yen, and T.S. Chou, A Study of r.f.-Sputtered Al and Ni Thin Films on AZ91D Magnesium Alloy, Surf. Coat. Technol., 2006, 200, p 2769–2774CrossRef

S.K. Thakur, B.K. Dhindaw, N. Hort, and K.U. Kainer, Some Studies on the Thermal-Expansion Behavior of C-Fiber, SiCp, and In-Situ Mg₂Si-Reinforced AZ31Mg Alloy-Based Hybrid Composites, Metall. Mater. Trans. A, 2004, 35A, p 1167–1176

S. Ugandhar, M. Gupta, and S.K. Sinha, Enhancing Strength and Ductility of Mg/SiC Composites Using Recrystallization Heat Treatment, Compos. Struct., 2006, 72, p 266–272CrossRef

A. Arunachaleswaran, I.M. Pereira, H. Dieringa, Y. Huang, N. Hort, B.K. Dhindaw, and K.U. Kainer, Creep Behavior of AE42 Based Hybrid Composites, Mater. Sci. Eng., A, 2007, 461, p 268–276CrossRef

10.

D.U. XingHao and W.U. BaoLin, Using Two-Pass Friction Stir Processing to Produce Nanocrystalline Microstructure in AZ61 Magnesium Alloy, Sci China E, 2009, 52(6), p 1751–1755CrossRef

11.

R.S. Mishra and M.W. Mahoney, Friction Stir Processing: A New Grain Refinement Technique to Achieve High Strain Rate Superplasticity in Commercial Alloys, Mater. Sci. Forum, 2001, 357(3), p 507–512CrossRef

12.

R.S. Mishra, M.W. Mahoney, and S.X. McFadden, High Strain Rate Superplasticity in a Friction Stir Processed 7075 Al Alloy, Scripta Mater., 2000, 42, p 163–168

13.

S. Benavides, Y. Li, and L.E. Murr, Ultrafine Grain Structure in the Friction-Stir Welding of Aluminium Alloy 2024 at Low Temperatures, Proceedings of Ultrafined Grained Materials, TMS, 2000, p 155–168

14.

N. Saito, I. Shigematsu, and T. Komaya, Grain Refinement of 1050 Aluminum Alloy by Friction Stir Processing, J. Mater. Sci. Lett., 2001, 20, p 1913–1915CrossRef

15.

Y.J. Kwon, N. Saito, and I. Shigematsu, Friction Stir Process as a New Manufacturing Technique of Ultrafine Grained Aluminum Alloy, J. Mater. Sci. Lett., 2002, 21, p 1473–1476CrossRef

16.

T.A. Freeney and R.S. Mishra, Effect of Friction Stir Processing on Microstructure and Mechanical Properties of a Cast Magnesium Rare Earth Alloy, Metall. Mater. Trans. A, 2010, 41, p 73–84CrossRef

17.

D.R. Ni, D. Wang, A.H. Feng, G. Yao, and Z.Y. Ma, Enhancing the High-Cycle Fatigue Strength of Mg-9Al-1Zn Casting by Friction Stir Processing, Scripta Mater., 2009, 61, p 568–571CrossRef

18.

P. Cavaliere and P.P. DeMarco, Superplastic Behaviour of Friction Stir Processed AZ91 Magnesium Alloy Produced by High Pressure Die Cast, J. Mater. Process. Technol., 2007, 184, p 77–83CrossRef

19.

W. Yuan, R.S. Mishra, B. Carlson, R.K. Mishra, R. Verma, and R. Kubic, Effect of Texture on the Mechanical Behavior of Ultrafine Grained Magnesium Alloy, Scripta Mater., 2011, 64, p 580–583CrossRef

20.

R.S. Mishra and M.W. Mahoney, Friction Stir Welding and Processing, ASM International, Materials Park, 2007

21.

Y.C. Chen, H. Liu, and J. Feng, Friction Stir Welding Characteristics of Different Heat-Treated-State 2219 Aluminium Alloy Plates, Mater. Sci. Eng., A, 2006, 420(1–2), p 21–25

22.

K. Elangovan, V. Balasubramanian, and M. Valliappan, Influences of Tool Pin Profile and Axial Force on the Formation of Friction Stir Processing Zone in AA6061 Aluminium Alloy, Int. J. Adv. Manuf. Technol., 2008, 38, p 285–295CrossRef

23.

L. Karthikeyan, V.S. Senthilkumar, and K.A. Padmanabhan, On the Role of Process Variables in the Friction Stir Processing of Cast Aluminum A319 Alloy, Mater. Des., 2010, 31, p 761–771CrossRef

24.

C.F. Chen, P.W. Kao, L.W. Chang, and N.J. Ho, Effect of Processing Parameters on Microstructure and Mechanical Properties of an Al-Al₁₁Ce₃-Al₂O₃ In-Situ Composite Produced by Friction Stir Processing, Metall. Mater. Trans. A, 2010, 41a, p 513–522CrossRef

25.

P. Cavaliere, A. Squillace, and F. Panella, Effect of Welding Parameters on Mechanical and Microstructural Properties of AA6082 Joints Produced by Friction Stir Welding, J. Mater. Process. Technol., 2008, 200, p 364–372CrossRef

26.

C.I. Chang, X.H. Du, and J.C. Huang, Achieving Ultrafine Grain Size in Mg-Al-Zn Alloy by Friction Stir Processing, Scripta Mater., 2007, 57, p 209–212CrossRef

27.

C.I. Chang, X.H. Du, and J.C. Huang, Producing Nanograined Microstructure in Mg-Al-Zn Alloy by Two-Step Friction Stir Processing, Scripta Mater., 2008, 59, p 356–359CrossRef

28.

R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. R, 2005, 50, p 1–78CrossRef

29.

H.S. Arora, H. Singh, and B.K Dhindaw, Some Observations on Microstructural Changes in a Mg-Based AE42 Alloy Subjected to Friction Stir Processing, Metall. Mater. Trans. B, 2011. doi:10.1007/s11663-011-9573-7

30.

R. Roy, Designs with Interactions, A primer on Taguchi Method, Van Nostrand Reinhold, New York, 1990, p 61

31.

A. Yazdipoura, A. Shafiei, and K. Dehghani, Modeling the Microstructural Evolution and Effect of Cooling Rate on the Nanograins Formed During the Friction Stir Processing of Al5083, Mater. Sci. Eng., A, 2009, 527, p 192–197CrossRef

Titel: Parametric Study of Friction Stir Processing of Magnesium-Based AE42 Alloy
verfasst von: H. S. Arora
H. Singh
B. K. Dhindaw
Publikationsdatum: 01.11.2012
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2012
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-012-0205-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2012

Influence of Additional Tensile Force on Springback of Tube Under Rotary Draw Bending

The role of Metal-Matrix Composite development During Friction Stir Welding of Aluminum to Brass in Weld Characteristics

Gas Forming a V-Shape Aluminum Sheet into a Trough of Saddle-Contour

Influence of De-icers on the Corrosion and Fatigue Behavior of 4140 Steel

Fatigue-Life Computational Analysis for the Self-Expanding Endovascular Nitinol Stents

Curcumin Derivatives as Green Corrosion Inhibitors for α-Brass in Nitric Acid Solution

Premium Partner

Marktübersichten