nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.10.2014

Evaluation of Microstructure and Mechanical Properties in Dissimilar Austenitic/Super Duplex Stainless Steel Joint

verfasst von: Mehdi Rahmani, Abbas Eghlimi, Morteza Shamanian

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

To study the effect of chemical composition on microstructural features and mechanical properties of dissimilar joints between super duplex and austenitic stainless steels, welding was attempted by gas tungsten arc welding process with a super duplex (ER2594) and an austenitic (ER309LMo) stainless steel filler metal. While the austenitic weld metal had vermicular delta ferrite within austenitic matrix, super duplex stainless steel was mainly comprised of allotriomorphic grain boundary and Widmanstätten side plate austenite morphologies in the ferrite matrix. Also the heat-affected zone of austenitic base metal comprised of large austenite grains with little amounts of ferrite, whereas a coarse-grained ferritic region was observed in the heat-affected zone of super duplex base metal. Although both welded joints showed acceptable mechanical properties, the hardness and impact strength of the weld metal produced using super duplex filler metal were found to be better than that obtained by austenitic filler metal.

Vorheriger Artikel A New Approach to Ultrasonic Degassing to Improve the Mechanical Properties of Aluminum Alloys

Nächster Artikel Experimental Study of the Forces Acting on the Tool in the Friction-Stir Welding of AA 2024 T3 Sheets

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M.F. McGuire, Stainless Steels for Design Engineers, ASM International, Materials Park, OH, 2008

H.-Y. Liou, R.-I. Hsieh, and W.-T. Tsai, Microstructure and Stress Corrosion Cracking in Simulated Heat-Affected Zones of Duplex Stainless Steels, Corros. Sci., 2002, 44(12), p 2841–2856CrossRef

J.C. Lippold and D.J. Kotecki, Welding Metallurgy and Weldability of Stainless Steels, Wiley, Hoboken, NJ, 2005

H. Naffakh, M. Shamanian, and F. Ashrafizadeh, Dissimilar Welding of AISI, 310 Austenitic Stainless Steel to Nickel-Based Alloy Inconel 657, J. Mater. Process. Technol., 2009, 209(7), p 3628–3639CrossRef

S. Bae and H. Lee, Effect of Mo Contents on Corrosion Behaviors of Welded Duplex Stainless Steel, Met. Mater. Int., 2013, 19(3), p 563–569CrossRef

J. Nowacki and A. Łukojc, Microstructural Transformations of Heat Affected Zones in Duplex Steel Welded Joints, Mater. Charact., 2006, 56(4-5), p 436–441CrossRef

A.J. Ramirez, J.C. Lippold, and S.D. Brandi, The Relationship Between Chromium Nitride and Secondary Austenite Precipitation in Duplex Stainless Steels, Metall. Mater. Trans. A, 2003, 34A(8), p 1575–1597CrossRef

N. Sathirachinda, R. Pettersson, S. Wessman, U. Kivisäkk, and J. Pan, Scanning Kelvin Probe Force Microscopy Study of Chromium Nitrides in 2507 Super Duplex Stainless Steel—Implications and Limitations, Electrochim. Acta, 2011, 56(4), p 1792–1798CrossRef

C.M. Garzón and A.J. Ramirez, Growth Kinetics of Secondary Austenite in the Welding Microstructure of a UNS S32304 Duplex Stainless Steel, Acta Mater., 2006, 54(12), p 3321–3331CrossRef

10.

J. Li, T. Wu, and Y. Riquier, σ Phase Precipitation and Its Effect on the Mechanical Properties of a Super Duplex Stainless Steel, Mater. Sci. Eng. A, 1994, 174(2), p 149–156CrossRef

11.

M.E. Wilms, V.J. Gadgil, J.M. Krougman, and F.P. Ijsseling, The Effect of σ-Phase Precipitation at 800 °C on the Corrosion Resistance in Sea-Water of a High Alloyed Duplex Stainless Steel, Corros. Sci., 1994, 36(5), p 871–881CrossRef

12.

H.M. Ezuber, A. El-Houd, and F. El-Shawesh, Effects of Sigma Phase Precipitation on Seawater Pitting of Duplex Stainless Steel, Desalination, 2007, 207(1-3), p 268–275CrossRef

13.

Y.-S. Park, S.-T. Kim, I.-S. Lee, and C.-B. Song, Effects of Rare Earth Metals Addition and Aging Treatment on the Corrosion Resistance and Mechanical Properties of Super Duplex Stainless Steels, Met. Mater. Int., 2002, 8(3), p 309–318CrossRef

14.

D.M. Escriba, E. Materna-Morris, R.L. Plaut, and A.F. Padilha, Chi-Phase Precipitation in a Duplex Stainless Steel, Mater. Charact., 2009, 60(11), p 1214–1219CrossRef

15.

S.-H. Byun, N. Kang, T.-H. Lee, S.-K. Ahn, H. Lee, W.-S. Chang, and K.-M. Cho, Kinetics of Cr/Mo-Rich Precipitates Formation for 25Cr-6.9Ni-3.8Mo-0.3N Super Duplex Stainless Steel, Met. Mater. Int., 2012, 18(2), p 201–207CrossRef

16.

R.A. Perren, T. Suter, C. Solenthaler, G. Gullo, P.J. Uggowitzer, H. Böhni, and M.O. Speidel, Corrosion Resistance of Super Duplex Stainless Steels in Chloride Ion Containing Environments: Investigations by Means of a New Microelectrochemical Method: II. Influence of Precipitates, Corros. Sci., 2001, 43(4), p 727–745CrossRef

17.

Y. Yang, B. Yan, J. Li, and J. Wang, The Effect of Large Heat Input on the Microstructure and Corrosion Behaviour of Simulated Heat Affected Zone in 2205 Duplex Stainless Steel, Corros. Sci., 2011, 53(11), p 3756–3763CrossRef

18.

Y. Shin, H. Shin, and H. Lee, Effects of Heat Input on Pitting Corrosion in Super Duplex Stainless Steel Weld Metals, Met. Mater. Int., 2012, 18(6), p 1037–1040CrossRef

19.

V. Muthupandi, P. Bala-Srinivasan, S.K. Seshadri, and S. Sundaresan, Effect of Weld Metal Chemistry and Heat Input on the Structure and Properties of Duplex Stainless Steel Welds, Mater. Sci. Eng. A, 2003, 358(1-2), p 9–16CrossRef

20.

J. £abanowski, Mechanical Properties and Corrosion Resistance of Dissimilar Stainless Steel Welds, Arch. Mater. Sci. Eng., 2007, 28(1), p 27–33

21.

S.W. Russell and C.D. Lundin: Behavior of Duplex Stainless Steel Castings, Volume 2: The Development of Qualification Standards for Cast Duplex Stainless Steel, DE-FC36-00 ID13975, U.S. Department of Energy, The University of Tennessee, Knoxville, 2000–2005

22.

J.O. Nilsson, L. Karlsson, and J.O. Andersson, Secondary Austenite Formation and Its Relation to Pitting Corrosion in Duplex Stainless Steel Weld Metal, Mater. Sci. Technol., 1995, 11(3), p 276–283CrossRef

23.

A. Eghlimi, M. Shamanian, and K. Raeissi, Dilution and Ferrite Number Prediction in Pulsed Current Cladding of Super-Duplex Stainless Steel Using RSM, J. Mater. Eng. Perform., 2013, 22(12), p 3657–3664CrossRef

24.

M. Martins, S.M. Rossitti, M. Ritoni, and L.C. Casteletti, Effect of Stress Relief at 350 °C and 550 °C on the Impact Properties of Duplex Stainless Steels, Mater. Charact., 2007, 58(10), p 909–916CrossRef

25.

AWS A4.2, Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal, 1997

26.

ASME, Welding, Brazing, and Fusing Qualifications, Boiler and Pressure Vessel Code Section IX, 2013

27.

AWS B4.0, Standard Methods For Mechanical Testing of Welds, 2007

28.

A. Eghlimi, M. Shamanian, and K. Raeissi, Effect of Current Type on Microstructure and Corrosion Resistance of Super Duplex Stainless Steel Claddings Produced by the Gas Tungsten Arc Welding Process, Surf. Coat. Technol., 2014, 244, p 45–51CrossRef

29.

S. Atamert and J.E. King, Super Duplex Stainless Steels—Part 1: Heat Affected Zone Microstructures, Mater. Sci. Technol., 1992, 8(10), p 896–912CrossRef

30.

ASTM A923, Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels, 2003

31.

S. Kou, Welding Metallurgy, 2nd ed., Wiley-Interscience, Hoboken, NJ, 2003

32.

L. Chen, H. Tan, Z. Wang, J. Li, and Y. Jiang, Influence of Cooling Rate on Microstructure Evolution and Pitting Corrosion Resistance in the Simulated Heat-Affected Zone of 2304 Duplex Stainless Steels, Corros. Sci., 2012, 58(May), p 168–174CrossRef

33.

A.J. Ramirez, S.D. Brandi, and J.C. Lippold, Secondary Austenite and Chromium Nitride Precipitation in Simulated Heat Affected Zones of Duplex Stainless Steels, Sci. Technol. Weld. Join., 2004, 9(4), p 301–313CrossRef

34.

J.M. Pardal, S.S.M. Tavares, M.C. Fonseca, J.A. de-Souza, R.R.A. Côrte, and H.F.G. de-Areu, Influence of the Grain Size on Deleterious Phase Precipitation in Superduplex Stainless Steel UNS S32750, Mater. Charact., 2009, 60(3), p 165–172CrossRef

35.

V. Gunaraj and N. Murugan, Prediction of Heat-Affected Zone Characteristics in Submerged Arc Welding of Structural Steel Pipes, Weld. J., 2002, 81(3), p 45S–53S

36.

P. Kangas, B. Walden, G. Berglund, and M. Nicholls, Ferritic-Austenitic Stainless Steel and Use of the Steel, European Patent Office, Patent No EP0708845 B1, Sandvik Aktiebolag, 1999, p 5–6

37.

N.A. McPherson, K. Chi, M.S. McLean, and T.N. Baker, Structure and properties of carbon steel to duplex stainless steel submerged arc welds, Mater. Sci. Technol., 2003, 19(2), p 219–226

38.

L.R. Carney and J.J. Mecholsky, Jr., Relationship Between Fracture Toughness and Fracture Surface Fractal Dimension in AISI, 4340 Steel, Mater. Sci. Appl., 2013, 4(4), p 258–267

39.

P.B. Srinivasan, V. Muthupandi, W. Dietzel, and V. Sivan, An Assessment of Impact Strength and Corrosion Behaviour of Shielded Metal arc Welded Dissimilar Weldments Between UNS 31803 and IS 2062 Steels, Mater. Des., 2006, 27(3), p 182–191CrossRef

Titel: Evaluation of Microstructure and Mechanical Properties in Dissimilar Austenitic/Super Duplex Stainless Steel Joint
verfasst von: Mehdi Rahmani
Abbas Eghlimi
Morteza Shamanian
Publikationsdatum: 01.10.2014
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 10/2014
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-014-1136-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2014

Experimental Study of the Forces Acting on the Tool in the Friction-Stir Welding of AA 2024 T3 Sheets

Microstructure and Toughness of Simulated Heat-Affected Zone of Laser Welded Joint for 960 MPa Grade High Strength Steel

Study of Electrical, Mechanical, and Tribological Properties of CrN x Thin Films as a Function of Sputtering Conditions

Synthesis, Characterization, and Gas Sensing Properties of Pure and Mn-doped ZnO Nanocrystalline Particles

Hydrogen Evolution Under Visible Light on CdS Nano-Rod

Microstructure Evolution and Tensile Properties of Laser-TIG Hybrid Welds of Ti2AlNb-Based Titanium Aluminide

Premium Partner

Marktübersichten