nach oben

Journal of Materials Engineering and Performance

Erschienen in:

31.08.2017

Microstructure, Growth Kinetics and Some Mechanical Properties of Boride Layers Produced on Pure Titanium by Molten-Salt Boriding

verfasst von: L. S. Ma, Y. H. Duan, P. Li

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 9/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

To modify the surface properties of pure titanium, boride layers had been fabricated by the boron molten-salt diffusion on pure titanium surfaces in the temperature range of 900-1100 °C for 5- to 30-h treatments. The results demonstrated that the boride layers were mainly composed of TiB whiskers and TiB₂ layers without the rutile titanium oxide TiO₂. Two diffusion models were introduced to model the growth kinetics of boride layers. The parabolic growth constants and the boron diffusion coefficients were obtained. The boron activation energies for TiB₂ and TiB were 225.617 and 165.266 kJ mol⁻¹, respectively. The surface microhardness of the borided titanium decreased with the increase in distance from the surface. The results of wear tests indicated that the wear properties had been improved significantly compared to the pure titanium under dry sliding conditions.

Vorheriger Artikel Effect of Aging on Precipitation Behavior and Pitting Corrosion Resistance of SAF2906 Super Duplex Stainless Steel

Nächster Artikel Aging Time-Microstructure-Mechanical Property Correlation of a Ni-17Mo-7Cr-Based Superalloy Subjected to Simulated Heat-Affected Zone Thermal Treatment

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

C. Leyens and M. Peters, Titanium and Titanium Alloys, Wiley-VCH, Weinheim, 2003CrossRef

E.O. Ezugwu and Z.M. Wang, Titanium Alloys and Their Machinability—A Review, J. Mater. Process. Technol., 1997, 68(3), p 262–274CrossRef

M. Long and H.J. Rack, Titanium Alloys in Total Joint Replacement—A Materials Science Perspective, Biomaterials, 1998, 19(18), p 1621–1639CrossRef

P.J. Blau, B.C. Jolly, J. Qu, W.H. Peter, and C.A. Blue, Tribological Investigation of Titanium-Based Materials for Brakes, Wear, 2007, 263(7), p 1202–1211CrossRef

C. Lee, A. Sanders, N. Tikekar, and K.S.R. Chandran, Tribology of Titanium Boride-Coated Titanium Balls Against Alumina Ceramic: Wear, Friction, and Micromechanisms, Wear, 2008, 265(3), p 375–386CrossRef

C. Fei, Z. Hai, C. Chen, and X. Yangjian, Study on the Tribological Performance of Ceramic Coatings on Titanium Alloy Surfaces Obtained Through Microarc Oxidation, Prog. Org. Coat., 2009, 64(2), p 264–267CrossRef

B. Ya, B. Zhou, H. Yang, B. Huang, F. Jia, and X. Zhang, Microstructure and Mechanical Properties of In Situ Casting TiC/Ti6Al4 V Composites Through Adding Multi-Walled Carbon Nanotubes, J. Alloys Compd., 2015, 637, p 456–460CrossRef

G. Jin, B.S. Xu, H.D. Wang, Q.F. Li, and S.C. Wei, Investigation on the Formation and Wear Resistance of TiC Coatings, Mater. Sci. Eng. A, 2006, 435, p 355–359CrossRef

X. Nie, A. Leyland, and A. Matthews, Deposition of Layered Bioceramic Hydroxyapatite/TiO₂ Coatings on Titanium Alloys Using a Hybrid Technique of Micro-Arc Oxidation and Electrophoresis, Surf. Coat. Technol., 2000, 125(1), p 407–414CrossRef

10.

L.S. Dubrovinsky, N.A. Dubrovinskaia, V. Swamy, J. Muscat, N.M. Harrison, R. Ahuja, B. Holm, and B. Johansson, Materials Science: The Hardest Known Oxide, Nature, 2001, 410(6829), p 653–654CrossRef

11.

H. Dong and X.Y. Li, Oxygen Boost Diffusion for the Deep-Case Hardening of Titanium Alloys, Mater. Sci. Eng. A, 2000, 280(2), p 303–310CrossRef

12.

K.W. Lee, Y.W. Chung, C.Y. Chan, I. Bello, S.T. Lee, A. Karimi, J. Patscheider, M.P. Delplancke-Ogletree, D. Yang, B. Boyce, and T. Buchheit, An International Round-Robin Experiment to Evaluate the Consistency of Nanoindentation Hardness Measurements of Thin Films, Surf. Coat. Technol., 2003, 168(1), p 57–61CrossRef

13.

S. Wilson and A.T. Alpas, Tribo-Layer Formation During Sliding Wear of TiN Coatings, Wear, 2000, 245(1), p 223–229CrossRef

14.

S. PalDey and S.C. Deevi, Single Layer and Multilayer Wear Resistant Coatings of (Ti, Al)N: A Review, Mater. Sci. Eng. A, 2003, 342(1), p 58–79CrossRef

15.

A. Agarwal and N.B. Dahotre, Laser Surface Engineering of Steel for Hard Refractory Ceramic Composite Coating, Int. J. Refract. Met. H., 1999, 17(4), p 283–293CrossRef

16.

H.R. Ogden and R.I. Jaffee, The Effects of Carbon, Oxygen, and Nitrogen on the Mechanical Properties of Titanium and Titanium Alloys, Columbus, OH, 1955CrossRef

17.

F.H. Li, Z.G. Fan, X.H. Yi, J.L. Zhang, and D.T. Gong, Growth Kinetics of Titanium Boride Layers on the Surface of Ti6Al4 V, Acta Metall. Sin-Engl., 2010, 23(4), p 293–300

18.

L. Qin, C. Liu, K. Yang, and B. Tang, Characteristics and Wear Performance of Borided Ti6Al4V Alloy Prepared by Double Glow Plasma Surface Alloying, Surf. Coat. Tech., 2013, 225, p 92–96CrossRef

19.

N.M. Tikekar, K.S.R. Chandran, and A. Sanders, Nature of Growth of Dual Titanium Boride Layers with Nanostructured Titanium Boride Whiskers on the Surface of Titanium, Scripta Mater., 2007, 57(3), p 273–276CrossRef

20.

A.G. von Matuschka, Boronizing, Carl Hanser Verlag, München, 1980

21.

A.K. Sinha, Boriding (Boronizing) of Steels, ASM Handbook, Materials Park, 1990

22.

G. Kartal, S. Timur, M. Urgen, and A. Erdemir, Electrochemical Boriding of Titanium for Improved Mechanical Properties, Surf. Coat. Technol., 2010, 204(23), p 3935–3939CrossRef

23.

P. Kaestner, J. Olfe, and K.-T. Rie, Plasma-Assisted Boriding of Pure Titanium and TiAl6V4, Surf. Coat. Tech., 2001, 142–144, p 248–252CrossRef

24.

B. Sarma and K.S.R. Chandran, Accelerated Kinetics of Surface Hardening by Diffusion Near Phase Transition Temperature: Mechanism of Growth of Boride Layers on Titanium, Acta Mater., 2011, 59(10), p 4216–4228CrossRef

25.

S. Aich and K.S.R. Chandran, TiB Whisker Coating on Titanium Surfaces by Solid-State Diffusion: Synthesis, Microstructure, and Mechanical Properties, Metall. Mater. Trans. A, 2002, 33(11), p 3489–3498CrossRef

26.

B. Sarman, N.M. Tikekar, and K.S.R. Chandran, Kinetics of Growth of Superhard Boride layers During Solid State Diffusion of Boron into Titanium, Ceram. Int., 2012, 38(8), p 6795–6805CrossRef

27.

K.B. Panda and K.S.R. Chandran, Titanium-Titanium Boride (Ti-TiB) Functionally Graded Materials Through Reaction Sintering: Synthesis, Microstructure, and Properties, Metall. Mater. Trans. A, 2003, 34(9), p 1993–2003CrossRef

28.

H. Celikkan, M.K. Ozturk, H. Aydin, and M.L. Aksu, Boriding Titanium Alloys at Lower Temperatures Using Electrochemical Methods, Thin Solid Films, 2007, 515(13), p 5348–5352CrossRef

29.

B.J. Kooi, Y.T. Pei, and J.T.M. De Hosson, The Evolution of Microstructure in a Laser Clad TiB-Ti Composite Coating, Acta Mater., 2003, 51(3), p 831–845CrossRef

30.

C.M. Brakman, A.W.J. Gommers, and E.J. Mittemeijer, Boriding of Fe and Fe–C, Fe–Cr, and Fe–Ni Alloys; Boride-Layer Growth Kinetics, J. Mater. Res., 1989, 4(6), p 1354–1370CrossRef

31.

J.L. Murray, P.K. Liao, and K.E. Spear, The B–Ti (Boron–Titanium) System, Bull. Alloy Phase Diagr., 1986, 7(6), p 550–555CrossRef

32.

H. Schmidt, G. Borchardt, C. Schmalzried, R. Telle, S. Weber, and H. Scherrer, Self-Diffusion of Boron in TiB₂, J. Appl. Phys., 2003, 93(2), p 907–911CrossRef

33.

J.M. Sanchez and D. De Fontaine, Anomalous Diffusion in Omega Forming Systems, Acta Metall., 1978, 26(7), p 1083–1095CrossRef

34.

N. Makuch, M. Kulka, M. Keddam, S. Taktak, V. Ataibis, and P. Dziarski, Growth Kinetics and Some Mechanical Properties of Two-Phase Boride Layers Produced on Commercially Pure Titanium During Plasma Paste Boriding, Thin Solid Films, 2017, 626, p 25–37CrossRef

35.

M. Keddam, S. Taktak, and S. Tasgetiren, A Diffusion Model for the Titanium Borides on Pure Titanium, Surf. Eng., 2016, 32(11), p 802–808CrossRef

36.

Z. Fan, Z.X. Guo, and B. Cantor, The Kinetics and Mechanism of Interfacial Reaction in Sigma Fibre-Reinforced Ti MMCs, Compos. Part A, 1997, 28(2), p 131–140CrossRef

37.

G. Kartal and S. Timur, Growth Kinetics of Titanium Borides Produced by CRTD-Bor Method, Surf. Coat. Technol., 2013, 215, p 440–446CrossRef

38.

N.T. Taazim, I. Jauhari, Y. Miyashita, and M.F.M. Sabri, Development and Kinetics of TiB₂ Layers on the Surface of Titanium Alloy by Superplastic Boronizing, Metall. Mater. Trans. A, 2016, 47(5), p 2217–2222CrossRef

39.

R.G. Munro, Material Properties of Titanium Diboride, J. Res. Natl. Inst. Stand., 2000, 105(5), p 709–720CrossRef

40.

S. Madtha, C. Lee, and K.S.R. Chandran, Physical and Mechanical Properties of Nanostructured Titanium Boride (TiB) Ceramic, J. Am. Ceram. Soc., 2008, 91(4), p 1319–1321CrossRef

41.

N. Poondla, T.S. Srivatsan, A. Patnaik, and M. Petraroli, A Study of the Microstructure and Hardness of two Titanium Alloys: Commercially Pure and Ti-6Al-4 V, J. Alloys Compd., 2009, 486(1), p 162–167CrossRef

42.

H.R. Ogden and R.I. Jaffee, Titanium-Boron Alloys, JOM, 1951, 3, p 335

43.

T.M.T. Godfrey, A. Wisbey, P.S. Goodwin, K. Bagnall, and C.M. Ward-Close, Microstructure and Tensile Properties of Mechanically Alloyed Ti-6A1-4 V with Boron Additions, Mater. Sci. Eng. A, 2000, 282(1–2), p 240–250CrossRef

44.

E. Atar, E.S. Kayali, and H. Cimenoglu, Characteristics and Wear Performance of Borided Ti6Al4V Alloy, Surf. Coat. Tech., 2008, 202(19), p 4583–4590CrossRef

45.

R. Boyer, G. Welsch, and E.W. Collings, Materials Properties Handbook: Titanium Alloys, ASM International, Materials Park, 1994

46.

C. Guo, J. Zhou, J. Zhao, B. Guo, Y. Yu, H. Zhou, and J. Chen, Microstructure and Friction and Wear Behavior of Laser Boronizing Composite Coatings on Titanium Substrate, Appl. Surf. Sci., 2011, 257(9), p 4398–4405CrossRef

47.

Y.S. Tian, C.Z. Chen, D.Y. Wang, Q.H. Huo, and T.Q. Lei, Laser Surface Alloying of Pure Titanium with TiN-B-Si-Ni Mixed Powders, Appl. Surf. Sci., 2005, 250(1), p 223–227CrossRef

48.

Y.S. Zhu, W.Z. Lu, D.W. Zuo, W. Feng, and Y.F. He, Microstructure and Tribological Properties of REs Borided TC21 Alloy, Surf. Eng., 2014, 30(8), p 612–618CrossRef

49.

W.J. Lu, D. Zhang, X.N. Zhang, R.J. Wu, T. Sakata, and H. Mori, HREM Study of TiB/Ti Interfaces in a TiB-TiC In Situ Composite, Scr. Mater., 2001, 44(7), p 1069–1075CrossRef

Titel: Microstructure, Growth Kinetics and Some Mechanical Properties of Boride Layers Produced on Pure Titanium by Molten-Salt Boriding
verfasst von: L. S. Ma
Y. H. Duan
P. Li
Publikationsdatum: 31.08.2017
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 9/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2884-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2017

Comparison Between Cemented Carbide and PCD Tools on Machinability of a High Silicon Aluminum Alloy

The Effect of Friction Stir Welding on Corrosion Behavior of Ti-6Al-4V

Fabrication and Properties of Novel NiWFeB Amorphous Alloys

Variation of Aging Precipitates and Mechanical Strength of Al-Cu-Li Alloys Caused by Small Addition of Rare Earth Elements

Dry Sliding Wear of TiAl-Graphene-Silver Composite at Elevated Temperatures

Processing–Microstructure–Crystallographic Texture–Surface Property Relationships in Friction Stir Processing of Titanium

Premium Partner

Marktübersichten