Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Bücher
Zeitschriften
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
SLX-Digitalkonferenz: Zukunftswerkstatt 2024

Mehr Umsatz mit Top-Kontakten

Am 7. Mai erfahren Sie, wie Vertriebsteams Leadgenerierung, Leadnurturing und Leadstrategien effizient steuern können.
Erweiterte Suche
Anmelden
nach oben
International Journal of Material Forming
Erschienen in: International Journal of Material Forming 5/2021

07.07.2021 | Original Research

A different attempt to improve the formability of aluminum tailor welded blanks (TWB) produced by the FSW

verfasst von: Mahmoud Abbasi, Behrouz Bagheri, Amin Abdollahzadeh, Ahmad Ostovari Moghaddam

Erschienen in: International Journal of Material Forming | Ausgabe 5/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Tailor welded blanks (TWBs) are produced by welding blanks with different characteristics as such thickness and/or coating and/or material, etc. The forming characteristics of a TWB are different from typical sheets, as TWB is a combined blank each section has its own forming behavior. The current investigation aims to analyze the formability characteristics of TWBs made by joining AA6061 aluminum alloy sheets with different thicknesses. The sheets were joined by friction stir welding (FSW) and also by an improved FSW entitled friction stir vibration welding (FSVW) method at different welding speeds, rotational speeds, and tool tilt angles. The Taguchi method was used for the design of experiments and mean analysis was applied to find the optimum values of welding processes. ANOVA was applied to find the effect of the welding processes on formability. The formability of the TWBs has been assessed with the help of the limiting dome height (LDH) criterion. According to optical microscopy (OM) and electron backscatter diffraction (EBSD) analyses, grains in the stir zone of FSVW-ed blanks were smaller than those in FSW-ed blanks. It was shown that based on the Frank-Read dislocation mechanism, the density of dislocations increased as vibration used during FSW. From the results, it was concluded that the mechanical and formability behaviors of FSVW-ed blanks were higher than those of the FSW-ed blanks. It was also obtained that for the welding speed range studied in the current research, formability and mechanical behaviors of TWBs increased as welding speed increased.
Vorheriger Artikel Prediction of coupled 2D and 3D effects in springback of copper alloys after deep drawing
Nächster Artikel Sustainable manufacturing of ultra-fine aluminium alloy 6101 wires using controlled high levels of mechanical strain and finite element modeling

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Abbasi M, Bagheri B, Ketabchi M, Haghshenas DF (2012) Application of response surface methodology to drive GTN model parameters and determine the FLD of tailor welded blank. Comp Mater Sci 53:368–376CrossRef
2.
Choi HS, Ko DCh, Kim BM (2014) Effect of weld line orientation on formability of tailor welded blank of 22MnB5 at elevated temperature. Adv Mech Eng 16:2014
3.
Sheng ZQ (2008) Formability of tailor-welded strips and progressive forming test. J Mater Process Technol 205(1–3):81–88CrossRef
4.
Parente M, Safdarian R, Santos AD, Loureiro A, Vilaca P, Jorge RMN (2015) A study on the formability of aluminum tailor welded blanks produced by friction stir welding. Int J Adv Manuf Technol 83:2129–2141CrossRef
5.
Abbasi M, Bagheri B, Ketabchi M, Menhaj A, Sedighi M (2012) Investigation into tearing of tailor welded blanks. Proceedings of the 14th International Conference on Metal Forming. Steel Res In 83:583–588
6.
Salimi S, Bahemmat P, Haghpanahi M (2018) Study on residual stresses caused by underwater friction stir welding: FE modeling and ultrasonic measurement. Proc IMechE Part E: J Proc Mech Eng 233(1):118–137
7.
Panicker SS, Panda SK (2019) Investigations into improvement in formability of AA5754 and AA6082 sheets at elevated temperatures. J Mater Eng Perform 28:2967–2982CrossRef
8.
Miles MP, Decker BJ, Nelson TW (2004) Formability and strength of friction-stir-welded aluminum sheets. Metall Mater Trans A 35(A):3461–3468CrossRef
9.
Abbasi M, Ketabchi M, Shakeri HR, Shafaat MA (2011) Obtaining high formability of IF-galvanized steel tailor welded blanks by applying optimum CO2 laser welding parameters. Int J Mat Res 102:1295–1302CrossRef
10.
Khalkhali A, Sarmadi M, Sarikhani E (2016) Investigation on the best process criteria for lap joint friction stir welding of AA1100 aluminum alloy via Taguchi technique and ANOVA. Proc IMechE Part E: J Proc Mech Eng 231(2):329–342
11.
Abbasi M, Hamzeloo SR, Ketabchi M, Shafaat MA, Bagheri B (2014) Analytical method for prediction of weld line movement during stretch forming of tailor-welded blanks. Int J Adv Manuf Technol 73:999–1009CrossRef
12.
Keivani R, Bagheri B, Sharifi F, Ketabchi M, Abbasi M (2013) Effects of pin angle and preheating on temperature distribution during friction stir welding operation. Trans Nonferrous Metal Soc China 23(9):2708–2713CrossRef
13.
Jafari M, Abbasi M, Poursina D, Gheysarian A, Bagheri B (2017) Microstructures and mechanical properties of friction stir welded dissimilar steel-copper joints. J Mech Sci Technol 31(3):1135–1142CrossRef
14.
Gao S, Wu CS, Padhy GK (2017) Material flow, microstructure and mechanical properties of friction stir welded AA 2024-T3 enhanced by ultrasonic vibrations. J Manuf Proc 30:385–395CrossRef
15.
Abbasi M, Abdollahzadeh A, Omidvar H, Bagheri B, Rezaei M (2016) Incorporation of SiC particles in FS Welded zone of AZ31 Mg alloy to improve the mechanical properties and corrosion resistance. In J Mater Res 107:566–572CrossRef
16.
Leitao C, Zhang BK, Padmanabhan R, Rodrigues DM (2011) Influence of weld geometry and mismatch on formability of aluminium tailor welded blanks: numerical and experimental analysis. Sci Technol Weld Join 16(8):662–668CrossRef
17.
Kim D, Lee W, Kim J, Kim C, Chung K (2010) Formability evaluation of friction stir welded 6111-T4 sheet with respect to joining material direction. Int J Mech Sci 52(4):612–625CrossRef
18.
Rodrigues DM, Loureiro A, Leitao C, Leal RM, Chaparro BM, Vilaça P (2009) Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds. Mater Des 30(6):1913–1921CrossRef
19.
Ericsson M, Sandstrom R (2003) Influence of feed rate on the fatigue of friction stir welds, and comparison with MIG and TIG. Int J Fatigue 25:1379–1387CrossRef
20.
Lee W, Chung KH, Kim D, Kim J, Kim Ch, Okamoto K, Wagoner RH, Chung K (2009) Experimental and numerical study on formability of friction stir welded TWB sheets based on hemispherical dome stretch tests. In J Plast 25:1626–1654CrossRef
21.
Golezani AS, Barenji RV, Heidarzedh A, Pouraliakbar H (2015) Elucidating of tool rotational speed in friction stir welding of 7020-T6 aluminum alloy. In J Adv Manuf Technol 81:1155–1164CrossRef
22.
Kesharwani RK, Panda SK, Pal SK (2015) Experimental investigations on formability of aluminum tailor friction stir welded blanks in deep drawing process. J Mater Eng Perform 24(2):1038–1049CrossRef
23.
Bagheri B, Abbasi M, Dadaei M (2020) Effect of water cooling and vibration on the performances of friction stir-welded AA5083 aluminum joints. J Metall Micro Anal 9:33–46
24.
Barooni O, Abbasi M, Givi M, Bagheri B (2017) New method to improve the microstructure and mechanical properties of joint obtained using FSW. Int J Adv Manuf Technol 93:4371–4378CrossRef
25.
Yang Ch, Wu ChS, Shi L (2020) Effect of ultrasonic vibration on dynamic recrystallization in friction stir welding. J Manuf Proc 56:87–95CrossRef
26.
Rahmi M, Abbasi M (2017) Friction stir vibration welding process: modified version of friction stir welding process. In J Adv Manuf Technol 90:141–151CrossRef
27.
Liu XC, Wu CS, Padhy GK (2015) Improved weld macrosection, microstructure and mechanical properties of 2024Al-T4 butt joints in ultrasonic vibration enhanced friction stir welding. Sci Technol Weld Join 20:345–352CrossRef
28.
Padhy GK, Wu CS, Gao S, Shi L (2016) Local microstructure evolution in Al 6061-T6 friction stir weld nugget enhanced by ultrasonic vibration. Mater Des 92:710–723CrossRef
29.
Wu M, Wu ChS, Gao S (2017) Effect of ultrasonic vibration on fatigue performance of AA 2024-T3 friction stir weld joints. J Manuf Proc 29:85–95CrossRef
30.
Hosford WF, Caddell RM (1993) Metal Forming – Mechanics and metallurgy, 2nd edn. Prentice Hall, Hoboken
31.
Padmanabhan R, Oliveira MC, Menezes LF (2008) Deep drawing of aluminum-steel tailor-welded blanks. Mater Des 29:154–160CrossRef
32.
Bagheri B, Abbasi M (2020) Development of AZ91/SiC surface composite by FSP: Effect of vibration and process parameters on microstructure and mechanical characteristics. Adv Manuf 8:82–96
33.
Heidarzadeh A, Saeid T, Klemm V (2016) Microstructure, texture, and mechanical properties of friction stir welded commercial brass alloy. Mater Character 119:84–91CrossRef
34.
Li YS, Zhang Y, Tao NR, Lu K (2009) Effect of the Zener- Hollomon parameter on the microstructure and mechanical properties of Cu subjected to plastic deformation. Acta Mater 57:761–772CrossRef
35.
Jonas JJ, Quelennec X, Jiang L, Martin E (2009) The avrami kinetics of dynamic recrystallization. Acta Mater 57:2748–2756CrossRef
36.
Khorrami MS, Kazeminezhad M, Kokabi AH (2012) Mechanical properties of severely plastic deformation aluminum sheets joined by friction stir welding. Mater Sci Eng A 543:243–248CrossRef
37.
Fouladi S, Abbasi M (2017) The effect of friction stir vibration welding process on characteristics of SiO2 incorporated joint. J Mater Proc Technol 243:23–30CrossRef
38.
Wang B, Lei BB, Zhu JX, Feng Q, Wang L, Wu D (2015) EBSD study on microstructure and texture of friction stir welded AA5052-O and AA6061-T6 dissimilar joint. Mater Des 87:593–599CrossRef
39.
Yadav D, Bauri R (2012) Effect of friction stir processing on microstructure and mechanical properties of aluminium. Mater Sci Eng A 539:85–92CrossRef
40.
Suhuddin UFHR, Mironov S, Sato YS, Kokawa H (2010) Grain structure and texture evolution during friction stir welding of thin 6016 aluminum alloy sheets. Mater Sci Eng A 527:1962–1969CrossRef
41.
Fonda RW, Knipling KE (2011) Texture development in friction stir welds. Sci Technol Weld Join 16:288–293CrossRef
42.
Frigaard Ø, Grong Ø, Midling OT (2001) A process model for friction stir welding of age hardening aluminum alloys. Metall Mat Trans A 32:1189–1200CrossRef
43.
Wang YN, Chen SJ, Dong XC (2007) Dislocation theory and its applications. Metall In Press, Beijing, pp 62–75
44.
Bagheri B, Abbasi M, Dadaei M (2020) Mechanical behavior and microstructure of AA6061-T6 joints made by friction stir vibration welding. J Mater Eng Perform 29:1165–1175CrossRef
45.
Cizek L, Gregera M, Pawlicaa L, Dobrzanskib LA, Tanskib T (2004) Study of selected properties of magnesium alloy AZ91 after heat treatment and forming. J Mater Proc Technol 157–158:466 – 71
46.
Chang CI, Lee CJ, Huang JC (2004) Relationship between grain size and Zener– Holloman parameter during friction stir processing in AZ31 Mg alloys. Script Mater J 51:509–514CrossRef
47.
Abbasi M, Abdollahzadeh A, Bagheri B, Omidvar H (2015) The effect of SiC particle addition during FSW on microstructure and mechanical properties of AZ31 magnesium alloy. J Mater Eng Perform 24:5037–5045CrossRef
48.
Bagheri B, Abbasi M, Abdollahzadeh A, Omidvar H (2020) Advanced approach to modify friction stir spot welding process. Metal Mater Int 26:1562–1573CrossRef
49.
Rose AR, Manisekar K, Balasubramanian V (2012) Influence of welding speed on tensile properties of friction stir welded AZ61 magnesium alloy. J Mater Eng Perform 21:257–265CrossRef
50.
Yang DZ (1991) Dislocation and metal strengthening mechanism. Harbin Institute of Technology Press, Harbin, pp 107–134
51.
Uthaisangsuk V (2009) Microstructure based formability modeling of multiphase steels. Ph. D. Thesis, IEHK, RWTH- Aachen
52.
Bagheri B, Abbasi M, Abdollahzadeh A, Mirsalehi SE (2020) The effect of second phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP. Trans Nonferrous Metal Soc China 30:905–916CrossRef
53.
Abdollahzadeh A, Bagheri B, Abbasi M, Kokabi AH, Moghaddam AO (2021) Comparison of the weldability of AA6061-T6 joint under different friction stir welding conditions. J Mater Eng Perform 30:1110–1127CrossRef
54.
Bagheri B, Abbasi M, Hamzeloo R (2020) The investigation into vibration effect on microstructure and mechanical characteristics of friction stir spot vibration welded aluminum: Simulation and experiment. Proc In Mech Eng Part C: J Mech Eng Sci 234(9):1809–1822CrossRef
55.
Uthaisanguk V, Bleck W (2009) Microstructure based formability modelling of multiphase steels. Shaker Verlag, Herzogenrath
56.
Lijay Kj, Selvam JDR, Dinaharan I, Vuay SJ (2016) Microstructure and mechanical properties characterization of AA6061/TiC aluminum matrix composites synthesized by in situ reaction of silicon carbide and potassium fluotitanate. Trans Nonferrous Metal Soc China 26:1791–1800CrossRef
57.
Rajendran C, Srinivasan K, Balasubramanian V, Balaji H, Selvaraj P (2019) Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy. Trans Nonferrous Metal Soc China 29:1824–1835CrossRef
58.
Hull D, Bacon DB (2011) Introduction to dislocations. Butterworth-Heinemann, Britain, pp 87–95
Metadaten
Titel
A different attempt to improve the formability of aluminum tailor welded blanks (TWB) produced by the FSW
verfasst von
Mahmoud Abbasi
Behrouz Bagheri
Amin Abdollahzadeh
Ahmad Ostovari Moghaddam
Publikationsdatum
07.07.2021
Verlag
Springer Paris
Erschienen in
International Journal of Material Forming / Ausgabe 5/2021
Print ISSN: 1960-6206
Elektronische ISSN: 1960-6214
DOI
https://doi.org/10.1007/s12289-021-01632-w

Weitere Artikel der Ausgabe 5/2021

International Journal of Material Forming 5/2021 Zur Ausgabe

Original Research

Study of forming limit diagram (FLD) prediction of anisotropic sheet metals using Gurson model in M-K method

Original Research

Experimental and numerical investigation of the generated heat in polypropylene sheet joints using friction stir welding (FSW)

Original Research

Towards best practice in numerical simulation of blind rivet nut installation

Original Research

Prediction of coupled 2D and 3D effects in springback of copper alloys after deep drawing

Original Research

Study on barrelling behavior of variable-diameter tubes in axial hydro-forging sequence

Original Research

Fiber deformation behavior of discontinuous CFRTP in gear forging

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise