nach oben

Metals and Materials International

Erschienen in:

04.06.2020

Wear Resistance of Different Bionic Structure Manufactured by Laser Cladding on Ti6Al4V

verfasst von: Mengyao Wu, Xiaohong Zhan, Hengchang Bu, Lijun Liu, Yuanzeng Song, Yaping Li

Erschienen in: Metals and Materials International | Ausgabe 7/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, the laser cladding system with an IPG YLS-6000 fiber laser was used, and the WC–Ti6Al4V powder reinforced composite coatings on Ti6Al4V titanium alloy with various bionic structures were innovatively fabricated. The microstructures and surface damage behavior of the coatings were characterized by scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Additionally, the wear resistance of different bionic structures was evaluated, which had not been comprehensively explored in the published literature. The results indicated that the un-melted WC particles in the coatings act as a hard reinforcement, avoiding serious wear of the coating. In addition, the hard coatings exhibit excellent deformation resistance and the soft substrate cushion the shear stress. So when the “Ratio”, which refers to the laser cladding area to sample area, is between 0.25 and 0.3, the sample has the highest wear resistance. Furthermore, the “Dot + Line” bionic structure has the best wear resistance compared with other structures. The separated line units and the addition of dot units can improve the stress concentration state of bionic structure are conducive to release the stress to the substrate under the cladding layer.

Graphic Abstract

Vorheriger Artikel Strain Rate Effects on the Mechanical Properties of an AlCoCrFeNi High-Entropy Alloy

Nächster Artikel Microstructural Evolution and Wear Behavior of AlCoCrCuFeNi High Entropy Alloy on Ti–6Al–4V Through Laser Surface Alloying

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S.Q. Wang, T.J. Ma, W.Y. Li, G.D. Wen, D.L. Chen, Microstructure and fatigue properties of linear friction welded TC4 titanium alloy joints. Sci. Technol. Weld. Join. 22(3), 1–5 (2016). https://doi.org/10.1080/13621718.2016.1212971CrossRef

Lin YH, Lei YP, Fu HG, Lin J (2015) Mechanical properties and toughening mechanism of TiB2/NiTi reinforced titanium matrix composite coating by laser cladding. Mater. Des. 80: 82–88. https://doi.org/10.1016/j.matdes.2015.05.009CrossRef

T. Debroy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, W. Zhang, Additive manufacturing of metallic components: process, structure and properties. Prog. Mater. Sci. 92, 112–224 (2018). https://doi.org/10.1016/j.pmatsci.2017.10.001CrossRef

F. Weng, C.Z. Chen, H.J. Yu, Research status of laser cladding on titanium and its alloys: a review. Mater. Des. 58, 412–425 (2014). https://doi.org/10.1016/j.matdes.2014.01.077CrossRef

M. Jones, A.J. Horlock, P.H. Shipway, D.G. McCartney, J.V. Wood, A comparison of the abrasive wear behavior of HVOF sprayed titanium carbide-and titanium boride-based cermet coatings. Wear 251(1–12), 1009–1016 (2001). https://doi.org/10.1016/S0043-1648(01)00702-5CrossRef

A. Zhecheva, W. Sha, S. Malinov, A. Long, Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods. Surf. Coat. Technol. 200(7), 2192–2207 (2005). https://doi.org/10.1016/j.surfcoat.2004.07.115CrossRef

B. Courant, J.J. Hantzpergue, L. Avril, S. Benayoun, Structure and hardness of titanium surfaces carburized by pulsed laser melting with graphite addition. J. Mater. Process. Technol. 160(3), 374–381 (2005). https://doi.org/10.1016/j.jmatprotec.2004.06.025CrossRef

F. Movassagh-Alanagh, A. Abdollah-Zadeh, M. Aliofkhazraei, M. Abedi, Improving the wear and corrosion resistance of Ti-6Al-4V alloy by deposition of TiSiN nanocomposite coating with pulsed-DC PACVD. Wear 390–391, 93–103 (2017). https://doi.org/10.1016/j.wear.2017.07.009CrossRef

E. Marin, R. Offoiach, M. Regis, S. Fusi, A. Lanzutti, L. Fedrizzi, Diffusive thermal treatments combined with PVD coatings for tribological protection of titanium alloys. Mater. Des. 89, 314–322 (2016). https://doi.org/10.1016/j.matdes.2015.10.011CrossRef

10.

P.L. Zhang, X.P. Liu, H. Yan, Phase composition, microstructure evolution and wear behavior of Ni–Mn–Si coatings on copper by laser cladding. Surf. Coat. Technol. 332, 504–510 (2017). https://doi.org/10.1016/j.surfcoat.2017.08.072CrossRef

11.

X.L. Lu, X.B. Liu, P.C. Yu, S.J. Qiao, Y.J. Zhai, M.D. Wang, Y. Chen, D. Xu, Synthesis and characterization of Ni60-hBN high temperature self-lubricating anti-wear composite coatings on Ti6Al4V alloy by laser cladding. Opt. Laser Technol. 78(5), 87–94 (2016). https://doi.org/10.1016/j.optlastec.2015.10.005CrossRef

12.

G.F. Sun, Y.K. Zhang, C.S. Liu, K.Y. Luo, X.Q. Tao, P. Li, Microstructure and wear resistance enhancement of cast steel rolls by laser surface alloying NiCr–CrC. Mater. Des. 31(6), 2737–2744 (2010). https://doi.org/10.1016/j.matdes.2010.01.021CrossRef

13.

G.Y. Wang, J.Z. Zhang, R.Y. Shu, S. Yang, High temperature wear resistance and thermal fatigue behavior of Stellite-6/WC coatings produced by laser cladding with Co-coated WC powder. Int. J. Refract. Met. Hard Mater. 81, 63–70 (2019). https://doi.org/10.1016/j.ijrmhm.2019.02.024CrossRef

14.

Lin YH, Yao JH, Lei YP, Fu HG, Wang L (2016) Microstructure and properties of TiB2–TiB reinforced titanium matrix composite coating by laser cladding. Opt. Lasers Eng. 86: 216–227. https://doi.org/10.1016/j.optlaseng.2016.06.013CrossRef

15.

J.X. Yang, Z.Y. Xiao, F. Yang, H. Chen, X.B. Wang, S.F. Zhou, Microstructure and magnetic properties of NiCrMoAl/WC coatings by laser cladding: effect of WC metallurgical behaviors. Surf. Coat. Technol. 350, 110–118 (2018). https://doi.org/10.1016/j.surfcoat.2018.07.021CrossRef

16.

G. Muvvala, D.P. Karmakar, A.K. Nath, Online assessment of TiC decomposition in laser cladding of metal matrix composite coating. Mater. Des. 121, 310–320 (2017). https://doi.org/10.1016/j.matdes.2017.02.061CrossRef

17.

A. Riquelme, M.D. Escalera-Rodriguez, P. Rodrigo, J. Rams, Role of laser cladding parameters in composite coating (Al–SiC) on aluminum alloy. J. Therm. Spray Technol. 25(6), 1177–1191 (2016). https://doi.org/10.1007/s11666-016-0431-7CrossRef

18.

X. Jiang, D.Q. Zhao, Y.X. Wang, W.S. Duan, L.P. Wang, Toward hard yet tough VC coating via modulating compressive stress and nanostructure to enhance its protective performance in seawater. Ceram. Int. 45(1), 1049–1057 (2019). https://doi.org/10.1016/j.ceramint.2018.09.284CrossRef

19.

S.R. Al-Sayed, A.A. Hussein, A.A. Nofal, S.I. Hassab Elnaby, H. Elgazzar, H.A. Sabour, Laser powder cladding of Ti-6Al-4V α/β alloy. Materials 10(10), 1178 (2017). https://doi.org/10.3390/ma10101178CrossRef

20.

K.M. Wang, D. Du, G. Liu, B.H. Chang, Y.X. Hong, Microstructure and properties of WC reinforced Ni-based composite coatings with Y₂O₃ addition on titanium alloy by laser cladding. Sci. Technol. Weld. Join. 24(5), 517–524 (2019). https://doi.org/10.1080/13621718.2019.1580441CrossRef

21.

S.Y. Xie, R.D. Li, T.C. Yuan, C. Chen, K.C. Zhou, B. Song, Y.S. Shi, Laser cladding assisted by friction stir processing for preparation of deformed crack-free Ni-Cr-Fe coating with nanostructure. Opt. Laser Technol. 99, 374–381 (2018). https://doi.org/10.1016/j.optlastec.2017.09.025CrossRef

22.

Z.K. Weng, A.H. Wang, X.H. Wu, Y.Y. Wang, Z.X. Yang, Wear resistance of diode laser-clad Ni/WC composite coatings at different temperatures. Surf. Coat. Technol. 304, 283–292 (2016). https://doi.org/10.1016/j.surfcoat.2016.06.081CrossRef

23.

H.B. Jiang, Y.Q. Liu, Y.L. Zhang, Y. Liu, X.Y. Fu, D.D. Han, Y.Y. Song, L.Q. Ren, H.B. Sun, Reed leaf-inspired graphene films with anisotropic super-hydrophobicity. ACS Appl. Mater. Interfaces. 10, 18416–18425 (2018). https://doi.org/10.1021/acsami.8b03738CrossRef

24.

A. Arjangpay, A. Darvizeh, M.Y. Tooski, Effects of structural characteristics of a bionic dragonfly wing on its low velocity impact resistance. J. Bionic Eng. 15(5), 859–871 (2018). https://doi.org/10.1007/s42235-018-0073-1CrossRef

25.

H. Zhang, S.H. Liu, H.P. Xiao, X. Zhang, Synthesis and tribological properties of bio-inspired nacre-like composites. Materials 11(9), 1563 (2018). https://doi.org/10.3390/ma11091563CrossRef

26.

Z.W. Han, H.L. Feng, W. Yin, S.C. Niu, J.Q. Zhang, D.B. Chen, An efficient bionic anti-erosion functional surface inspired by desert scorpion carapace. Tribol. Trans. 58(2), 357–364 (2015). https://doi.org/10.1080/10402004.2014.971996CrossRef

27.

K. Jones, S.R. Schmid, Experimental investigation of laser texturing and its effect on friction and lubrication. Procedia Manuf. 5, 568–577 (2016). https://doi.org/10.1016/j.promfg.2016.08.047CrossRef

28.

M. Cho, Friction and wear of a hybrid surface texturing of polyphenylene sulfide-filled micropores. Wear 346, 158–167 (2015). https://doi.org/10.1016/j.wear.2015.11.010CrossRef

29.

H.F. Zhang, P. Zhang, Q. Sui, K. Zhao, H. Zhou, L.Q. Ren, Influence of multiple bionic unit coupling on sliding wear of laser-processed gray cast iron. J. Mater. Eng. Perform. 26(4), 1614–1625 (2017). https://doi.org/10.1007/s11665-017-2600-3CrossRef

30.

Y.Q. Wang, B.T. Liu, Z.C. Guo, Wear resistance of machine tools’ bionic linear rolling guides by laser cladding. Opt. Laser Technol. 91, 55–62 (2017). https://doi.org/10.1016/j.optlastec.2016.12.015CrossRef

31.

C.Q. Qi, X.H. Zhan, Q.Y. Gao, L.J. Liu, Y.Z. Song, Y.P. Li, The influence of the pre-placed powder layers on the morphology, microscopic characteristics and microhardness of Ti-6Al-4V/WC MMC coatings during laser cladding. Opt. Laser Technol. 119, 105572 (2019). https://doi.org/10.1016/j.optlastec.2019.105572CrossRef

32.

S.R. Al-Sayed, A.A. Hussein, A. Nofal, S.I. Hassab Elnaby, H. Elgazzar, H. Elgazzar, A contribution to laser cladding of Ti-6Al-4V titanium alloy. Metall. Res. Technol 116, 634 (2017). https://doi.org/10.1051/metal/2019060CrossRef

33.

P.K. Farayibi, Microstructural evolution of metal matrix composites formed by laser deposition of Ti-6Al-4V wire and WC-W2C powder. Adv. Eng. Forum 26, 22–32 (2018). https://doi.org/10.4028/www.scientific.net/AEF.26.22CrossRef

34.

A. Ortiz, A. García, M. Cadenas, M.R. Fernández, J.M. Cuetos, WC particles distribution model in the cross-section of laser cladded NiCrBSi + WC coatings, for different wt.% WC. Surf. Coat. Technol. 324, 298–306 (2017). https://doi.org/10.1016/j.surfcoat.2017.05.086CrossRef

35.

Zhou Y, Wang SQ, Huang KZ, Zhang B, Wen GH, Cui XH (2017) Improvement of tribological performance of TC11 alloy via formation of a double-layer tribo-layer containing graphene/Fe₂O₃ nanocomposite. Tribol Int 109: 485–495. https://doi.org/10.1016/j.triboint.2017.01.025CrossRef

36.

Chen BB, Chen S, Yang J, Li HP (2015) Tribological properties of Cu-based composites with S-doped NbSe2. Rare Met. 34(6): 407–412. https://doi.org/10.1007/s12598-015-0464-yCrossRef

37.

X.P. Tao, S. Zhang, C.H. Zhang, C.L. Wu, J. Chen, A.O. Abdullah, Effect of Fe and Ni contents on microstructure and wear resistance of aluminum bronze coatings on 316 stainless steel by laser cladding. Surf. Coat. Technol. 342, 76–84 (2018). https://doi.org/10.1016/j.surfcoat.2018.02.032CrossRef

Titel: Wear Resistance of Different Bionic Structure Manufactured by Laser Cladding on Ti6Al4V
verfasst von: Mengyao Wu
Xiaohong Zhan
Hengchang Bu
Lijun Liu
Yuanzeng Song
Yaping Li
Publikationsdatum: 04.06.2020
Verlag: The Korean Institute of Metals and Materials
Erschienen in: Metals and Materials International / Ausgabe 7/2021
Print ISSN: 1598-9623
Elektronische ISSN: 2005-4149
DOI: https://doi.org/10.1007/s12540-020-00765-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphic Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2021

Evaluating Corrosion Resistance of Biomedical Ti-6Al-4 V Alloys Fabricated via Additive Manufacturing Using Electrochemical Critical Localized Corrosion Potential

Impurity Removal and Microstructural Analysis of Inconel 718 Refined by Hydrogen Plasma Arc Melting

Effect of Microstructure on High Cycle Fatigue and Fatigue Crack Propagation Behaviors of β-Annealed Ti–6Al–4V Alloy

Evaluation of Ballistic Limit Velocity Using Instrumented Indentation Test of 7xxx Aluminum Alloys After Friction Stir Welding

Fusion Weldabilities of Advanced High Manganese Steels: A Review

Microstructure, Texture Characteristics, Mechanical and Bio-Corrosion Properties of High Strain Rate Rolled Mg–Zn–Sr Alloys

Premium Partner

Marktübersichten