Determination of the distance of the fresh water–salt water interface extending into coastal confined aquifers

In a coastal zone an understanding of the distance of the fresh water–salt water interface and its extension inland is important for prevention of sea water intrusion. In this article estimating methods are described for calculating the distance of a fresh water–salt water interface in a coastal confined aquifer based on the submarine fresh groundwater discharge. This groundwater discharge is controlled not only by the aquifer properties and hydraulic head difference, but also by the position of the fresh water–salt water interface in the coastal zone. A homogeneous and isotropic coastal confined aquifer is considered and fresh groundwater flow in the confined aquifer is thought to be at a steady state. Two observation wells at different distances in a profile perpendicular to the coastline are required in calculation of the distance of the interface toe in the coastal zone. Four coastal confined aquifers with horizontal and sloping confining beds and with varying thickness are also considered. Reasonable results are obtained when examples are used to illustrate the application of the methods. The methods require hydraulic head data at the two wells and thickness of the confined aquifers, but the hydraulic conductivity and fresh groundwater flow rate of the confined aquifers are not needed.