Thermal decay of carbonate dimension stones: fabric, physical and mechanical changes

This paper deals with the effects of thermal stresses on selected carbonate rocks used as dimension stones. They are Mesozoic calcareous and dolomitic rocks cropping out in Apulia (southern Italy) that, for their physico-mechanical and aesthetic properties, have always been finding a large application both as ornamental stones and as simple construction materials; their use is attested not only in Italy, in works of archaeological, historical and artistic interest too. The cause–effect relationships of thermal degradation were studied by means of an artificial accelerated ageing test, in order to provide a perspective about the decay of carbonate stones due to diurnal and seasonal temperature fluctuations, as well as thermal shocks during events of fire development. The stone samples were subjected to thermal cycles in a muffle furnace, ranging from 100 to 700 °C; after each cycle, several non-destructive and semi-destructive tests were carried out: mass and volume measurements, mercury intrusion porosimetry, sclerometer tests, ultrasonic tests, thin-section observations and determination of chromatic alterations through image analysis and Munsell charts method. In this way, the qualitative and quantitative modifications induced in fabric, physical and mechanical properties were discussed. The results highlight the fundamental role of depositional and diagenetic fabric that, together with mineralogical composition, represents the most significant discriminating factor in the response of the stone to thermal stresses.