nach oben

Arabian Journal for Science and Engineering

Erschienen in:

16.11.2019 | Research Article - Chemistry

Effects of Cinnamaldehyde as an Eco-Friendly Corrosion Inhibitor on Mild Steel in Aerated NaCl Solutions

verfasst von: S. M. Zakir Hossain, S. A. Kareem, A. F. Alshater, H. Alzubair, S. A. Razzak, M. M. Hossain

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This article investigates the impact of cinnamaldehyde as an eco-friendly inhibitor in mitigating corrosion detriment on mild steel in aerated NaCl (3% w/w) using weight loss and potentiodynamic polarization methods. The results indicate moderate inhibition efficiency of cinnamaldehyde reaching around 70% at an optimum level of 0.5 g/L or 500 ppm by establishing an adsorption film on metal surface. Adsorption of the cinnamaldehyde seemed to adhere to the Langmuir isotherm. The corrosion rate decreased with cinnamaldehyde dose up to the optimum level while increased slowly with the medium temperature. The activation energy (E_a) achieved with cinnamaldehyde was found to be lower than that of without cinnamaldehyde. The polarization curves revealed that the inhibitor performs as a mixed-type inhibitor since it diminishes both anodic and cathodic current densities. The calculated inhibition efficiencies using both corrosion monitoring techniques were found to be in good agreement. Additionally, the mild steel surfaces (inhibited and uninhibited) were examined by using SEM–EDX analysis.

Vorheriger Artikel Graphene Oxides/Carbon Nanotubes–Hydroxyapatite Nanocomposites for Biomedical Applications

Nächster Artikel Synthesis, Characterization, Hydrolytic Degradation and Mathematical Modeling of Poly[bis(2(2-methoxyethoxyethoxy diethylamino)phosphazene]

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

DNV GL – Report No. OAPUS310GKOCH (PP110272)-1, Rev. 3 – www.dnvgl.com Page A-2 December 23, 2015 (http://impact.nace.org/documents/appendix-a.pdf) (n.d.)

Tian, W.; Du, N.; Li, S.; Chen, S.; Wu, Q.: Metastable pitting corrosion of 304 stainless steel in 3.5% NaCl solution. Corros. Sci. 85, 372–379 (2014). https://doi.org/10.1016/j.corsci.2014.04.033 CrossRef

Zhong, P.; Sun, M.; Xiao, K.; Hu, Y.B.; Li, X.G.; Dong, C.F.: Effects of solution pH and Cl − on electrochemical behaviour of an Aermet100 ultra-high strength steel in acidic environments. Corros. Sci. 53, 4159–4165 (2011). https://doi.org/10.1016/j.corsci.2011.08.024 CrossRef

Ghods, P.; Isgor, O.B.; McRae, G.A.; Cu, G.P.: Electrochemical investigation of chloride-induced depassivation of black steel rebar under simulated service conditions. Corros. Sci. 52, 1649–1659 (2010)CrossRef

Cicolin, D.; Trueba, M.; Trasatti, S.P.: Effect of chloride concentration, pH and dissolved oxygen, on the repassivation of 6082-T6 Al alloy. Electrochim. Acta 124, 27–35 (2014). https://doi.org/10.1016/j.electacta.2013.09.003 CrossRef

Zaid, B.; Saidi, D.; Benzaid, A.; Hadji, S.: Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy. Corros. Sci. 50, 1841–1847 (2008). https://doi.org/10.1016/j.corsci.2008.03.006 CrossRef

Mohammed, M.S.H.S.; Raghavan, R.S.; Knight, G.M.S.; Murugesan, V.: Macrocell corrosion studies of coated rebars. Arab. J. Sci. Eng. 39, 3535–3543 (2014). https://doi.org/10.1007/s13369-014-1006-x CrossRef

Cao, C.; Cheung, M.M.S.: Non-uniform rust expansion for chloride-induced pitting corrosion in RC structures. Constr. Build. Mater. 51, 75–81 (2014). https://doi.org/10.1016/j.conbuildmat.2013.10.042 CrossRef

Raja, V.S.; Padekar, B.S.: Role of chlorides on pitting and hydrogen embrittlement of Mg-Mn wrought alloy. Corros. Sci. 75, 176–183 (2013). https://doi.org/10.1016/j.corsci.2013.05.030 CrossRef

10.

Abd El-Haleem, S.M.; Abd El-Wanees, S.: Chloride induced pitting corrosion of nickel in alkaline solutions and its inhibition by organic amines. Mater. Chem. Phys. 128, 418–426 (2011). https://doi.org/10.1016/j.matchemphys.2011.03.023 CrossRef

11.

Klapper, H.S.; Goellner, J.; Burkert, A.; Heyn, A.: Environmental factors affecting pitting corrosion of type 304 stainless steel investigated by electrochemical noise measurements under potentiostatic control. Corros. Sci. 75, 239–247 (2013). https://doi.org/10.1016/j.corsci.2013.06.005 CrossRef

12.

Goyal, A.; Pouya, H.S.; Ganjian, E.; Claisse, P.: A review of corrosion and protection of steel in concrete. Arab. J. Sci. Eng. 43, 5035–5055 (2018). https://doi.org/10.1007/s13369-018-3303-2 CrossRef

13.

Alhumade, H.; Abdala, A.; Yu, A.; Elkamel, A.; Simon, L.: Corrosion inhibition of copper in sodium chloride solution using polyetherimide/graphene composites. Can. J. Chem. Eng. 94, 896–904 (2016). https://doi.org/10.1002/cjce.22439 CrossRef

14.

Duan, Z.; Sun, R.; Liu, R.; Zhu, C.: Accurate thermodynamic model for the calculation of H2S solubility in pure water and brines. Energy Fuels 21, 2056–2065 (2007). https://doi.org/10.1021/ef070040p CrossRef

15.

Duan, Z.; Sun, R.: An improved model calculating CO₂ solubility in pure water and aqueous NaCl solutions from 273 to 533 K and from 0 to 2000 bar. Chem. Geol. 193, 257–271 (2003)CrossRef

16.

Ating, E.I.; Umoren, S.A.; Udousoro, I.I.; Ebenso, E.E.; Udoh, A.P.: Leaves extract of ananas sativum as green corrosion inhibitor for aluminium in hydrochloric acid solutions. Green Chem. Lett. Rev. 3, 61–68 (2010). https://doi.org/10.1080/17518250903505253 CrossRef

17.

Abdel Hameed, R.S.: Ranitidine drugs as non-toxic corrosion inhibitors for mild steel in hydrochloric acid medium. Port. Electrochim. Acta. 29, 273–285 (2011). https://doi.org/10.4152/pea.201104273 CrossRef

18.

Ramezanzadeh, M.; Sanaei, Z.; Bahlakeh, G.; Ramezanzadeh, B.: Highly effective inhibition of mild steel corrosion in 3.5% NaCl solution by green Nettle leaves extract and synergistic effect of eco-friendly cerium nitrate additive: experimental, MD simulation and QM investigations. J. Mol. Liq. 256, 67–83 (2018). https://doi.org/10.1016/j.molliq.2018.02.021 CrossRef

19.

Shabani-Nooshabadi, M.; Hoseiny, F.S.; Jafari, Y.: Corrosion inhibition of copper by ephedra sarcocarpa plant extract as green corrosion inhibitor in strong acidic medium. Anal. Bioanal. Electrochem. 6, 341–354 (2014)

20.

Shabani-Nooshabadi, M.; Hoseiny, F.S.; Jafari, Y.: Green approach to corrosion inhibition of copper by the extract of calligonum comosum in strong acidic medium. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 46, 293–299 (2015). https://doi.org/10.1007/s11661-014-2634-1 CrossRef

21.

Shabani-Nooshabadi, M.; Ghandchi, M.S.: Santolina chamaecyparissus extract as a natural source inhibitor for 304 stainless steel corrosion in 3.5% NaCl. J. Ind. Eng. Chem. 31, 231–237 (2015). https://doi.org/10.1016/j.jiec.2015.06.028 CrossRef

22.

Lebrini, M.; Robert, F.; Roos, C.: Alkaloids extract from Palicourea guianensis plant as corrosion inhibitor for C38 steel in 1 M hydrochloric acid medium. Int. J. Electrochem. Sci. 6, 847–859 (2011)

23.

El Ouariachi, E.; Bouyanzer, A.; Salghi, R.; Hammouti, B.; Desjobert, J.M.; Costa, J.; Paolini, J.; Majidi, L.: Inhibition of corrosion of mild steel in 1 M HCl by the essential oil or solvent extracts of Ptychotis verticillata. Res. Chem. Intermed. 41, 935–946 (2015). https://doi.org/10.1007/s11164-013-1246-5 CrossRef

24.

Lahhit, N.; Bouyanzer, A.; Desjobert, J.-M.; Hammouti, B.; Salghi, R.; Costa, J.; Jama, C.; Bentiss, F.; Majidi, L.: Fennel (Foeniculum Vulgare) essential oil as green corrosion inhibitor of carbon steel in hydrochloric acid solution. Port. Electrochim. Acta. 29, 127–138 (2011). https://doi.org/10.4152/pea.201102127 CrossRef

25.

Halambek, J.; Berković, K.; Vorkapić-Furač, J.: Laurus nobilis L. oil as green corrosion inhibitor for aluminium and AA5754 aluminium alloy in 3% NaCl solution. Mater. Chem. Phys. 137, 788–795 (2013). https://doi.org/10.1016/j.matchemphys.2012.09.066 CrossRef

26.

Rieger, K.A.; Schiffman, J.D.: Electrospinning an essential oil: cinnamaldehyde enhances the antimicrobial efficacy of chitosan/poly(ethylene oxide) nanofibers. Carbohydr. Polym. 113, 561–568 (2014). https://doi.org/10.1016/j.carbpol.2014.06.075 CrossRef

27.

Growcock, F.B.; Frenier, W.W.: Kinetics of steel corrosion in hydrochloric acid inhibited with trans-cinnamaldehyde. J. Electrochem. Soc. 135, 817–823 (1988)CrossRef

28.

Cabello, G.; Funkhouser, G.P.; Cassidy, J.; Kiser, C.E.; Lane, J.; Cuesta, A.: CO and trans-cinnamaldehyde as corrosion inhibitors of I825, L80-13Cr and N80 alloys in concentrated HCl solutions at high pressure and temperature. Electrochim. Acta 97, 1–9 (2013). https://doi.org/10.1016/j.electacta.2013.03.011 CrossRef

29.

Keleş, H.; Keleş, M.: Electrochemical investigation of a schiff base synthesized by cinnamaldehyde as corrosion inhibitor on mild steel in acidic medium. Res. Chem. Intermed. 40, 193–209 (2014). https://doi.org/10.1007/s11164-012-0955-5 CrossRef

30.

Negm, A.N.; Yousef, A.M.; Tawfik, M.S.: Impact of synthesized and natural compounds in corrosion inhibition of carbon steel and aluminium in acidic media. Recent Patents Corros. Sci. 3, 58–68 (2013)CrossRef

31.

Solmaz, R.: Investigation of the inhibition effect of 5-((E)-4-phenylbuta-1,3-dienylideneamino)-1,3,4-thiadiazole-2-thiol Schiff base on mild steel corrosion in hydrochloric acid. Corros. Sci. 52, 3321–3330 (2010). https://doi.org/10.1016/j.corsci.2010.06.001 CrossRef

32.

Jafferji, H.; Sharifi, N.P.; Schneider, E.M.; Sakulic, A.R.: Investigation of incorporating cinnamaldehyde into Lightweight Aggregate for potential corrosion reduction in cementitious materials. Cement Concr. Compos. 87, 1–9 (2018)CrossRef

33.

Jafferji, H.; Sakulich, A.R.; Schiffman, J.D.: Preliminary study on mitigating steel reinforcement corrosion with bioactive agent. Cement Concr. Compos. 69, 9–17 (2016)CrossRef

34.

Hossain, S.M.Z.; Al-Shater, A.; Kareem, S.A.R.: Cinnamaldehyde as a green inhibitor in mitigating AISI 1015 carbon steel corrosion in HCl. Arab J Sci Eng 44, 5489–5499 (2019)CrossRef

35.

Rekkab, S.; Zarrok, H.; Salghi, R.; Zarrouk, A.; Bazzi, L.; Hammouti, B.; Kabouche, Z.; Touzani, R.; Zougagh, M.: Green corrosion inhibitor from essential oil of eucalyptus globulus (Myrtaceae) for C38 steel in sulfuric acid solution. J. Mater. Environ. Sci. 3, 613–627 (2012)

36.

Emregül, K.C.; Abdülkadir Akay, A.; Atakol, O.: The corrosion inhibition of steel with Schiff base compounds in 2 M HCl. Mater. Chem. Phys. 93, 325–329 (2005). https://doi.org/10.1016/j.matchemphys.2005.03.008 CrossRef

37.

Messaadia, L.; Id El mouden, O.; Anejjar, A.; Messali, M.; Salghi, R.; Benali, O.; Cherkaoui, O.; Lallam, A.: Adsorption and corrosion inhibition of new synthesized pyridazinium-based ionic liquid on carbon steel in 05 M H2SO4. J. Mater. Environ. Sci. 6, 598–606 (2015)

38.

De Souza, F.S.; Gonçalves, R.S.; Spinelli, A.: Assessment of caffeine adsorption onto mild steel surface as an eco-friendly corrosion inhibitor. J. Braz. Chem. Soc. 25, 81–90 (2014). https://doi.org/10.5935/0103-5053.20130270 CrossRef

39.

Cristofari, G.; Znini, M.; Majidi, L.; Bouyanzer, A.; Al-Deyab, S.S.; Paolini, J.; Hammouti, B.; Costa, J.: Chemical composition and anti-corrosive activity of Pulicaria mauritanica essential oil against the corrosion of mild steel in 0.5 M H 2SO 4. Int. J. Electrochem. Sci. 6, 6699–6717 (2011)

40.

41.

Jafferji, H.; Sakulich, A.R.; Schiffman, J.D.: Preliminary study on mitigating steel reinforcement corrosion with bioactive agent. Cem. Concr. Compos. 69, 9–17 (2016). https://doi.org/10.1016/j.cemconcomp.2016.02.011 CrossRef

42.

Zucchi, F.; Trabanelli, G.; Brunoro, G.: Iron corrosion inhibition in hot 4 M HCl solution by t-cinnamaldehyde and its structure-related compounds. Corros. Sci. 36, 1683–1690 (1994). https://doi.org/10.1016/0010-938X(94)90123-6 CrossRef

43.

Manssouri, M.; El Ouadi, Y.; Znini, M.; Costa, J.; Bouyanzer, A.; Desjobert, J.M.; Majidi, L.: Adsorption proprieties and inhibition of mild steel corrosion in HCl solution by the essential oil from fruit of Moroccan Ammodaucus leucotrichus. J. Mater. Environ. Sci. 6, 631–646 (2015)

44.

Reaction Rates. Retrieved from Tutorvista.com: http://chemistry.tutorvista.com/physical-chemistry/reaction-rates.html#activation-energy (n.d.)

45.

Awad, M.I.: Eco friendly corrosion inhibitors: inhibitive action of quinine for corrosion of low carbon steel in 1 M HCl. J. Appl. Electrochem. 36, 1163–1168 (2006). https://doi.org/10.1007/s10800-006-9204-1 CrossRef

46.

Guan, N.M.; Xueming, L.; Fei, L.: Synergistic inhibition between o-phenanthroline and chloride ion on cold rolled steel corrosion in phosphoric acid. Mater. Chem. Phys. 86, 59–68 (2004)CrossRef

47.

Noor, E.A.; Al-Moubaraki, A.H.: Thermodynamic study of metal corrosion and inhibitor adsorption processes in mild steel/1-methyl-4[4′(-X)-styryl pyridinium iodides/hydrochloric acid systems. Mater. Chem. Phys. 110, 145–154 (2008). https://doi.org/10.1016/j.matchemphys.2008.01.028 CrossRef

48.

Sankarapapavinasam, S.; Ahmed, M.F.: Benzenethiols as inhibitors for the corrosion of copper. J. Appl. Electrochem. 22, 390–395 (1992). https://doi.org/10.1007/BF01092694 CrossRef

49.

Andreani, S.; Znini, M.; Paolini, J.; Majidi, L.; Hammouti, B.; Costa, J.; Muselli, A.: Study of corrosion inhibition for mild steel in hydrochloric acid solution by Limbarda crithmoides (L.) essential oil of Corsica. J. Mater. Environ. Sci. 7, 187–195 (2016)

50.

Eduok, U.M.; Khaled, M.: Corrosion inhibition for low-carbon steel in 1 MH 2 SO 4 solution by phenytoin: evaluation of the inhibition potency of another “anticorrosive drug”. Res. Chem. Intermed. 41(9), 6309–6324 (2015)CrossRef

51.

Umoren, S.A.; Eduok, U.M.; Israel, A.U.; Obot, I.B.; Solomon, M.M.: Coconut coir dust extract: a novel eco-friendly corrosion inhibitor for Al in HCl solutions. Green Chem. Lett. Rev. 5, 303–313 (2012). https://doi.org/10.1080/17518253.2011.625980 CrossRef

52.

Singh, A.; Ansari, K.R.; Quraishi, M.A.; Lgaz, H.: Effect of electron donating functional groups on corrosion inhibition of J55 steel in a sweet corrosive environment: experimental, density functional theory, and molecular dynamic simulation. Materials (Basel). 12, (2018). https://doi.org/10.3390/ma12010017 CrossRef

53.

Cheng, S.; Chen, S.; Liu, T.; Chang, X.; Yin, Y.: Carboxymenthylchitosan as an ecofriendly inhibitor for mild steel in 1 M HCl. Mater. Lett. 61, 3276–3280 (2007). https://doi.org/10.1016/j.matlet.2006.11.102 CrossRef

Titel: Effects of Cinnamaldehyde as an Eco-Friendly Corrosion Inhibitor on Mild Steel in Aerated NaCl Solutions
verfasst von: S. M. Zakir Hossain
S. A. Kareem
A. F. Alshater
H. Alzubair
S. A. Razzak
M. M. Hossain
Publikationsdatum: 16.11.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 1/2020
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-019-04236-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2020

Understanding the Influence of Electron-Donating and Electron-Withdrawing Substituents on the Anticorrosive Properties of Imidazole: A Quantum-Chemical Approach

Enhancement of Clay–Sand Liners Using Crushed Limestone Powder for Better Fluid Control

Chemical Fingerprinting, Anticancer, Anti-inflammatory and Free Radical Scavenging Properties of Calamintha fenzlii Vis. Volatile Oil from Palestine

Development and Characterization of Novel Bigel-Based 1,4-Naphthoquinones for Topical Application with Antioxidant Potential

Optimization of Ceramic Tile Properties from Three Malaysian Clays via Statistical Mixture Design

Synthesis, Characterization, Hydrolytic Degradation and Mathematical Modeling of Poly[bis(2(2-methoxyethoxyethoxy diethylamino)phosphazene]

Premium Partner

Marktübersichten