nach oben

Arabian Journal for Science and Engineering

Erschienen in:

01.06.2020 | Research Article-Mechanical Engineering

Investigation on Drilling Behavior of CFRP Composites Using Optimization Technique

verfasst von: D. Raj Kumar, N. Jeyaprakash, Che-Hua Yang, K. R. Ramkumar

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 11/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Carbon fiber-reinforced polymers (CFRPs) have been applied to various fields such as electronic printed circuit boards, aircraft brakes, automobile forks, and machine tool-damped structures due to their low density and high tensile strength. These application components required micro-hole and macro-hole in it for joining. In this research work, a comparison of the experimental investigation on micro- and macro-drill on CFRP using a vertical machining center has been carried out. The input machining control factors were spindle speed and rate of feed, whereas the quality characteristics of drilling CFRP were considered as thrust force, delamination, and overcut. Analysis of variance (ANOVA) and gray relational analysis were employed to identify the most significant factor and optimum process parameters, respectively. Microstructural defects of micro-hole and macro-hole were studied using scanning electron microscopy. Results showed that the rate of feed linearly affected the thrust force and delamination and is inversely proportional to overcut.

Vorheriger Artikel Parallelization of Numerical Conjugate Heat Transfer Analysis in Parallel Plate Channel Using OpenMP

Nächster Artikel Investigation on the Oxidation Behavior of Dual-Phase Silicon-Containing Steel at Different Beginning Oxidation Temperatures

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Raj, D.S.; Karunamoorthy, L.: Study of the effect of tool wear on hole quality in drilling CFRP to select a suitable drill for multi-criteria hole quality. Mater. Manuf. Process. 31, 587–592 (2015). https://doi.org/10.1080/10426914.2015.1004713CrossRef

Tan, C.L.; Azmi, A.I.; Muhammad, N.: Delamination and surface roughness analyses in drilling hybrid carbon/glass composite. Mater. Manuf. Process. 31, 1366–1376 (2016). https://doi.org/10.1080/10426914.2015.1103864CrossRef

Krishnaraj, V.; Prabukarthi, A.; Ramanathan, A.; Elanghovan, N.; Senthil Kumar, M.; Zitoune, R.; Davim, J.P.: Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates. Compos. Part B Eng. 43, 1791–1799 (2012). https://doi.org/10.1016/j.compositesb.2012.01.007CrossRef

Eneyew, E.D.; Ramulu, M.: Experimental study of surface quality and damage when drilling unidirectional CFRP composites. J. Mater. Res. Technol. 3, 354–362 (2014). https://doi.org/10.1016/j.jmrt.2014.10.003CrossRef

Du, J.; Zhang, H.; Geng, Y.; Ming, W.; He, W.; Ma, J.; Cao, Y.; Li, X.; Liu, K.: A review on machining of carbon fiber reinforced ceramic matrix composites. Ceram. Int. 45, 18155–18166 (2019). https://doi.org/10.1016/j.ceramint.2019.06.112CrossRef

Daxi, G.; Yunda, T.; Yihang, L.; Zhenyu, S.; Xinggang, J.; Deyuan, Z.: Experimental study on drilling load and hole quality during rotary ultrasonic helical machining of small-diameter CFRP holes. J Mater. Process. Technol. 270, 195–205 (2019). https://doi.org/10.1016/j.jmatprotec.2019.03.001CrossRef

John, K.M.; Thirumalai Kumaran, S.; Rendi, K.; Park, Ki M.; Byeon, J.H.: Review on the methodologies adopted to minimize the material damages in drilling of carbon fiber reinforced plastic composites. J Reinf. Plast. Compos. 38, 351–368 (2019). https://doi.org/10.1177/0731684418819822CrossRef

Panchagnula, K.K.; Palaniyandi, K.: Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review. J. Mater. Res. Technol. 7, 180–189 (2018). https://doi.org/10.1016/j.jmrt.2017.06.003CrossRef

Samuel Raj, D.; Karunamoorthy, L.: Performance of cryogenically treated WC drill using tool wear measurements on the cutting edge and hole surface topography when drilling CFRP. Int. J. Refract. Met. Hard Mater. 78, 32–44 (2019). https://doi.org/10.1016/j.ijrmhm.2018.08.011CrossRef

10.

Mannoj Rajkumar, G.; Bhardwaj, D.; Kannan, C.; Oyyaravelu, R.; Balan, A.S.S.: Effect of chilled air on delamination, induced vibration, burr formation and surface roughness in CFRP drilling: a comparative study. Mater. Res. Express (2018). https://doi.org/10.1088/2053-1591/aaf47dCrossRef

11.

Durante, M.; Boccarusso, L.; De Fazio, D.; Langella, A.: Circular cutting strategy for drilling of carbon fiber-reinforced plastics (CFRPs). Mater. Manuf. Process. 34, 554–5661 (2019). https://doi.org/10.1080/10426914.2019.1566615CrossRef

12.

Mudhukrishnan, M.; Hariharan, P.; Palanikumar, K.; Latha, B.: Optimization and sensitivity analysis of drilling parameters for sustainable machining of carbon fiber-reinforced polypropylene composites. J. Thermoplast. 32, 1485–1508 (2018). https://doi.org/10.1177/0892705718799816CrossRef

13.

Qiu, X.; Li, P.; Niu, Q.; Chen, A.; Ouyang, P.; Li, C.; Jo, K.T.: Influence of machining parameters and tool structure on cutting force and hole wall damage in drilling CFRP with stepped drills. Int. J. Adv. Manuf. Technol. 97, 857–865 (2018). https://doi.org/10.1007/s00170-018-1981-2CrossRef

14.

Zitoune, R.; Krishnaraj, V.; Collombet, F.: Study of drilling of composite material and aluminium stack. Compos. Struct. 92, 1246–1255 (2010). https://doi.org/10.1016/j.compstruct.2009.10.010CrossRef

15.

Heisel, U.; Pfeifroth, T.: Influence of point angle on drill hole quality and machining forces when drilling CFRP. AIP Proc. CIRP 1, 471–476 (2012). https://doi.org/10.1016/j.procir.2012.04.084CrossRef

16.

Raj Kumar, D.; Ranjithkumar, P.; Jenarthanan, M.P.; Sathiyanarayanan, C.: Experimental investigation and analysis of factors influencing delamination and thrust force during drilling of carbon-fibre reinforced polymer composites. Pigment Resin Technol. 46(6), 507–524 (2017)CrossRef

17.

Karnik, S.R.; Gaitonde, V.N.; Rubio, J.C.; Correia, A.E.: Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model. Mater. Des. 29, 1768–1776 (2008). https://doi.org/10.1016/j.matdes.2008.03.014CrossRef

18.

Abish, J.; Samal, P.; Narenther, M.S.; Kannan, C.; Balan, A.S.S.: Assessment of drilling-induced damage in CFRP under chilled air environment. Mater. Manuf. Process. 33, 1361–1368 (2018). https://doi.org/10.1080/10426914.2017.1415452CrossRef

19.

Ravi Shankar, A.; Karali, P.: Cutting force and hole quality analysis in micro-drilling of CFRP. Mater. Maunf. Process. 33, 1369–1377 (2018). https://doi.org/10.1080/10426914.2017.1401715CrossRef

20.

Velayudham, A.; Krishnamurthy, R.: Effect of point geometry and their influence on thrust and delamination in drilling of polymeric composites. J. Mater. Process. Technol. 185, 204–209 (2007). https://doi.org/10.1016/j.jmatprotec.2006.03.146CrossRef

21.

Liu, L.; Qi, C.; Wu, F.; Xu, J.; Zhu, X.: Experimental thrust forces and delamination analysis of GFRP laminates using candlestick drills. Mater. Manuf. Process. 33, 695–708 (2018). https://doi.org/10.1080/10426914.2017.1376072CrossRef

22.

Anwar, S.; Nasr, M.M.; Pervaiz, S.; Al-Ahmari, A.; Alkahtani, M.; El-Tamimi, A.: A study on the effect of main process parameters of rotary ultrasonic machining for drilling BK7 glass. Adv. Mech. Eng. (2018). https://doi.org/10.1177/1687814017752212CrossRef

Titel: Investigation on Drilling Behavior of CFRP Composites Using Optimization Technique
verfasst von: D. Raj Kumar
N. Jeyaprakash
Che-Hua Yang
K. R. Ramkumar
Publikationsdatum: 01.06.2020
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 11/2020
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-020-04649-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2020

Microstructure Characterization and Performance Evaluation on AA7075 Metal Matrix Composites Using RSM Technique

Performance Improvement in a Helical Savonius Wind Rotor

Prediction of Wear Characteristics of AA2219-Gr Matrix Composites Using GRNN and Taguchi-Based Approach

Novel Physical Insights into the Thermodynamic Irreversibilities Within Dissipative EMHD Fluid Flows Past over a Moving Horizontal Riga Plate in the Coexistence of Wall Suction and Joule Heating Effects: A Comprehensive Numerical Investigation

Investigations of Strain Rate Effects on the Mechanical Properties of Hybrid Composite Laminate Under Varying Temperatures

Springback Behavior of Fiber Metal Laminates with Carbon Fiber-Reinforced Core in V-Bending Process

Premium Partner

Marktübersichten