nach oben

Russian Journal of Nondestructive Testing

Erschienen in:

01.11.2021 | ACOUSTIC METHODS

Study on the Relationship between Bolt Anchoring Defects and Complexity of Nondestructive Testing Signal

verfasst von: Lei Zhang, Zhimin Huang, Long Bai, Zhanguo Ma, Lun Zhang

Erschienen in: Russian Journal of Nondestructive Testing | Ausgabe 11/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Abstract—We combine the empirical mode decomposition (EMD) method with the multiscale entropy (MSE) method to quantify the number of internal defects in the bolt anchoring system so as to ensure the safety and reliability of the bolt anchoring structure. An experimental system for nondestructive testing (NDT) of anchoring quality is designed and manufactured by ourselves. On this system, the stress wave reflection method is used for NDT of the anchoring system in two kinds of conditions, with some or without defects. The EMD method is used to eliminate the high frequency components and trend terms in the detected signal, and then the MSE method is used to characterize the complexity of the reconstructed signal. The results show that the complexity of NDT signal of anchoring system with defects is higher than that of NDT signal of anchoring system without defects. And there is a clear corresponding relationship between the complexity of NDT signal and the number of defects. Moreover, an application example of this method in on-site NDT signal analysis of bolt anchoring system in coal mine is presented, which demonstrates the feasibility of this method in engineering application. It provides an effective way for quantitative evaluation of anchoring quality.

Vorheriger Artikel Delamination Defects Localization Using a New Time Frequency Algorithm Based on S-Transform for Ultrasonic Testing of Wind Turbine Blades Composite Materials

Nächster Artikel Technique for Analyzing Volumetric Defects Using Digital Elevation Model of a Surface

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Cao Yu and Zhang Tingyi, Detection of bolt bonding quality and its application, Chin. J. Eng. Geophys., 2008, vol. 5, no. 6, pp. 751–755.

Kang Hongpu, Sixty years development and prospects of rock bolting technology for underground coal mine roadways in China, J. Chin. Univ. Min. Technol., 2016, vol. 45, no. 6, pp. 1071–1081.

Kang Hongpu, Support technologies for deep and complex roadways in underground coal mines: A review, Int. J. Coal Sci. Technol., 2014, vol. 1, no. 3, pp. 261–277.CrossRef

Wang Mingwu, Wang Heling, Luo Guoyu, and Xie Yan, Research on non-destructive test of anchoring quality of rock bolts, J. Eng. Geol., 1999, vol. 7, no. 1, pp. 72–76.

Hou Chaojiong, Key theory and technique of coal entry bolt supporting, Ground Pressure and Strata Control, 2002, vol. 19, no. 1, pp. 2–5.

Hou Chaojiong and Gou Panfeng, Mechanism study on strength enhancement for the rocks surrounding roadway supported by bolt, Chin. J. Rock Mech. Eng., 2000, vol. 19, no. 3, pp. 42–45.

Kang Hongpu, Jiang Tieming, and Gao Fuqiang, Effect of pretensioned stress to rock bolting, J. Chin. Coal Soc., 2007, vol. 32, no. 7, pp. 680–685.

Jiang Jie, A Study on Nondestructive Detection of Stress Wave in Anchorage Bolts and Evaluation of Anchorage System Quality, Wuhan: Wuhan Univ. Technol., 2005.

Xiao Yangyi, Research on Stress Wave Nondestructive Testing Technology for Bolt Anchoring Quality, Huainan: Anhui Univ. Sci. & Technol., 2009.

10.

Xue Daocheng, Research on Bolting Quality Non-Destructive Testing Technology and Its Application in Xishan Mining Area, Xuzhou: China Univ. Min. Technol., 2013.

11.

Wang Meng, Experiment Research on Stress Wave Nondestructive Testing Technology for Bolt Anchorage Quality, Shanxi: Taiyuan Univ. Technol., 2012.

12.

Costa, M., Goldberger, A.L., and Peng, C.K., Multiscale entropy analysis of biological signals, Phys. Rev. E, 2005, no. 71, p. 21906. https://doi.org/10.1103/physreve.71.021906

13.

Costa, M., Goldberger, A.L., and Peng, C.K., Multiscale entropy analysis of complex physiologic time series, Phys. Rev. Lett., 2002, vol. 89, no. 6, pp. 705–708. https://doi.org/10.1103/physrevlett.89.068102CrossRef

14.

Zou Xiaohong, Zhang Yibo, and Sun Yanzhen, A method for extraction of motor imagery EEG features based on local mean decomposition and multiscale entropy, Chin. High Technol. Lett., 2018, no. 1, pp. 22–28.

15.

Chen Chunxiao, Li Jian, and Lu Xiong, Multiscale entropy-based analysis and processing of EEG signal during watching 3DTV, Measurement, 2018, no. 125, pp. 432–437. https://doi.org/10.1016/j.measurement.2018.05.017

16.

Bisi, M.C. and Stagni, R., Changes of human movement complexity during maturation: Quantitative assessment using multiscale entropy, Comp. Methods Biomech. Biomed. Eng., 2018, vol. 21, no. 4, pp. 1–7. https://doi.org/10.1080/10255842.2018.1448392CrossRef

17.

Zheng Jinde, Cheng Junsheng, and Hu Siyu, Rotor fault diagnosis based on multiscale entropy, J. Vibrat. Meas. Diagn., 2013, vol. 33, no. 2, pp. 294–297,

18.

Zhang Long, Zhang Lei, Xiong Guoliang, Huang Wenyi, and Zhou Jihui, Rolling bearing diagnosis based on multiscale entropy and neural network, Mach. Design Res., 2014, vol. 30, no. 5, pp. 96–98.

19.

Zheng Jinde, Cheng Junsheng, and Yang Yu, A rolling bearing fault diagnosis approach based on multiscale entropy, J. Hunan Univ. (Natural Sci.), 2012, vol. 39, no. 5, pp. 38–41.

20.

Jiang Zhanwei, Zheng Jinde, Pan Haiyang, and Pan Ziwei, Fault diagnosis of rolling bearings based on improved multiscale entropy and VPMCD, Noise Vibrat. Control, 2017, vol. 37, no. 3, pp. 156–161.

21.

Ye Xudan, Qi Xiaoli, Wang Zhenya, and Zheng Jinde, Rolling bearing fault diagnosis method based on variational mode decomposition and multiscale entropy, J. Changchun Univ. Sci. Technol. (Natural Sci. Ed.), 2017, vol. 40, no. 3, pp. 59–63.

22.

Dou Longjiang, Wan Shuting, and Zhan Changgeng, Application of multiscale entropy in mechanical fault diagnosis of high voltage circuit breaker, Entropy, 2018, vol. 20, no. 5, p. 325. https://doi.org/10.3390/e20050325CrossRef

23.

Pincus, S.M., Approximate entropy as a measure of system complexity, Proc. National Acad. Sci. USA, 1991, vol. 88, no. 6, pp. 2297–2301. https://doi.org/10.1073/pnas.88.6.2297CrossRef

24.

Zhang Lei, Investigation on Principle and Method of the Nondestructive Testing of Anchorage Defects in Partial-Cohesive Bolts, Xuzhou: China Univ. Min. Technol., 2016.

25.

Yang Yingtao, Study on Measure Parameters for Vibration Testing Based on Partially Grouted Metal Bolt, Jiaozuo: Henan Polytech. Univ., 2010.

26.

Huang, N.E., Shen, Z., Long, S.R., Wu, M.C., Shih, H.H., and Zheng, Q., The empirical mode decomposition and the hilbert spectrum for nonlinear and non-stationary time series analysis, Proc. Royal Soc. A Math. Phys. Eng. Sci., 1998, vol. 454, no. 1971, pp. 903–995. https://doi.org/10.1098/rspa.1998.0193

27.

Liu Shen, Zhang Xiaoji, Niu Yilong, and Wang Pingping, Feature extraction and classification experiment of underwater acoustic signals based on energy spectrum of IMF’s, Comp. Eng. Appl., 2012, vol. 50, no. 3, pp. 203–206,

28.

Li Ying and Pan Dongzi, Application of empirical mode decomposition (EMD) for nondestructive detection in bolt anchorage system, Coal Technol., 2012, vol. 31, no. 8, pp. 202–204.

29.

Cheng Junsheng, Yu Dejie, and Yang Yu, Application of EMD to local rub-impact fault diagnosis in rotor systems, J. Vibrat. Meas. Diagn., 2006, vol. 26, no. 1, pp. 24–27.

30.

Chen Wei, Ma Xiaohui, Ma Qinglin, and Wen Jiajie, Denoising method of Φ-OTDR system based on EMD-PCC, IEEE Sens. J., 2020, vol. 21, no. 10, pp. 12113–12118. https://doi.org/10.1109/JSEN.2020.3033674CrossRef

31.

Ashok, R.J., Singampalli, R.S., and Manikumar, R., Application of EMD based statistical parameters for the prediction of fault severity in a spur gear through vibration signals, Adv. Mater. Proces. Technol., 2021, no. 4, pp. 1–19. https://doi.org/10.1080/2374068X.2021.1888499

32.

Babiker, A. and Faye, I., A hybrid EMD-wavelet EEG feature extraction method for the classification of students' interest in the mathematics classroom, Comput. Intell. Neurosci., 2021, vol. 2021, no. 4, pp. 1–8. https://doi.org/10.1155/2021/6617462CrossRef

33.

Zheng Hua, Wu Zhenglong, Duan Shiqiang, and Zhou Jiangtao, Research on feature extracted method for flutter test based on EMD and CNN, Int. J. Aerospace Eng., 2021, vol. 2021, no. 5, pp. 1–10. https://doi.org/10.1155/2021/6620368CrossRef

34.

Wu Jing, Wu Li, Sun Miao, Lu Yani, and Han Yanhua, Application of boundary local feature scale adaptive matching extension EMD endpoint effect suppression method in blasting seismic wave signal processing, Shock Vibrat., 2021, vol. 2021, no. 5, pp. 1–9. https://doi.org/10.1155/2021/2804539CrossRef

35.

Li Zhangming, Lian Jijian, Wang Shengmin, and Cao Haibin, BP neural network model for rock bolt nondestructive detection based on fractal dimension, J. Tianjin Univ., 2008, vol. 41, no. 9, pp. 1120–1123.

36.

Li Zhihui, Li Liang, and LI Jiansheng, A research on stress wave nondestructive testing technology for anchor bolt, Sci. Surv. Mapp., 2009, vol. 34, no. 1, pp. 205–206.

Titel: Study on the Relationship between Bolt Anchoring Defects and Complexity of Nondestructive Testing Signal
verfasst von: Lei Zhang
Zhimin Huang
Long Bai
Zhanguo Ma
Lun Zhang
Publikationsdatum: 01.11.2021
Verlag: Pleiades Publishing
Erschienen in: Russian Journal of Nondestructive Testing / Ausgabe 11/2021
Print ISSN: 1061-8309
Elektronische ISSN: 1608-3385
DOI: https://doi.org/10.1134/S1061830921110127

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2021

Determining Geometric-Acoustic Properties of a Weld as a Solution to the Inverse Coefficient Problem for a Scalar Wave Equation

Infrared Image Segmentation Algorithm Based on Multi Structure Morphology—Pulse Coupled Neural Network in Application to the Inspection of Aerospace Materials

Enhanced Subsurface Analysis Using Proper Orthogonal Decomposition in Nonstationary Thermal Wave Imaging

Technique for Analyzing Volumetric Defects Using Digital Elevation Model of a Surface

Developing a Method for Ultrasonic Quality Control of Plastic Products Obtained by Rotary Moulding Method

Study on Ultrasonic Propagation Path in Nonuniform Temperature Field

Premium Partner

Marktübersichten