Anzeige
Erschienen in:
01.04.2021
Features of Setting Boundary Conditions in Problems of Modeling Turbulent Gas Motion in Turning-and-Expanding Flow for \(k{-}\varepsilon\) Turbulence Model and Reynolds Stress Transfer Model
Erschienen in: Journal of Engineering Thermophysics | Ausgabe 2/2021
EinloggenAktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.
Wählen Sie Textabschnitte aus um mit Künstlicher Intelligenz passenden Patente zu finden. powered by
Markieren Sie Textabschnitte, um KI-gestützt weitere passende Inhalte zu finden. powered by
Abstract
The paper substantiates selection of boundary conditions for correct modeling of gas motion in a turning-and-expanding flow. The choice is based on comparison of calculation results and experimental data. Measurements of average and pulsation values of flow velocity were carried out by the method of laser Doppler anemometry. The numerical modelling was performed on the basis of known modern turbulence models: \(k\)-\(\varepsilon\) model and Reynolds stress transfer model. A comparative analysis of the models was done. The comparison was made for the surfaces of the axial velocity component in a cross section. The data obtained can be useful for determination of the limits of applicability of various turbulence models and for verifying CFD codes.