nach oben

Steel in Translation

Erschienen in:

01.02.2022

The Influence of Internal Factor on Crack Resistance of Shell Mold for Investment Models

verfasst von: V. I. Odinokov, A. I. Evstigneev, E. A. Dmitriev, D. V. Chernyshova, A. A. Evstigneeva

Erschienen in: Steel in Translation | Ausgabe 2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract—

The evolution of stress–strain state (SSS) of multilayer shell mold (SM) has been simulated upon variation of properties between the layers during cooling of casted steel. A mathematical model has been developed and the stress state of SM has been theoretically investigated in the case of absence of interrelation between the layers in multilayer composite material. The complex three-component system (liquid metal, solid metal, ceramic shell mold) has been analyzed. The solid metal and the SM are considered as isotropic. In order to solve the formulated problem, the theory of small elastic deformations and the equations of heat conductance have been applied as well as verified numerical methods. The SSS evolution in shell molds can be traced by time steps. The thickness of solidified metal is determined by the equation of interphase transition. Heating of axisymmetric SM during pouring of liquid metal is analyzed. The stress state has been estimated by stresses and displacements occurring in SM. During cooling of liquid metal at the contact between the shell mold and supporting filler (SF), the surface between them can be detached. In this case, the contact problem is solved. The calculations for the case of complete sliding of layers have been carried out with consideration of the compiled algorithm for problem solving by using the developed numerical schemes and software. The obtained numerical results are presented in the form of diagrams and plots. The obtained results have been analyzed in detail. The inconsistency of the previously proposed concept about applicability of sliding between the layers in multilayer composite material in terms of its strain state has been demonstrated. The experimental results can be useful for analysis of other functional multilayer shell systems.

Vorheriger Artikel Redistribution of Carbon Atoms in Rails at Ultra-Long Operation

Nächster Artikel Capacity Calculations of the Crasher with Stops on a Roll

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Odinokov, V.I., Dmitriev, E.A., Evstigneev, A.I., and Sviridov, A.V., Matematicheskoe modelirovanie protsessov polucheniya otlivok v keramicheskie obolochkovye formy (Mathematical Modeling of Castings Obtaining in Ceramic Shell Molds), Moscow: Innovatsionnoe Mshinostroenie, 2020.

Odinokov, V.I., Dmitriev, E.A., Evstigneev, A.I., Sviridov, A.V., and Ivankova, E.P., Modeling and optimizing the property choices of materials and structures of shell molds for investment casting, Steel Transl., 2020, vol. 50, pp. 684–695. https://doi.org/10.3103/S0967091220100071CrossRef

Repyakh, S.I., Tekhnologicheskie osnovy lit’ya po vyplavlyaemym modelyam (Technological Basics of Casting by Investment Models). Dnepropetrovsk: Lira, 2006.

Evstigneev, A.I., Odinokov, V.I., Dmitriev, E.A., Sviridov, A.V., and Ivankova, E.P., Influence of external thermal action on stress state of shell molds by smelting molds, Math. Models Comput. Simul., 2021, vol. 13, no. 5, pp. 780–789. https://doi.org/10.1134/S2070048221050112CrossRef

Kulikov, G.M., Influence of anisotropy on the stress state of multilayer reinforced shells, Soviet Appl. Mech., 1987, vol. 22, no. 12, pp. 1166–1170. https://doi.org/10.1007/BF01375815CrossRef

Zveryaev, E.M., Berlinov, M.V., and Berlinova, M.N., The integral method of definition of basic tension condition anisotropic shell, Int. J. Appl. Eng. Res., 2016, vol. 11, no. 8, pp. 5811–5816.

Maximyuk, V.A., Storozhuk, E.A., and Chernyshenko, I.S., Stress state of flexible composite shells with reinforced holes, Int. Appl. Mech., 2014, vol. 50, no. 5, pp. 558–565. https://doi.org/10.1007/s10778-014-0654-6CrossRef

Vetrov, O.S. and Shevchenko, V.P., Study of the stress-strain state of orthotropic shells under the action of dynamical impulse loads, J. Math. Sci., 2012, vol. 183, no. 2, pp. 231–240. https://doi.org/10.1007/s10958-012-0809-0CrossRef

Vasilenko, A.T. and Urusova, G.P., The stress state of anisotropic conic shells with thickness varying in two directions, Int. Appl. Mech., 2000, vol. 35, no. 5, pp. 631–638. https://doi.org/10.1007/BF02682077CrossRef

10.

Tovstik, P.E. and Tovstik, T.P., Two-dimensional linear model of elastic shell accounting for general anisotropy of material, Acta Mech., 2014, vol. 225, no. 3, pp. 647–661. https://doi.org/10.1007/s00707-013-0986-zCrossRef

11.

Grigorenko, Y.M., Vasilenko, A.T., and Pankratova, N.D., Stress state and deformability of composite shells in the three-dimensional statement, Mech. Compos. Mater., 1985, vol. 20, no. 4, pp. 468–474. https://doi.org/10.1007/BF00609648CrossRef

12.

Vasilenko, A.T. and Sudavtsova, G.K., The stress state of stiffened shallow orthotropic shells, Int. Appl. Mech., 2001, vol. 37, no. 2, pp. 251–262. https://doi.org/10.1023/A:1011393724113CrossRef

13.

Nemish, Yu.N., Zirka, A.I., and Chernopiskii, D.I., Theoretical and experimental investigations of the stress-strain state of nonthin cylindrical shells with rectangular openings, Int. Appl. Mech., 2000, vol. 36, pp. 1620–1625. https://doi.org/10.1023/A:1011344031264CrossRef

14.

Rogacheva, N.N., The effect of surface stresses on the stress-strain state of shells, J. Appl. Math. Mech., 2016, vol. 80, no. 2, pp. 173–181. https://doi.org/10.1016/j.jappmathmech.2016.06.011CrossRef

15.

Banichuk, N.V., Ivanova, S.Yu., and Makeev, E.V., On the stress state of shells penetrating into a deformable solid, Mech. Solids, 2015, vol. 50, no. 6, pp. 698–703. https://doi.org/10.3103/S0025654415060102CrossRef

16.

Krasovsky, V.L., Lykhachova, O.V., and Bessmertnyi Ya.O., Deformation and stability of thin-walled shallow shells in the case of periodically non-uniform stress-strain state, Proc. 11th Int. Conf. Shell Structures: Theory and Applications, 2018, vol. 4, pp. 251–254. https://doi.org/10.1201/9781315166605-55.

17.

Storozhuk, E.A., Chernyshenko, I.S., and Kharenko, S.B., Elastoplastic deformation of conical shells with two circular holes, Int. Appl. Mech., 2012, vol. 48, no. 3, pp. 343–348. https://doi.org/10.1007/s10778-012-0525-yCrossRef

18.

Ivanov, V.N., Imomnazarov, T.S., Farhan, I.T.F., and Tiekolo, D., Analysis of stress-strain state of multi-wave shell on parabolic trapezoidal plan, Adv. Struct. Mater., 2020, vol. 113, pp. 257–262. https://doi.org/10.1007/978-3-030-20801-1_19CrossRef

19.

Gerasimenko, P.V. and Khodakovskiy, V.A., Numerical algorithm for investigating the stress-strain state of cylindrical shells of railway tanks, Vestn. St. Petersburg Univ.: Math., 2019, vol. 52, no. 2, pp. 207–213. https://doi.org/10.1134/S1063454119020067CrossRef

20.

Meish, V.F. and Maiborodina, N.V., Stress state of discretely stiffened ellipsoidal shells under a nonstationary normal load, Int. Appl. Mech., 2018, vol. 54, no. 6, pp. 675–686. https://doi.org/10.1007/s10778-018-0922-yCrossRef

21.

Marchuk, A.V. and Gnidash, S.V., Analysis of the effect of local loads on thick-walled cylindrical shells with different boundary conditions, Int. Appl. Mech., 2016, vol. 52, no. 4, pp. 368–377. https://doi.org/10.1007/s10778-016-0761-7CrossRef

22.

Maksimyuk, V.A., Mulyar, V.P., and Chernyshenko, I.S., Stress state of thin spherical shells with an off-center elliptic hole, Int. Appl. Mech., 2003, vol. 39, no. 5, pp. 595–598. https://doi.org/10.1023/A:1025147927708CrossRef

23.

Grigorenko, Ya.M., Grigorenko, A.Ya., and Zakhariichenko, L.I., Analysis of influence of the geometrical parameters of elliptic cylindrical shells with variable thickness on their stress-strain state, Int. Appl. Mech., 2018, vol. 54, no. 2, pp. 155–162. https://doi.org/10.1007/s10778-018-0867-1CrossRef

24.

Odinokov, V.I., Kaplunov, B.G., Peskov, A.V., and Bakov, A.V., Matematicheskoe modelirovanie slozhnykh tekhnologicheskikh protsessov (Mathematic Modeling of Complex Technological Processes), Moscow: Nauka, 2008.

25.

Odinokov, V.I., Prokudin, A.N., Sergeeva, A.M., and Sevast’yanov, G.M., Certificate of State Registration of the Computer Program 2012661389, 2012.

Titel: The Influence of Internal Factor on Crack Resistance of Shell Mold for Investment Models
verfasst von: V. I. Odinokov
A. I. Evstigneev
E. A. Dmitriev
D. V. Chernyshova
A. A. Evstigneeva
Publikationsdatum: 01.02.2022
Verlag: Pleiades Publishing
Erschienen in: Steel in Translation / Ausgabe 2/2022
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091222020152

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract—

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2022

Magnetization of a Ferromagnetic Charge during Induction Heating

Electroslag Hardfacing of Mill Rolls in a Current-Carrying Mold to Obtain Metal of Variable Chemical Composition

Studying Phase and Structural Transformation Upon Formation of Weld Joint of Rail Steel. Report 2. Isothermal Diagram of Decomposition Kinetics of Overcooled Austenite of R350LHT Rail Steel

The Features of Segregation Level Distribution for Chemical Elements in a Continuously Cast Slab

Thermodynamic Modeling of Nickel and Iron Reduction from B2O3–CaO–Fe2O3–NiO Melt by СО–СО2 and Н2–Н2О Mixtures

Investigation of Mechanism and Kinetics of Oxidation of Iron-Ore Magnetite Materials at Low Temperatures

Premium Partner

Marktübersichten