nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Lithium-Ion Pouch Cells: An Overview

verfasst von : Sumol V. Gopinadh, V. Anoopkumar, Md. Jamal Nawaz Ansari, Deepak Srivastava, Arjun Raj M., Bibin John, Aiswarya Samridh, P. S. Vijayakumar, T. D. Mercy

Erschienen in: Energy Harvesting and Storage

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Among the various configurations available for lithium-ion cells, the pouch type has been grabbing attention because of its high energy density, design flexibility, low cost and lightweight. Such a pouch pack enables further reduction in the size and weight of portable electronic devices where they power and for the same reason the pouch cells are not only suitable for terrestrial applications but also attractive for space applications too. Lithium-ion pouch cells have been successfully used in many applications including space. However, this design has certain limitations. The poor rigidity of the pouch case makes them more susceptible to external mechanical damage and swelling under elevated temperature and overcharging. Therefore, the manufacturers are constantly striving to improve the performance of pouch cells. This chapter provides a brief overview about the different aspects of lithium ion pouch cells and the various strategies introduced in upgrading the performance of this thin design.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel The Renaissance of High-Capacity Cathode Materials for Lithium Ion Cells

Nächstes Kapitel An Overview of Polymer Based Electrolytes for Li-Ion Battery Applications

Aiken CP, Xia J, Wang DY, Stevens DA, Trussler S, Dahn JR (2014) An apparatus for the study of in situ gas evolution in Li-Ion pouch cells. J Electrochem Soc 161:A1548–A1554CrossRef

Bai F, Chen M, Song W, Yu Q, Li Y, Feng Z, Ding Y (2019) Investigation of thermal management for lithium-ion pouch battery module based on phase change slurry and mini channel cooling plate. Energy 167:561–574CrossRef

Bond T, Zhou J, Cutler J (2017) electrode stack geometry changes during gas evolution in pouch-cell-type lithium ion batteries. J Electrochem Soc 164:A6158–A6162CrossRef

Bowles PG, Eweka, EI, Giwa CO, Ritichie AG (2009) Pouch cell construction. US Patent US 7,629,077 B2, assigned to Qinetiq Limited

Chen Y, Liu Y, Gong W, Zhang B (2018) Sealing life prediction of Li-ion pouch cell under uncertainties using a CZM-based degradation model. Int J Adhes Adhes 84:378–386CrossRef

Choi YH, Lim HK, Seo JH, Shin WJ, Choi JH, Park JH (2018) Development of standardized battery pack for next-generation phevs in considering the effect of external pressure on lithium-ion pouch cells. SAE Inter J Alter Power 7(3):195–206CrossRef

Dai F, Xiao Q, Yang L, Cai M, Zeng SH (2020) Making a pouch format cell and attaching a tab to the electrode. US Patent 10629941B2, assigned to GM global technology operation

Darcy E (2007) Screening Li-ion batteries for internal shorts. J Power Sources 174:575–578CrossRef

Du S, Jia M, Cheng Y, Tang Y, Zhang H, Ai L, Zhang K, Lai Y (2015) Study on the thermal behaviors of power lithium iron phosphate (LFP) aluminum-laminated battery with different tab configurations. Int J Therm Sci 89:327–336CrossRef

Dube WP (2011) Expanadable battery pack containment device for pouch battery cells. US Patent 2011/0177377 A1, assigned to Boulder Electric Vehicle

Fan L, Khodadadi JM, Pesaran AA (2013) A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles. J Power Sources 238:301–312CrossRef

Gao KN, Wang HR, He MH, Li YQ, Cui ZH, Mao Y, Zhang T (2020) Interfacial integration and roll forming of quasi-solid-state Li–O₂ battery through solidification and gelation of ionic liquid. J Power Sources 463:228179CrossRef

Guo Z, Fan Y (2016) Heat seal properties of polymer-aluminum-polymer composite films for application in pouch lithium-ion battery. RSC Adv 6:8971–8979CrossRef

https://batteryuniversity.com/learn/archive/pouch_cell_small_but_not_trouble_free

Hu J, He P, Zhang B, Wang B, Fan LZ (2011) Development and on-orbit operation of lithium-ion pouch battery for small scientific satellite ‘REIMEI.’ J Power Sources 196:8755–8763CrossRef

Hu J, He P, Zhang B, Wang B, Fan LZ (2020) Porous film host-derived 3D composite polymer electrolyte for high-voltage solid state lithium batteries. Energy Storage Mater 26:283–289CrossRef

Hunt IA, Zhao Y, Patel Y, Offer J (2016) Surface cooling causes accelerated degradation compared to tab cooling for lithium-ion pouch cells. J Electrochem Soc 163:A1846–A1852CrossRef

Huo Y, Rao Z, Liu X, Zhao J (2015) Investigation of power battery thermal management by using mini-channel cold plate. Energy Convers Manag 89:387–395CrossRef

Jacobs JK, Dasgupta S (2001) Lithium battery structure incorporating lithium pouch cells. US Patent 6,296,967 B1, Electrofuel Inc

Jeevarajan JA, Duffield BE (2014) Performance and safety of lithium-ion polymer pouch cells. J Sp Saf Eng 1:10–16

Jiang T, He P, Wang G, Shen Y, Nan CW, Fan LZ (2020) Solvent-free synthesis of thin, flexible, nonflammable garnet-based composite solid electrolyte for all-solid-state lithium batteries. Adv Energy Mater 10:1–10

John B, Cheruvally G (2017) Polymeric materials for lithium-ion cells. Polym Adv Technol 28:1528–1538CrossRef

John B, Sandhya CP, Gouri C (2018) The role of nanosized materials in lithium ion batteries. Nanomater: Phys, Chem, Biol Appl 18

Kepler KD, Vermeulen R, Hailey P, Larson A (2014) Li-ion pouch cell and a cell module. US Patent 2014/0205882 A1, assigned to Farasis Energy, Inc

Kim H-K, Choi JH, Lee K-J (2019) A numerical study of the effects of cell formats on the cycle life of lithium ion batteries. J Electrochem Soc 166:A1769–A1778CrossRef

Kim CS, Lee HY, Cho MH, Kang SB (2013) Pouch-type battery with improved safety by coating sealing unit with flame retardant and heat resistant resin composition prepared by mixing flame retardant material and heat resistant material to thermoplastic resin or thermosetting resin and production method thereof. US Patent 2013/0071696A1, assigned to EIG LTD

Kim J, Lee H, Kim C, Oh J (2015) Pouch-type battery and method of assembling for the same. US Patent US 8,936,653 B2, assigned to Samsung SDI Co., Ltd

Kim JH (2007) Pouch type lithium secondary battery. US Patent 7201998B2, assigned to Samsung SDI Co., Ltd

Kosch S, Rheinfeld A, Erhard SV, Jossen A (2017) An extended polarization model to study the influence of current collector geometry of large-format lithium-ion pouch cells. J Power Sources 342:666–676CrossRef

Lee KH, Song EH, Lee JY, Jung BH, Lim HS (2004) Mechanism of gas build-up in a Li-ion cell at elevated temperature. J Power Sources 132:201–205CrossRef

Li X, He F, Zhang G, Huang Q, Zhou D (2019) Experiment and simulation for pouch battery with silica cooling plates and copper mesh based air cooling thermal management system. Appl Therm Eng 146:866–880CrossRef

Lu J, Zhou J, Chen R, Fang F, Nie K, Qi W, Zhang JN, Yang R, Yu X, Li H, Chen L (2020) 4.2 V poly(ethylene oxide)-based all-solid-state lithium batteries with superior cycle and safety performance. Energy Storage Mater. https://doi.org/10.1016/j.ensm.2020.07.026

Ma L, Ellis L, Glazier SL, Ma X, Liu Q, Li J, Dahn JR (2018) LiPO₂F₂ as an electrolyte additive in Li[Ni_0.5Mn_0.3Co_0.2]O₂/graphite pouch cells. J Electrochem Soc 165:A891–A899

Malsen Jv, Tenpierik MJ, Looman RHJ, Cauberg JJM (2008) Heat seal strength of barrier films used in vacuum insulation panels at room temperature and at–130°C. J Plast Film Sheeting 24:35–52

Mei W, Chen H, Sun J, Wang Q (2018) Numerical study on tab dimension optimization of lithium-ion battery from the thermal safety perspective. Appl Therm Eng 142:148–165CrossRef

Murashko K, Pyrh J (2013) Three-Dimensional Thermal Model of a Lithium Ion Battery for Hybrid Mobile Working Machines: Determination of the Model Parameters in a Pouch. Cell 28:335–343

Mussa AS, Klett M, Lindbergh G, Lindström RW (2018) Effects of external pressure on the performance and ageing of single-layer lithium-ion pouch cells. J Power Sources 385:18–26CrossRef

Nie M, Xia J, Ma L, Dahn JR (2015) A comparative study of pyridine-boron trifluoride, Pyrazine-(BF₃)₂ and Triazine-(BF₃)₃ as electrolyte additives for lithium-ion cells. J Electrochem Soc 162:A2066–A2074CrossRef

Niu C, Lee H, Chen S, Li Q, Du J, Xu W, Zhang JG, Whittingham MS, Xiao J, Liu J (2019) High-energy lithium metal pouch cells with limited anode swelling and long stable cycles. Nat Energy 4:551–559CrossRef

Ooto H, Koide K, Ohira K, Yamamoto M, Abe H, Toyota H, Shimada T, Takahashi Y, Hirose K (2014) Development of stainless steel laminate li-ion pouch cells. Eur Sp Power Conf 2–6

Patil MS, Panchal S, Kim N, Lee MY (2018) Cooling performance characteristics of 20 Ah lithium-ion pouch cell with cold plates along both surfaces. Energies 11

Rieger B, Schlueter S, Erhard SV, Schmalz J, Reinhart G, Jossen A (2016) Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery. J Energy Storage 6:213–221CrossRef

Salini PS, Gopinadh SV, Kalpakasseri A, John B, Mercy TD (2020) Toward greener and sustainable Li-ion cells: an overview of aqueous-based binder systems. ACS Sustain Chem Eng 8:4003–4025CrossRef

Samba A, Omar N, Gualous H, Capron O, Van den Bossche P, Van Mierlo J (2014) Impact of tab location on large format lithium-ion pouch cell based on fully coupled tree-dimensional electrochemical-thermal modeling. Electrochim Acta 147:319–329CrossRef

Sarkar A, Shrotriya P, Chandra A (2019) Modeling of separator failure in lithium-ion pouch cells under compression. J Power Sources 435:226756CrossRef

Shi P, Cheng XB, Li T, Zhang R, Liu H, Yan C, Zhang XQ, Huang JQ, Zhang Q (2019) Electrochemical diagram of an ultrathin lithium metal anode in pouch cells. Adv Mater 31:1–8

Song W, Chen M, Bai F, Lin S, Chen Y, Feng Z (2018) Non-uniform effect on the thermal/aging performance of lithium-ion pouch battery. Appl Therm Eng 128:1165–1174CrossRef

Tagawa K, Brodd RJ (2009) Production processes for fabrication of lithium-ion batteries. In: Yoshio M, Brodd RJ, Kozawa A (eds) Lithium-ion batteries. Springer, New York, NY. https://doi.org/10.1007/978-0-387-34445-4_8.

Vamsi A, Ansari JN, Sundaresan MK, Chıtaranjan PA, John B, Samridh A, Mercy TD (2021) Structural design and testing of pouch cells. J Ener Sys 5(2):80–91

Wang DY, Xiao A, Wells L, Dahn JR (2015) Effect of mixtures of lithium hexafluorophosphate (LiPF₆) and lithium bis(fluorosulfonyl)imide (LiFSI) as salts in Li[Ni_1/3Mn_1/3 Co_1/3]O₂ /Graphite Pouch Cells. J Electrochem Soc 162:A169–A175CrossRef

Wünsch M, Kaufman J, Uwe D (2019) Investigation of the in fluence of different bracing of automotive pouch cells on cyclic lifetime and impedance spectra. J Energy Storage 21:149–155CrossRef

Xia J, Ma L, Aiken CP, Nelson KJ, Chen LP, Dahn JR (2014) Comparative study on prop-1-ene-1,3-sultone and vinylene carbonate as electrolyte additives for Li (Ni_1/3Mn_1/3Co_1/3)O₂/graphite pouch cells. J Electrochem Soc 161:A1634–A1641CrossRef

Xie J, Xie Y, Yuan C (2019) Numerical study of heat transfer enhancement using vortex generator for thermal management of lithium ion battery. Int J Heat Mass Transf 129:1184–1193CrossRef

Yue H, Li J, Wang Q, Li C, Zhang J, Li Q, Li X, Zhang H, Yang S (2018) Sandwich-like poly(propylene carbonate)-based electrolyte for ambient-temperature solid-state lithium ion batteries. ACS Sustain Chem Eng 6:268–274CrossRef

Zeng F, Chen J, Yang F, Kang J, Cao Y, Xiang M (2018) Effects of polypropylene orientation on mechanical and heat seal properties of polymer-aluminum-polymer composite films for pouch lithium-ion batteries. Materials 11(1):144CrossRef

Zhang X, Chang X, Shen Y, Xiang Y (2017) Electrochemical-electrical-thermal modeling of a pouch-type lithium ion battery: An application to optimize temperature distribution. J Energy Storage 11:249–257CrossRef

Titel: Lithium-Ion Pouch Cells: An Overview
verfasst von: Sumol V. Gopinadh
V. Anoopkumar
Md. Jamal Nawaz Ansari
Deepak Srivastava
Arjun Raj M.
Bibin John
Aiswarya Samridh
P. S. Vijayakumar
T. D. Mercy
Verlag: Springer Nature Singapore
Buch: Energy Harvesting and Storage
Print ISBN: 978-981-19-4525-0

Electronic ISBN: 978-981-19-4526-7

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-981-19-4526-7_7