nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Manufacturing and Properties of Recycled Polyethylene Films with an Inorganic Filler by the Extrusion Blow Moulding Method

verfasst von : Dorota Czarnecka-Komorowska, Karolina Wiszumirska, Tomasz Garbacz

Erschienen in: Advances in Manufacturing II

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of study was to compare properties of pure and recycled polyethylene blends with different filler content. Talc was compounded with two types of recyclable polyethylene: rLDPE and rLLDPE using a twin-screw extruder. The composites were blown moulded and the effect of the filler content on the end-use properties of blown films were investigated. Selected properties such as: mechanical, thermal and structure of composites were compared to virgin and recycled LDPE films. The effect of talc on crystallization and mechanical properties composites based on the recycled polymers as nucleating agent or/and inorganic filler were studied. It was shown that 30 wt. % amount of talc addition improved crystallization of 70L/30LL/30T. The degree of crystallinity improvement for the tensile strength, which were corresponding to crystallization analysis, so talc can play a role of heterogenous nucleation agent on PE and can be an effective filler to modify the PE matrix. The produced film is characterized by very good usable properties and satin-paper grip. The recycled composites can be used as a packaging material to group packs for ease of handling or tertiary packaging for ease of transport.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Manufacturing and Properties of Biodegradable Composites Based on Thermoplastic Starch/Polyethylene-Vinyl Alcohol and Silver Particles

Nächstes Kapitel Hybrid Epoxy Composites Reinforced with Flax Fiber and Basalt Fiber

PlasticsEurope: Plastics—The Facts 2016: An Analysis of European Plastics Production, Demand and Waste Data. PlasticsEurope (2016)

Vilaplana, F., Ribes-Greus, A., Karlsson, S.: Analytical strategies for the quality assessment of recycled high-impact polystyrene: a combination of thermal analysis, vibrational spectroscopy, and chromatography. Anal. Chim. Acta 604, 18–28 (2007)CrossRef

La Mantia, F.P., Curto, D.: Recycling of Post-consumer Greenhouse Polyethylene Films: Blends with Polyamide 6 in Recycling of Plastic Materials, ed. Francesco Paolo La Mantia, pp. 27–38 (1993)

Michalska-Pożoga, I., Rydzkowski, T., Mazur, P., Sadowska, O., Kumar Thakur, V.: A study on the thermodynamic changes in the mixture of polypropylene (PP) with varying contents of technological and post-user recyclates for sustainable nanocomposites. Vacuum 146, 641–648 (2017)CrossRef

Wróblewska-Krepsztul, J., Rydzkowski, T., Borowski, G., Szczypiński, M., Klepka, T., Kumar Thakur, V.: Recent progress in biodegradable polymers and nanocomposite-based packaging materials for sustainable environment. Int. J. Polym. Anal. Charact. 23(4), 383–395 (2018)CrossRef

Franz, R., Mauer, A., Welle, F.: European survey on post-consumer poly(ethylene terephthalate) materials to determine contamination levels and maximum consumer exposure from food packages made from recycled PET. Food Addit. Contam. 21, 265–286 (2004)CrossRef

Komolprasert, V., Lawson, A.: Residual contaminants in recycled polyethylene terephthalate – effects of washing and drying. In: 208th American Chemical Society National Meeting, Washington DC, pp. 435–444 (1994)

Coulier, L., Orbons, H.G.M., Rijk, R.: Analytical protocol to study the food safety of (multiple-)recycled, high-density polyethylene (HDPE) and polypropylene (PP) crates: influence of recycling on the migration and formation of degradation products. Polym. Degrad. Stab. 92, 2016–2025 (2007)CrossRef

Knitter, M., Dobrzyńska-Mizera, M.: Mechanical properties of isotactic polypropylene modified with thermoplastic potato starch. Mech. Compos. Mater. 51(2), 245–252 (2015)CrossRef

10.

Tor-Świątek, A., Garbacz, T., Jachowicz, T.: Quantitative assessment of the microscopic structure of extruded and injected low-density polyethylene modified with microspheres by image analysis. Cell. Polym. 35(2), 67–84 (2016)CrossRef

11.

PlasticsEurope: Annual Review 2017–2018. PlasticsEurope (2018)

12.

European Commision: A European Strategy for Plastics in a Circular Economy, Brussels (2018)

13.

Elkoun, S., Huneault, M.A., McCormick, K., Puterbaugh, F., Kale, L.: LLDPE-based mono- and multilayer blown films: effect of processing parameters on properties. Polym. Eng. Sci. 45(9), 1214–1221 (2005)CrossRef

14.

Czarnecka-Komorowska, D., Wiszumirska, K., Garbacz, T.: Films LDPE/LLDPE made from post-consumer plastic: processing, structure, mechanical properties. Adv. Sci. Technol. Res. J. 12(3), 134–142 (2018)CrossRef

15.

Ersoy, B., Dikmen, S., Yildiz, A., Goren, R., Elitok, Ö.: Mineralogical and physicochemical properties of talc from Emirdağ, Afyonkarahisar, Turkey. Turk. J. Earth Sci. 22, 632–644 (2013)

16.

Leong, Y.W., Abu Bakar, M.B., Mohd Ishak, Z.A., Ariffin, A., Pukanszky, B.: Comparison of the mechanical properties and interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites. J. Appl. Polym. Sci. 91, 3315–3326 (2004)CrossRef

17.

Klepka, T., Jeziorska, R., Szadkowska, A.: Thin wall products made of modified high density polyethylene. Przem. Chem. 94(8), 1352–1355 (2015)

18.

Czyżewski, P., Bieliński, M., Sykutera, D., Jurek, M., Ryl, Ł., Gronowski, M., Hoppe, H.: Secondary use of ABS co-polymer recyclates for the manufacture of structural elements in the FFF technology. Rapid Prototyping J. 24(9), 1447–1454 (2018)CrossRef

19.

Macko, M., Flizikowski, J.: The method of the selection of comminution design for non-brittle materials. In: Conference Proceedings AIChE, (The American Institute of Chemical Engineers) Annual Meeting in Salt Lake City - session: Comminution - Experiments, Theory & Modeling (2010)

20.

Garbacz, T., Palutkiewicz, P.: Geometrical properties of polymer films produced in blown molding extrusion process. Polym. Process. 3(5–6), 116–125 (2016). (in Polish)

21.

ISO 291:2008 Plastics – Standard atmospheres for conditioning and testing

22.

ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets

23.

PN-EN 14477:2005 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods

24.

ISO 11357-2:2013 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height

25.

Wunderlich, B.: Macromolecular Physics: Crystal Nucleation, Growth, Annealing. Academic Press, New York (1976)

26.

ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

27.

Pan, W., Ding, X., Gu, H., Hu, G.: Effect of talc on crystallization and properties of polypropylene. Am. J. Mater. Res. 2(4), 35–43 (2015)

28.

Pikosz, P., Iwko, J., Mrzygłód, R.: Effect of talc content in LDPE on composite properties. Plastics in Industry (2016). (in Polish)

Titel: Manufacturing and Properties of Recycled Polyethylene Films with an Inorganic Filler by the Extrusion Blow Moulding Method
verfasst von: Dorota Czarnecka-Komorowska
Karolina Wiszumirska
Tomasz Garbacz
Verlag: Springer International Publishing
Buch: Advances in Manufacturing II
Print ISBN: 978-3-030-16942-8

Electronic ISBN: 978-3-030-16943-5

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-16943-5_54

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht